The URL can be used to link to this page

Ordinance No. 1177ORDINANCE NO. 1177 AN ORDINANCE OF THE CITY COUNCIL OF THE CITY OF VERNON AMENDING CHAPTER 7, FIRE REGULATION, OF THE CODE OF THE CITY OF VERNON; ADOPTING BY REFERENCE THE 2010 CALIFORNIA FIRE CODE INCLUDING AMENDMENTS, ADDITIONS AND DELETIONS, AND REPEALING ALL ORDINANCES AND PARTS OF ORDINANCES IN CONFLICT THEREWITH WHEREAS, the City of Vernon by Ordinance 1137 adopted the 2007 California Fire Code with certain modifications and changes; and WHEREAS, Health and Safety Code Section 18938(b) provides the most recent edition of the Uniform Fire Code of the international Conference of Building Officials and the Western Fire Chiefs Association, Inc., as referenced in the California Building Standards Code, shall apply to all occupancies in the state and shall become effective 180 days after publication in the California Building Standards Code by the California Building Standards Commission (hereinafter referred to as the "Commission") or at a later date after publication established by said Commission; and WHEREAS, the 2010 California Fire Code and Appendices has been published by the Commission and incorporated in the California Code of Regulations Title 24, Part 9; and WHEREAS, the Commission has determined that the aforesaid code, as published in the California Building Standards Code, shall become effective January 1, 2011; and WHEREAS, California Health and Safety Code Sections 17958, 17958.5, 17958.7 and 18941.5 allow certain amendments to the code to be made by a local government provided findings of necessity can be made; and WHEREAS, unless superseded and expressly repealed, references in City forms, documents and regulations to the chapters and sections of the former California Fire Code 2007, shall be construed to apply to the corresponding provisions contained within the California Fire Code 2010. Ordinance 1137 of the City of Vernon and all other ordinances or parts of ordinances in conflict herewith are hereby superseded and expressly repealed; and WHEREAS, the amendments, deletions and additions to the code set forth in this ordinance are intended as amendments, deletions and additions to the corresponding requirements of the California Building Standards Code, based upon the findings set forth above and outlined in the City Staff Report on Fire Code Adoption dated November 1, 2010; and WHEREAS, some of the proposed amendments to the code are presently in the Vernon City Code; and WHEREAS, the City Council of the City of Vernon is authorized, pursuant to Section 50022.2 et seq. of the California Government Code to adopt the above -mentioned code and other uniform codes as the primary code by reference in whole or in part and that the primary code may adopt by reference a secondary code in whole or in part; and WHEREAS, the Fire Code contains provisions for a Board of Appeals and permits the City Council to determine the membership of the board of appeals; and WHEREAS, pursuant to Government Code Section 50022.3, the City Council gave a first reading to this Ordinance and the title of said code to be adopted and standards, and a duly noticed public hearing was held on December 6, 2010, for the purpose of considering the adoption. 2 THE CITY COUNCIL OF THE CITY OF VERNON HEREBY ORDAINS: SECTION 1: The City Council of the City of Vernon hereby finds and determines that the recitals contain herein and above are true and correct. SECTION 2: Fire Code The City of Vernon hereby adopts by reference the 2010 California Fire Code, including secondary codes and standards referred to therein.; as amended in Section 3 herein. SECTION 3: Article II of Chapter 7, Fire Regulations', of the Code of the City of Vernon is hereby amended as follows: A. Section 7.10 is hereby amended to read as follows: "Sec. 7. 10 2010 California Fire Code, adopted. The 2010 California Fire Code, including Appendices B, BB, D, H, and.K.and standards contained therein, copyrighted by the California Building Standards Commission subject however, to the amendments, additions, and deletions set forth in this article, are hereby adopted by reference as the Fire Code of the City of Vernon." B. Section 7.12 is hereby amended to read as follows: "Sec. 7. 12 Amendments, Additions, and Deletions. The 2010 California Fire Code is hereby amended as follows: (a) Section 104.7.2 of the 2010 Edition of the California Fire Code is hereby amended to add the following sentence to the end of the paragraph to read as follows: When there is a fire, explosion, hazardous materials incident, or other potential life or serious property threatening situation, the fire code official can request the owner, occupant, or operator to hire a private fire protection or hazardous materials 3 investigator, acceptable to the fire code official and at the expense of the owner or operator, to provide a full report of the incident, including, without limitation, such matters as origin, cause, circumstances or proposed solutions to the problem. (b) Chapter 1, Section 104_12 of the 2010 California Fire Code is hereby added to read as follows: 104.12 False alarms. The fire code official is authorized to assess a service charge, as set forth by resolution, against the person owning or responsible for an alarm system when a fire department response occurs as a result of the third false alarm at the same address or location within any twelve month period, and for each subsequent false alarm thereafter, or against any person who intentionally, or in violation of the law reports, or causes to be reported, a false alarm to any department of the City of Vernon that an emergency exists requiring immediate or emergency response by the City of Vernon Fire Department. (c) Section 104.13 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 104.13 Vehicle/trailer creating hazard. Whenever it is determined by a fire code official or his representative that an unattended or attended vehicle/trailer parked or stopped upon any public street, road, alley, right-of-way, or upon private property, creates an immediate danger or fire hazard to itself, other vehicles, persons, or surrounding property, the fire official shall request the local law enforcement agency to cause the removal of the vehicle/trailer to a safe location, and the local law enforcement agency shall cause the removal at the expense of the registered owner of the vehicle/trailer, and a notice of the rd removal shall be given to the registered owner as soon as feasible. (d) Section 104.14 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 104.14 Outside obstructions. No person shall park or place any material or vehicle in any established exit way, driveway, gateway, or alleyway between buildings that would hamper the ingress of fire equipment in case of a fire, explosion, hazardous materials incident, or other potential life or serious property threatening situation. When in the opinion of the fire code official or his representative, any driveway, gateway, or alleyway between buildings is so obstructed by objects, materials, or vehicles as to impede the ingress or egress of said way, it shall be removed immediately upon order of the fire code official or his representative. When such obstruction is a vehicle, it may be removed or impounded at the owner's expense and as prescribed by law. (e) Section 104.15 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 104.15 Fire safety officer. When in the opinion of the fire chief, it is necessary for the preservation of life and property, due to the hazardous nature of an event, production, operation, or function, the fire chief shall require the owner, agent, production company, or lessee to employ or cause the employment of one or more fire department safety officers to be on duty at such place during such activity. (f) Section 105.1.4 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 5 105.1.4 Investigation fees; work without a permit. Whenever any work, operation or action for which a permit is required by this code has been commenced without first obtaining said permit, an investigation shall be made before a permit may be issued for such work. An investigation fee, in addition to the permit fee, shall be collected whether or not a permit is then subsequently issued. The investigation fee shall be double the amount of the permit fee set forth in the fee schedule. (g) Section 105.1.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 105.1.1 Permits required. Permits required by this code shall be obtained from the fire code official. Issued permits shall be conspicuously displayed on the premises designated therein at all times and shall be readily available for inspection by the fire code official. Permit fees shall be as set forth in a fee schedule adopted by resolution by the City Council. (h) Section 105.6.25 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 105.6.25 Lumber yards, woodworking plants, and pallet storage. A permit is required for storage of processing of lumber exceeding 100,000 board feet (8,333 ft3) (236 m3), or outside pallet storage in excess of 240 units and inside storage in excess of 64 units. (i) Section 105.6.48 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.6.48 General use permit. In addition to the permits required by Section 105.6, a general use permit shall be obtained from the fire code official for any activity or operation not specifically addressed in this article, which in the judgment of the fire code C official, is possible or likely to produce conditions hazardous to life or property. (j) Section 105.7.15.is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.7.15 High -piled storage. A construction permit is required for installation or modification of high -piled combustible storage in racks. When using any building or portion thereof exceeding twenty-five hundred (2,500) square feet for high -piled combustible storage in racks, a floor plan showing the dimensions and location of the rack system shall be submitted with the application for such permits. (k) Chapter 1, Section 105.7.16 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.7.16 Roof obstructions. A construction permit is required for installation of a roof photovoltaic system when constructed on a building's roof that covers more than 50% or 10,000 square feet of the total surface area whichever is less. Exceptions: 1. Buildings that are four or more stories in height and protected with an approved automatic fire extinguishing system throughout. 2. Non -habitable structures including but not limited to shade structures, private carports, solar trellises, etc. (1) Section 105.8 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.8 Responsibility of permittee. Fire permits shall be presumed to incorporate the provision that the applicant, the applicant's agent, employees or contractors shall carry out the proposed work 7 in accordance with the approved plans and with all requirements of this code and any other laws or regulations applicable thereto, whether specified or not. No approval shall relieve or exonerate any person from the responsibility of complying with the provisions and intent of this code. (m) Section 108.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 108.1 Board of appeals established. The city council shall act as a board of appeals in making a correct determination of any appeal arising from actions of the fire code official. The fire code official shall be an ex officio member of said board but shall not vote on any matter before the board. Appeals shall be made in writing and the appellant may appear in person before the city council or be represented by an attorney and may introduce evidence to support his claim. Appeals shall be heard at reasonable times at the convenience of the city council but not later than thirty days after the receipt thereof. (n) Section 113.6 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 113.6 Fees for services, establishment; review. The fire code official is authorized to collect fees for services established or modified by resolution of the City Council. The fire code official shall review fees charged for such services at least annually and shall, with approval of the City Administrator, recommend changes to the council when costs for such services make it appropriate. (o) Section 113.7 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 0 113.7 Operational permit fees. The fee set forth and established for the particular activity by a resolution of the City Council shall accompany all operational permits required pursuant to the provisions of this code. (p) Section 113.8 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 113.8 Construction permit fees. Construction permit fees shall be paid at the time of the permit issuance. In addition to the permit fee, the applicant shall pay a plan check fee. The fee set forth and established for the particular activity by a resolution of the City Council shall accompany all construction permits required pursuant to the provisions of this code. (q) Section 113.9 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 113.9 Re -inspection fee. Whenever an inspection is scheduled under Section 105.2.2 and the permittee is not ready for inspection and does not inform the fire code official or his representative at least two hours prior to the scheduled inspection, a re -inspection fee may be assessed. (r) Section 114 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: SECTION 114 RESPONSIBILITY 114.1 Responsibility for costs. Persons who personally or through another willingly, negligently, or in violation of law set a fire, allow a fire to be set, allow a fire kindled or attended by them to escape from their control, allow any hazardous material to escape from their control, neglect to properly comply with any 9 written notice of the fire chief, or willfully or negligently allow the continuation of a violation of this code and amendments thereto are liable for the expenses of fighting the dire, for the expenses of any investigation, or for the expenses incurred during a hazardous materials incident. Such expenses shall be a charge against that person. Such charge shall constitute a debt of such person, and is collectible by the City in the same manner as in the case of an obligation under a contract, expressed or implied and a lien may be attached to the involved property. 114.2 Reporting injuries caused by fires. Any person, firm, corporation, or agency that maintains a hospital, pharmacy, or any other medical or first aid service shall immediately report to the fire chief any person suffering from any fire -related injury. The report shall be made both by telephone and in writing, and shall include the name and address of the injured person, the person's whereabouts, and the character and extent of the person's injuries. (s) Chapter 2, The definitions of "awning," "false alarm," "fire chief," "fire code official," "fire safety officer," and "safety container" are hereby added to Section 202 of Chapter 2 of the 2010 Edition of the California Fire Code in alphabetical order to read as follows: AWNING. An architectural projection that provides weather protection, identity, or decoration and is wholly supported by the building to which it is attached. An awning is compromised of a lightweight frame structure over which a 'covering is attached. FALSE ALARM. The willful and knowing initiation or transmission of a signal, message or other notification of an event of fire when Piz no such danger exists, or the activation of any fire alarm system due to malfunction, mechanical or electrical defect, improper operation or procedure by any person, or a false oral or written report to any department of the City of Vernon that an emergency exists requiring immediate or emergency response by the Vernon Fire Department. FIRE CHIEF. The chief officer of the fire department serving the jurisdiction FIRE CODE OFFICIAL. The fire chief or other member of the fire service appointed by the fire chief charged with the administration and enforcement of this code. FIRE SAFETY OFFICER. A sworn member of the fire department serving the jurisdiction assigned to preserve life and property at a location, due to the hazardous nature of the activity of an -event, production, operation, or function. SAFETY CONTAINER. An approved container of not over 5 gallons capacity, having a self -closing lid and spout cover. (t) Section 304.1.1.1 of the 2010 Edition of the California Fire Code is hereby added to read as follows: 304.1.1.1 Waste material near photovoltaic array system. Accumulation of waste material shall not be permitted underneath nor within 10 feet from a mounted photovoltaic array system. (u) Section 311.2.2 Exceptions 1 and 2, of the 2010 Edition of the California Fire Code is hereby deleted. (v) Section 312.2 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 312.2 Guard posts. Guard posts shall comply with all of the following requirements: 11 1. Constructed of steel not less than 8 inches (204 mm) in diameter and concrete filled. 2. Spaced no more than 4 feet (1219 mm) between posts on center. 3. Set not less than 4 feet (1219 mm) deep in a concrete footing of not less than an 18 inch (457.2 mm) diameter. 4. Set with the top of the posts not less than 4 feet (1219 mm) above ground. 5. Located not less than 3 feet (914 mm) from the protected object. 6. Posts shall be painted safety yellow (w) Section 315.3.3 is hereby added to Chapter 3 of the 2010 Edition of the California Fire Code to read as follows: 315.3.3 Pallet storage height and total accumulation for storage. Pallet storage in the open shall not exceed 15 feet (4,572 mm) in height and a total aggregate content not exceeding 6,750 cubic feet. Aisle separation of 15 feet (4,572 mm) is required before the next pile or stack is created. Storage of pallets in excess of 240 pallets requires a permit per Sec. 105.6.25. (x) Section 315.3.4 is hereby added to Chapter 3 of the 2010 Edition of the California Fire Code to read as follows: 315.3.4 Pallets. All pallets must be stacked so that there is visibility through the stacks to the adjacent aisles, or so organized to assure that no temporary living facilities or places of refuge are hidden from view. Pallets shall be stacked or piled with due regard to the stability of piles, and in no case higher than 15 feet (4,572 mm). 12 (y) Chapter 3, Section 315.3.4.1 is hereby added to Chapter 3 of the 2010 Edition of the California Fire Code to read as follows: 315.3.4.1 Clearance around pallets. Aisles between and around open pallet stacks shall be at least 15 feet (4,572 mm) in width and maintained free from accumulated rubbish, equipment, or other articles or materials. (z) Section 315.3.4.2 is hereby added to Chapter 3 of the 2010 Edition of the California Fire Code to read as follows: 315.3.4.2 Pallet storage next to structure/awning. When pallets are stored near a structure/awning, the height of the storage shall be restricted to no higher than the structure/awning and cannot exceed the height of the structure/awning, or 15 feet (4.,572 mm), whichever is less. (aa) Section 503.2.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 503.2.1. Dimensions. Fire apparatus access roads shall have an unobstructed width of not less than 27 feet (8,229 mm) and an unobstructed vertical clearance of not less than 15 feet (4,572 mm) . (bb) Section 504.4 is hereby added to Chapter 5 of the 2010 Edition of the California Fire Code is hereby added to read as follows: 504.4. Roof top access and safety. Roof top solar photovoltaic systems shall be in accordance with Appendix K. (cc) Section 507.5 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 13 507.5. Fire Hydrant Systems. When any portion of the facility or building protected is in excess of 150 feet from a water supply on a public street, as measured by an approved route around the exterior of the facility or building, on -site fire hydrants and mains capable of supplying the required fire flow shall be provided when required by the chief. (dd) Section 507.5.5 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: Sec. 507.5.5. Clear space around hydrants. Clear space of 31 feet (9,448.8 mm) in front of, 4 feet (1,219 mm) in rear of and 10 feet (3,048 mm) on both sides shall be maintained around each onsite hydrant. (ee) Section 901.4.5 is hereby added to Chapter 9 of the 2010 Edition of the Ca-lif.ornia Fire Code to read as follows: 901.4.5 Protection of fire protection systems and equipment. Fire protection systems and equipment subject to possible vehicular damage shall be adequately protected with guard posts in accordance with Section 312 Vehicle Impact Protection, and modifications adopted under this code. (ff) Section 1504.2 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 1504.2 Location of spray -finishing operations. All inside or outside spray -finishing operations shall be conducted in an approved spray booth constructed in accordance with Section 1504. (gg) Section 3301.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 14 3301.1. Prohibited and limited acts. Explosive materials shall not be manufactured, tested or stored within the limits of the City of Vernon. (hh) Section 3404.2.9.6.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 3404.2.9.6.1. Locations where above -ground tanks are prohibited. Storage of Class I and Class II liquids in above ground tanks outside of buildings within the City of Vernon and in areas 1,000 feet (304,800 mm) or more from the outside boundary of a kindergarten through 12th grade public school shall be in approved containers not exceeding 10,000 gallons in size. In areas of a lot or parcel within 1,000 feet (304,800 mm) of the outside boundary of said school, the only Class I or Class II liquids approved for storage in above ground tanks is diesel fuel which r shall be in approved containers and shall be limited to either two (2) 1,000 gallon tanks or one (1) 2,000 gallon tank. (ii) Section 3801.4 is hereby added to Chapter 38 of the 2010 Edition of the California Fire Code to read as follows: 3801.4 Inside storage or use. No LP -gases of any type or mixture shall be permitted in any occupancy either for sale, use or storage without approval of the fire code official. (jj) Section 3803.2.2.1 is hereby added to Chapter 38 of the 2010 Edition of the California Fire Code to read as follows: Sec. 3801.2.2.1 Portable cylinders on motorized equipment. The use of portable cylinders of LP -gas as motorized equipment fuel in occupancies is limited as follows: LP -gas fuel tanks on motorized equipment are limited to two per vehicle with a combined capacity not to exceed 50 pounds. Refilling of tanks shall not be permitted 15 within the occupancy and shall be permitted only in approved locations determined by the fire code official. (kk) Section 3804.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 3804.1. Storage of liquefied petroleum gases. Storage and transportation of LP -gas and the installation and maintenance of pertinent equipment shall be in accordance with NFPA 58 and shall be subject to the approval of the fire code official. Storage is permitted within the limits of the City of Vernon except within 1,000 (304,800 mm) feet of a kindergarten through 12th grade public school. Exception: Storage of LP -gas not exceeding 2,000 gallons per parcel in approved containers is permitted in all areas within the limits of the City of Vernon. (11) Section 3804.3.2 is hereby added to Chapter 38 of the 2010 Edition of the California Fire Code to read as follows: 3804.3.2 Tank orientation. Unless special protection is provided and approved by the fire code official, containers of LP -gas shall be oriented so that their longitudinal axes do not point toward other LP -gas containers, vital process equipment, control rooms, loading stations, flammable liquid storage tanks or required fire access roads. (mm) Appendix C of the 2010 Edition of the California Fire Code is hereby deleted. (nn) Section D103.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: D103.1. Access road. The dimension of the fire access road turnarounds shall be in accordance with City standards. 16 (oo) Appendix K is hereby added to the 2010 Edition of the California Fire Code to read as follows: r-AWWINHO WC/ ROOF SOLAR PHOTOVOLTAIC SYSTEMS SECTION K101 SCOPE K1O1.1 Scope. This appendix shall apply to the design, construction, and installation of all solar photovoltaic systems when located on the roof of a building. Exception: 1. Buildings that are four or more stories in height and protected with an approved automatic fire extinguishing system throughout. 2.Non-habitable structures include, but are not limited to, shade structures, private carports, solar trellises, etc. K101.2 Permits. The fire code official shall review and approve the installation of roof solar photovoltaic systems on buildings that obstruct more than 500 or 10,000 square feet of the total roof surface area prior to the building code official issuing a permit for the installation for such roof obstructions. See section 105.7 for required construction permits. 17 K101.3 Required construction document information. All roof top installations submitted for approval shall include the following: 1. Site plan to scale depicting the following: a. Dimensions of the building b. Location of all structures on site. c. Street address of building. d. Access from street to building. e. Location of roof top solar arrays, gardens, or landscaped areas. f. Location of disconnects. g. Location of signage. h. Location of required access paths. i..Northern reference 2. Roof and Elevation plan showing the following: a. Array or landscape placement. b. Roof ridge lines. c. Eave lines. d. Equipment on roof. e. Vents, skylights, roof hatches, etc. 3. Location and wording of all markings, labels and warning signs. 4. Building photographs that may be useful in the evaluation of the garden, landscaping, or array placement. I SECTION K102 DEFINITIONS K102.1 Definitions. For the purpose of this appendix, certain terms are defined as follows: ACCESS PATHWAY. A required walking pathway that is designed to provide emergency access to firefighters. ARRAY. An uninterrupted section of solar photovoltaic panels or modules or a group of interconnected sub -arrays. GRID. The electrical system that is on the service side of the electric meter. Designation of ridge, hip, and valley does not apply to roofs with 2-in-12 or less pitch. All roof dimensions are measured to centerlines. INVERTER. A device used to convert direct current (DC) electricity from the solar system to alternating current (AC) electricity for use in the building's electrical system or the grid. ROOF ACCESS POINT. An area that does not require ladders to be placed over building openings (i.e., windows, vents, or doors), and that are located at structurally strong points of building construction and in locations where ladders will not be obstructed by tree limbs, wires, signs or other overhead obstructions. SOLAR PHOTOVOLTAIC SYSTEM. A system of component parts that receives sunlight and converts it into electricity. SUS -ARRAY. Uninterrupted sections of solar photovoltaic panels interconnected into an array. TRAVEL DISTANCE. The walking distance between two points. VENTING CUT OUT. Section(s) in an array that are designed to accommodate emergency ventilating procedures. 19 SECTION K103 ROOF SOLAR PHOTOVOLTAIC SYSTEMS K103.1. Solar photovoltaic systems. The requirements of section K103 applies to all solar photovoltaic systems installed on the roof of buildings regardless of system size or if used for residential and commercial purposes. Roof solar photovoltaic systems shall be designed, constructed and installed in accordance with sections K103.2 through K103.5.3. K103.2 Marking. Photovoltaic systems shall be marked. Marking is needed to provide emergency responders with appropriate warning and guidance with respect to isolating the solar electric system. This can facilitate identifying energized electrical lines that connect the solar panels to the inverter, as these should not be cut when venting for smoke removal. Materials used for marking shall be weather resistant. UL 969 shall be used as a standard for weather rating (UL listing of markings is not required). K103.2.1 Building's electrical system main service disconnect marking. The building's main electrical service disconnect shall be marked. K103.2.1.1 Single and two dwelling unit residential buildings. The marking shall be placed within the main service disconnect. Exception: If the main service disconnect is operable with the service panel closed, then the marking shall be placed on the outside cover.. 20 K103.2.1.2 Commercial and industrial buildings. The marking shall be placed adjacent to the main service disconnect in a location clearly visible from the location where the lever is,operated. K103.2.1.3 Marking content and format. Marking content and format shall be as follows. 1. Marking content: "CAUTION: SOLAR ELECTRIC SYSTEM CONNECTED" 2. Red background 3. White lettering 4. Minimum 3/8" letter height 5. All capital letters 6. Arial or similar font, non -bold 7. Reflective weather resistant material suitable for the environment (durable adhesive materials must meet this requirement) K103.2.2 Photovoltaic circuits marking. Photovoltaic circuit marking is required on all interior and exterior photovoltaic DC circuit conduit, raceways, enclosures, cable assemblies and junction boxes to alert firefighters to avoid cutting them. Marking shall be placed every 10 feet (3,048 mm), at turns, and above and/or below penetrations, and at all photovoltaic circuit combiner and junction boxes. K103.2.2.1 Marking content and format. Marking content and format shall be as follows. 1. Marking content: "CAUTION: SOLAR CIRCUIT" 2. Red background 3. White lettering 4. Minimum 3/8" letter height 21 5. All capital letters 6. Arial or similar font, non -bold 7. Reflective weather resistant material suitable for the environment (durable adhesive materials must meet this requirement) K103.2.3 Inverter marking. No markings are required for the inverter unless the inerter is used also as a required remote electrical disconnect. K103.2.4 Remote electrical disconnect marking. Marking shall be located immediately next to the remote electrical disconnect control as follows: 1. Marking content: "CAUTION: SOLAR CIRCUIT DISCONNECT" 2. Red background 3. White lettering 4. Minimum 3/8" letter height 5. All capital letters 6. Arial or similar font, non -bold 7. Reflective weather resistant material suitable for the environment (durable adhesive materials must meet this requirement) K103.3 Remote electrical disconnect. Photovoltaic circuits shall be equipped with a means for remote electrical disconnect located downstream from the photovoltaic array at the point where the photovoltaic circuit first enters the structure, or at another approved location. The manual control to operate the remote electrical disconnect shall be located within five feet of the building's main 22 electrical panel. The remote electrical disconnect shall be listed and meet the requirements of the California Electrical Code. Exceptions: 1. Photovoltaic circuits contained in rigid or electrical metallic tubing running between the array combiner box and the main electrical panel which are entirely exterior to the building need not be equipped with a means of remote electrical disconnect other than the disconnects intrinsic to the system. 2. Photovoltaic circuits contained in rigid or electrical metallic tubing running between the array combiner box and the main electrical panel that run through the interior of the building when installed a minimum of 18" below the roof assembly when measured parallel to the surface of the roof. 3. The photovoltaic system inverter may be used for remote electrical disconnect when the inverter is located immediately upstream of the roof penetration where the circuit enters the structure. K103.4 Access pathways and emergency ventilation. Access and spacing requirements shall be provided in order to ensure firefighter access to the roof, provide access pathways to specific areas of the roof, provide for venting cut out areas, and to provide emergency egress from the roof. For the purpose of access pathways and emergency ventilation, designation of ridge, hip, and valley does not apply to roofs with 2- in-12 or less pitch. All roof dimensions are measured to centerlines. K103.4.1 Alternative materials and methods. Alternative materials and methods per Section 104.9 for access pathways or venting cut outs may be requested for approval by the fire code official due to: 23 1. Unique site specific limitations 2. Alternative access opportunities (as from adjoining roofs) 3. Ground level access to the roof area in question 4. Other adequate venting cut out opportunities when approved by the fire- code official. 5. Adequate venting cut out areas afforded by panel set back from other roof top equipment (for example: shading or structural constraints may leave significant areas open for ventilation near HVAC equipment.) 6. Automatic ventilation device. 7. New technology, methods, or other innovations that ensure adequate fire department access pathways and ventilation opportunities. K103.4.2 Single and two dwelling unit residential buildings access pathways and venting cut outs. Access pathways and venting cut outs for single and two dwelling unit residential buildings shall be provided as per Section K103.4.2.1 through K103.4.2.4. K103.4.2.1 Hip roof layout. Solar modules shall be located in a manner that provides one three (31) foot wide clear access pathway from the eave to the ridge on each roof slope where solar modules are located. The access pathway shall be located at a structurally strong location on the building, such as a bearing wall. K103.4.2.2 Single roof ridge. Solar modules shall be located in a manner that provides two three (31) foot wide access pathways from the eave to the ridge on each roof slope where solar modules are located. 24 K103.4.2.3 Roof hips and valleys. Solar modules shall be located no closer than one and one half (1.51) feet to a hip or a valley if modules are to be placed on both sides of a hip or valley. If the solar modules are to be located on only one side of a hip or valley, that is of equal length then the panels may be placed directly adjacent to the hip or valley. K103.4.2.4 Venting cut out areas. Solar modules shall be located no higher than three (31) feet below the ridge. K103.4.3 Commercial and industrial buildings and multi -residential buildings containing three or more dwelling units required access pathways and venting cut outs. Access pathways and venting cut outs for commercial and industrial buildings and multi -residential buildings containing three or more dwelling unit s shall be provided as accordance with Section K103.4.3.1 through K103.4.3.2.6. Exception: If the fire code official determines that the roof configuration is similar to that found in single and two dwelling unit residential buildings, the design requirements found in Section K103.4.2 may be utilized. K103.4.3.1 Array dimension. Arrays shall be no greater than 150 feet (45,720 mm) by 150 feet (45,720 mm) in distance in either axis. K103.4.3.2 Access pathways. Access pathways shall be established in the design of the photovoltaic system installation. Access pathways shall be provided in accordance with Section K103.4.3.2.1 through K103.4.3.2.5. 25 K103.4.3.2.1 Access pathways perimeter of the roof. There shall be a minimum six (61) foot (1,828 mm) wide clear perimeter around the edges of the roof. Exception: If either axis of the building is 250 feet (976,200 mm) or less, there shall be a minimum four (4') feet (1,219 mm) wide clear perimeter around the edges of the roof. K103.4.3.2.2 Access pathway location. The center line axis of access pathways shall run on structural members or over the next closest structural member nearest to the center lines of the roof. K103.4.3.2.3 Access pathway center line. The center line axis of access pathways shall be provided in both axis of the roof. K103.4.3.2.4 Access pathway alignment. Access pathways shall be in a straight line and provide not less than four (4') feet (1,219 mm) clear to skylights, ventilation hatches or roof standpipes. K103.4.3.2.5 Access pathway around roof access hatches. Access pathways shall provide not less than four (4') feet (1,219 mm) of clearance around roof access hatch with at least one not less than four (41) feet (1,219 mm) clear pathway to parapet or roof edge. K103.4.3.2.6 Venting cut out areas. Venting cut outs between array sections shall be either: 1. An access pathway eight (81) feet (2,438 mm) or greater in width. 2. An access pathway that is four (4') feet (1,219 mm) or greater in width and bordering on existing roof skylights or ventilation hatches. REA 3.An access pathway that is four (4') feet (1,219 mm) or greater in width and bordering four (41) feet (1,219 mm) by eight (81) feet (2,438 mm) venting cut outs every twenty (20') feet (6,096 mm) on alternating sides of the access pathway. K103.5 Location of conductors. Conduit, wiring systems and wiring raceways for photovoltaic circuits shall be provided in accordance with Section K103.5.1 through K103.5.3. K103.5.1 Conductor location. Conduit, wiring systems, and wiring raceways shall be located as close as possible to the ridge or hip or valley and from the hip or valley as directly as possible to an outside wall to reduce trip hazards and maximize venting cut out areas. K103.5.2 Conductors between sub arrays and DC combiner boxes. Conduit runs between sub arrays and to DC combiner boxes shall use the design that minimizes the total amount of conduit on the roof by taking the shortest path from the array to the DC combiner box. The DC combiner boxes are to be located such that conduit runs are minimized in the pathways between arrays. K103.5.3 Conduit within enclosed spaces. To limit the hazard of cutting live conduit in venting operations, DC wiring shall be run in metallic conduit or raceways when located within enclosed spaces in a building and shall be run, to the maximum extent possible, along the bottom of load -bearing members. 27 SECTION 4: Ordinances Repealed. Any ordinance, part of an ordinance, or code section in conflict with this Ordinance is hereby repealed. SECTION 5: Severability. If any section, subsection, sentence, clause, or phrase or word of this ordinance is for any reason held to be void or unconstitutional, such decision shall not affect the validity of the remaining portions of this ordinance; it being the intention of the City Council of the City of Vernon to adopt and pass this ordinance and each section, subsection, sentence, clause or phrase thereof irrespective of the fact that one or more of the sections, subsections, clauses, sentences or phrases thereof may be declared void or unconstitutional. SECTION 6: Copies on File with City Clerk. Pursuant to Government Code Section 50022.6, one certified copy the 2010 California Fire Code shall be made available for public inspection in the office of the City Clerk. SECTION 7: Effective Date. This ordinance shall be in full force and effect on January 1, 2011. APPROVED AND ADOPTED this 20t° day of September, 2011. Name: Hilario Gonzales Title: Mayor L-n=I! m W STATE OF CALIFORNIA ) ) ss COUNTY OF LOS ANGELES ) I, WILLARD G. YAMAGUCHI, City Clerk of the City of Vernon, do hereby certify that the foregoing Ordinance, being Ordinance No. 1177, was duly and regularly introduced at a meeting of the City Council of the City of Vernon, held in the City of Vernon on Monday, November 1, 2010, and thereafter adopted at a meeting of said City Council held on Tuesday, September 20, 2011, by the following vote: AYES: Councilmembers: Mayor Gonzales, Davis, Maisano, McCormick, Newmire NOES: Councilmembers: None ABSENT: Councilmembers: None And thereafter was duly signed by the Mayor or Mayor Pro-Tem of the City of Vernon. Executed this day of September, 2011, at Vernon, California. (SEAL) - 29 - CITY CLERK'S OFFICE INTEROFFICE MEMORANDUM DATE: September 21, 2011 TO: Jed Hulsey, Fire Marshal FROM: Willard Yamaguchi, City Clerk V6 RE: Ordinance No. 1177 - An Ordinance of the City Council of the City of Vernon Amending Chapter 7, Fire Regulation, of the Code of the City of Vernon; Adopting by Reference the 2010 California Fire Code Including Amendments, Additions and Deletions, and Repealing All Ordinances and Parts of Ordinances in Conflict Therewith Transmitted herewith for your transmittal to the State is a certified copy of Ordinance No. 1177 referenced above, which was approved by City Council on September 20, 2011. Please see that a copy of the transmittal letter is sent to the City Clerk's office for the file. Thank you. WY:dj Attachment c: Ana Barcia Mark Whitworth Ordinance No. 1177 Resolution No. 2010-176 CERTIFICATE STATE OF CALIFORNIA ) ) ss COUNTY OF LOS ANGELES) I, Willard Yamaguchi, City Clerk of the City of Vernon, County of Los Angeles, State of California, hereby certify that the attached is a full and complete copy of: ORDINANCE NO. 1177 - An Ordinance of the City Council of the City of Vernon Amending Chapter 7, Fire Regulation, of the Code of the City of Vernon; Adopting by Reference the 2010 California Fire Code Including Amendments, Additions and Deletions, and Repealing All Ordinances and Parts of Ordinances in Conflict Therewith IN WITNESS WHEREOF, I have hereunto set my hand and affixed the official Seal of the City �o/yVernon, County of Los Angeles, State of California, on this off/ day of September 2011. SEAL: City Clerk CITY OF VERNON CITY COUNCIL MEETING SEPTEMBER 20, 2011 SUMMARY FOR ORDINANCE NOS. 1160 — 1167, 1169 —1181 AND 1183 A CERTIFIED COPY OF THE FULL TEXT OF PROPOSED ORDINANCE NOS. 1160 —1167, 1169 —1181 AND 1183 ARE AVAILABLE IN THE OFFICE OF THE CITY CLERK LOCATED AT 4305 SANTA FE AVENUE, VERNON, CALIFORNIA. On September 20, 2011, the City Council of the City of Vernon is proposing to adopt Ordinance Nos. 1160 — 1167, 1169 —1181 and 1183 amending certain provisions of the Vernon City Code as follows: Ordinance No. 1160 was duly introduced at a regular meeting of the City Council of the City of Vernon held on October 26, 2009. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1160 amending Sections 13.48 to 13.73 and adding Section 13.74 to Article IV, Hazardous Materials Monitoring Program, of Chapter 13, Health and Sanitation, of the Vernon City Code as follows: 1. To change the title of Article IV of Chapter 13 to Hazardous Materials Monitoring and Control Program; 2. To update and clarify definitions and other provisions in accordance with State hazardous material laws, regulations and regulatory options; 3. To renumber the following sections: Section 13.55 to 13.57, Section 13.57 to 13.55, Section 13.72 to 13.73 and Section 13.73 to 13.74; and 4. To add a section regarding unlawful hazardous materials management. Ordinance No. 1161 was duly introduced at a regular meeting of the City Council of the City of Vernon held on October 19, 2009. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1161 adopting by reference the Department of Water Resources State Model Landscaping Ordinance, amending Sections 25.100, 25.101, 25.102, 25.103; 25.104, 25.105, 25.106(b), 25.107(a) and adding Section 25.112 to Article VI, Water Conservation of Chapter 25, Water, of the Vernon City Code as follows: 1. To meet the requirements of the Metropolitan Water District Model Efficient Landscape Ordinance; and 2. To add a section regarding the Department of Water Resources State Model Efficient Landscape Ordinance. Ordinance No. 1162 was duly introduced at a regular meeting of the City Council of the City of Vernon held on October 26, 2009. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1162 amending Sections Article XIV of Chapter 2 of the Vernon City Code relating to the recall of Members of the City Council. Ordinance No. 1163 was duly introduced at a regular meeting of the City Council of the City of Vernon held on January 4, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1163, an Emergency Zoning Ordinance prohibiting the establishment of marijuana dispensaries, stores, co-ops, or marijuana cultivation operations in any zoning district within the City by amending Sections 26.2.9 and 26.4.1- 4, of the Vernon City Code as follows: 1. To add a definition of marijuana dispensary, store, co-op, or cultivation operation; and 2. To prohibit the use in any Zone or Overlay Zone of the City. Ordinance No. 1164 was duly introduced at a regular meeting of the City Council of the City of Vernon held on January 4, 2010. 'The City Council of the City of Vernon is proposing to adopt Ordinance No. 1164, a zoning ordinance prohibiting the establishment of marijuana dispensaries, stores, co-ops, or marijuana cultivation operations in any zoning district within the City by amending Sections 26.2.9 and 26.4.1-4, of the Vernon City Code as follows: 1. To add a definition of marijuana dispensary, store, co-op, or cultivation operation; and 2. To prohibit the use in any Zone or Overlay Zone of the City. Ordinance No. 1165 was duly introduced at a regular meeting of the City Council of the City of Vernon held on January 4, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1165 amending Chapter 2 of the Code of the City of Vernon, relating to City Council elections to implement campaign finance regulations. Ordinance No. 1166 was duly introduced at a regular meeting of the City Council of the City of Vernon held on February 1, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1166 temporarily suspending acceptance and review of non-exclusive solid waste franchise agreement applications. Ordinance No. 1167 was duly introduced at a regular meeting of the City Council of the City of Vernon held on February 1, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1167 amending Chapter 2 of the Code of the City of Vernon, relating to City Council elections and the appointment of Council members in uncontested elections. Ordinance No. 1169 was duly introduced at a regular meeting of the City Council of the City of Vernon held on June 7, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1169 abolishing the Police and Fire Commission. Ordinance No. 1170 was duly introduced at a regular meeting of the City Council of the City of Vernon held on June 7, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1170 repealing Section 7.3 of the Vernon City Code authorizing the delegation of enforcement responsibilities for certain provisions of the Fire Code and other Fire Safety Regulations. Ordinance No. 1171 was duly introduced at a regular meeting of the City Council of the City of Vernon held on June 7, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1171 adding Section 13.88 to the Vernon City Code to establish fees and charges pursuant to the aboveground petroleum storage act. Ordinance No. 1172 was duly introduced at a regular meeting of the City Council of the City of Vernon held on June 14, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1172 amending Sections 2.34, 2.35, 2.36, 2.37 and 2.39 of Article V, Public Library, of Chapter 2, Administration, of the Vernon City Code as follows: Establishing a Board of Library Trustees; composition; appointment of members; and 2. Appointing the Mayor as president and the Mayor pro tempore as president pro tempore of the Board of Library Trustees. Ordinance No. 1173 was duly introduced at a regular meeting of the City Council of the City of Vernon held on July 19, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1173 amending the Vernon City Code to authorize the Fire Chief to report directly to the City Council and defining the term "reporting to the City Council." Ordinance No: 1174 was duly introduced at a regular meeting of the City Council of the City of Vernon held on August 2, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1174 amending the Vernon City Code to clarify that the City Council appoints the purchasing agent. Ordinance No. 1175 was duly introduced at a regular meeting of the City Council of the City of Vernon held on March 1, 2011. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1175 establishing a three-year restriction on cutting of newly paved or resurfaced streets and amending the Vernon City Code regarding deposits, surety bonds and liability insurance for encroachment permits and licenses. Ordinance No. 1176 was duly introduced at a regular meeting of the City Council of the City of Vernon held on November 1, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1176 amending Chapter 24, building and construction, of the Code of the City of Vernon; adopting by reference (1) the 2010 California Building Code; (2) the 2010 California Electrical Code, and the 2006 edition of the ICC Electrical Code administrative provisions; (3) the 2010 California Mechanical Code; (4) the 2010 California Plumbing Code; (5) the 2010 California Existing Building Code; (6) the 2009 International Existing Building Code; (7) the 2010 California Residential Code; (8) the 2010 California Green Building Standards Code; and (9) the 2010 California Energy Code, including amendments, additions and deletions, and repealing all ordinances and parts of ordinances in conflict therewith. Ordinance No. 1177 was duly introduced at a regular meeting of the City Council of the City of Vernon held on November 1, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1177 amending Chapter 7, fire regulation, of the Code of the City of Vernon; adopting by reference the 2010 California Fire Code including amendments, additions and deletions, and repealing all ordinances and parts of ordinances in conflict therewith. Ordinance No. 1178 was duly introduced at a regular meeting of the City Council of the City of Vernon held on November 15, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1178 extending the existing time limits for the effectiveness of and the receipt of tax increment for the industrial redevelopment project. Ordinance No. 1179 was duly introduced at a regular meeting of the City Council of the City of Vernon held on November 15, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1179 eliminating the existing time limits on incurring debt for the first amended industrial redevelopment project. Ordinance No. 1180 was duly introduced at a regular meeting of the City Council of the City of Vernon held on December 6, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1180 amending section 2.1 of the Vernon City Code relating to the time and place of City Council meetings. Ordinance No. 1181 was duly introduced at a regular meeting of the City Council of the City of Vernon held on December 6, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1181 extending the existing time limits for commencement of eminent domain proceedings to acquire property within the industrial redevelopment project. Ordinance No. 1183 was duly introduced at a regular meeting of the City Council of the City of Vernon held on May 26, 2011. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1183 establishing a Housing Commission pursuant to the provisions of the City Charter of the City of Vernon and specifying the membership and duties of the Housing Commission. Willard G. Yamaguchi, City Clerk of the City of Vernon, does hereby certify that Ordinance Nos. 1160 —1167, 1169 —1181 and 1183 were duly introduced to the City Council of the City of Vernon at a regular meeting and said Ordinances are scheduled to be approved and adopted at a regular meeting of the City Council to be held on September 20, 2011. Dated: Willard d. Y ag chi Cit erk Page 1 of 1 Juarez, Debbie From: Barcia, Ana Sent: Tuesday, September 13, 2011 12:14 PM To: 'Bianca @ Eastern Group' Cc: Yamaguchi, Willard; Enomoto, Kristen; Juarez, Debbie Subject: 09-15-11 Publication Attachments: First Summary for all Ordinances.doc Hello Bianca, Please include the attached Summary of Ordinances in the September 15, 2011, publication. Please respond to this email confirming receipt. You may forward the invoice to my attention. Thank you, Ana Barcia City of Vernon T: 323) 583-8811 ex 286 F: 323) 826-1439 abarcia@ci.vernon.ca.us CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify the sender. Please destroy the original transmission and its attachments without reading or saving in any manner. 9/13/2011 CITY OF VERNON CITY COUNCIL MEETING SEPTEMBER 20, 2011 SUMMARY FOR ORDINANCE NOS. 1160 —1167, 1169 —1181 AND 1183 A CERTIFIED COPY OF THE FULL TEXT OF PROPOSED ORDINANCE NOS. 1160 —1167, 1169 — 1181 AND 1183 ARE AVAILABLE IN THE OFFICE OF THE CITY CLERK LOCATED AT 4305 SANTA FE AVENUE, VERNON, CALIFORNIA. On September 20, 2011, the City Council of the City of Vernon is proposing to adopt Ordinance Nos. 1160 —1167, 1169 —1181 and 1183 amending certain provisions of the Vernon City Code as follows: Ordinance No. 1160 was duly introduced at a regular meeting of the City Council of the City of Vernon held on October 26, 2009. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1160 amending Sections 13.48 to 13.73 and adding Section 13.74 to Article IV, Hazardous Materials Monitoring Program, of Chapter 13, Health and Sanitation, of the Vernon City Code as follows: 1. To change the title of Article IV of Chapter 13 to Hazardous Materials Monitoring and Control Program; 2. To update and clarify definitions and other provisions in accordance with State hazardous material laws, regulations and regulatory options; 3. To renumber the following sections: Section 13.55 to 13.57, Section 13.57 to 13.55, Section 13.72 to 13.73 and Section 13.73 to 13.74; and 4. To add a section regarding unlawful hazardous materials management. Ordinance No. 1161 was duly introduced at a regular meeting of the City Council of the City of Vernon held on October 19, 2009. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1161 adopting by reference the Department of Water Resources State Model Landscaping Ordinance, amending Sections 25.100, 25.101, 25.102, 25.103, 25.104, 25.105, 25.106(b), 25.107(a) and adding Section 25.112 to Article VI, Water Conservation of Chapter 25, Water, of the Vernon City Code as follows: 1. To meet the requirements of the Metropolitan Water District Model Efficient Landscape Ordinance; and 2. To add a section regarding the Department of Water Resources State Model Efficient Landscape Ordinance. Ordinance No. 1162 was duly introduced at a regular meeting of the City Council of the City of Vernon held on October 26, 2009. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1162 amending Sections Article XIV of Chapter 2 of the Vernon City Code relating to the recall of Members of the City Council. Ordinance No. 1163 was duly introduced at a regular meeting of the City Council of the City of Vernon held on January 4, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1163, an Emergency Zoning Ordinance prohibiting the establishment of marijuana dispensaries, stores, co-ops, or marijuana cultivation operations in any zoning district within the City by amending Sections 26.2.9 and 26.4.1- 4, of the Vernon City Code as follows: 1. To add a definition of marijuana dispensary, store, co-op, or cultivation operation; and 2. To prohibit the use in any Zone or Overlay Zone of the City. Ordinance No. 1164 was duly introduced at a regular meeting of the City Council of the City of Vernon held on January 4, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1164, a zoning ordinance prohibiting the establishment of marijuana dispensaries, stores, co-ops, or marijuana cultivation operations in any zoning district within the City by amending Sections 26.2.9 and 26.4.1-4, of the Vernon City Code as follows: 1. To add a definition of marijuana dispensary, store, co-op, or cultivation operation; and 2. To prohibit the use in any Zone or Overlay Zone of the City. Ordinance No. 1165 was duly introduced at a regular meeting of the City Council of the City of Vernon held on January 4, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1165 amending Chapter 2 of the Code of the City of Vernon, relating to City Council elections to implement campaign finance regulations. Ordinance No. 1166 was duly introduced at a regular meeting of the City Council of the City of Vernon held on February 1, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1166 temporarily suspending acceptance and review of non-exclusive solid waste franchise agreement applications. Ordinance No. 1167 was duly introduced at a regular meeting of the City Council of the City of Vernon held on February 1, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1167 amending Chapter 2 of the Code of the City of Vernon, relating to City Council elections and the appointment of Council members in uncontested elections. Ordinance No. 1169 was duly introduced at a regular meeting of the City Council of the City of Vernon held on June 7, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1169 abolishing the Police and Fire Commission. Ordinance No. 1170 was duly introduced at a regular meeting of the City Council of the City of Vernon held on June 7, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1170 repealing Section 7.3 of the Vernon City Code authorizing the delegation of enforcement responsibilities for certain provisions of the Fire Code and other Fire Safety Regulations. Ordinance No. 1171 was duly introduced at a regular meeting of the City Council of the City of Vernon held on June 7, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1171 adding Section 13.88 to the Vernon City Code to establish fees and charges pursuant to the aboveground petroleum storage act. Ordinance No. 1172 was duly introduced at a regular meeting of the City Council of the City of Vernon held on June 14, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1172 amending Sections 2.34, 2.35, 2.36, 2.37 and 2.39 of Article V, Public Library, of Chapter 2, Administration, of the Vernon City Code as follows: Establishing a Board of Library Trustees; composition; appointment of members; and 2. Appointing the Mayor as president and the Mayor pro tempore as president pro tempore of the Board of Library Trustees. Ordinance No. 1173 was duly introduced at a regular meeting of the City Council of the City of Vernon held on July 19, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1173 amending the Vernon City Code to authorize the Fire Chief to report directly to the City Council and defining the term "reporting to the City Council." Ordinance No. 1174 was duly introduced at a regular meeting of the City Council of the City of Vernon held on August 2, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1174 amending the Vernon City Code to clarify that the City Council appoints the purchasing agent. Ordinance No. 1175 was duly introduced at a regular meeting of the City Council of the City of Vernon held on March 1, 2011. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1175 establishing a three-year restriction on cutting of newly paved or resurfaced streets and amending the Vernon City Code regarding deposits, surety bonds and liability insurance for encroachment permits and licenses. Ordinance No. 1176 was duly introduced at a regular meeting of the City Council of the City of Vernon held on November 1, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1176 amending Chapter 24, building and construction, of the Code of the City of Vernon; adopting by reference (1) the 2010 California Building Code; (2) the 2010 California Electrical Code, and the 2006 edition of the ICC Electrical Code administrative provisions; (3) the 2010 California Mechanical Code; (4) the 2010 California Plumbing Code; (5) the 2010 California Existing Building Code; (6) the 2009 International Existing Building Code; (7) the 2010 California Residential Code; (8) the 2010 California Green Building Standards Code; and (9) the 2010 California Energy Code, including amendments, additions and deletions, and repealing all ordinances and parts of ordinances in conflict therewith. Ordinance No. 1177 was duly introduced at a regular meeting of the City Council of the City of Vernon held on November 1, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1177 amending Chapter 7, fire regulation, of the Code of the City of Vernon; adopting by reference the 2010 California Fire. Code including amendments, additions and deletions, and repealing all ordinances and parts of ordinances in conflict therewith. Ordinance No. 1178 was duly introduced at a regular meeting of the City Council of the City of Vernon held on November 15, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1178 extending the existing time limits for the effectiveness of and the receipt of tax increment for the industrial redevelopment project. Ordinance No. 1179 was duly introduced at a regular meeting of the City Council of the City of Vernon held on November 15, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1179 eliminating the existing time limits on incurring debt for the first amended industrial redevelopment project. Ordinance No. 1180 was duly introduced at a regular meeting of the City Council of the City of Vernon held on December 6, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1180 amending section 2.1 of the Vernon City Code relating to the time and place of City Council meetings. Ordinance No. 1181 was duly introduced at a regular meeting of the City Council of the City of Vernon held on December 6, 2010. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1181 extending the existing time limits for commencement of eminent domain proceedings to acquire property within the industrial redevelopment project. Ordinance No. 1183 was duly introduced at a regular meeting of the City Council of the City of Vernon held on May 26, 2011. The City Council of the City of Vernon is proposing to adopt Ordinance No. 1183 establishing a Housing Commission pursuant to the provisions of the City Charter of the City of Vernon and specifying the membership and duties of the Housing Commission. Willard G. Yamaguchi, City Clerk of the City of Vernon, does hereby certify that Ordinance Nos. 1160 — 1167, 1169 —1181 and 1183 were duly introduced to the City Council of the City of Vernon at a regular meeting and said Ordinances are scheduled to be approved and adopted at a regular meeting of the City Council to be held on September 20, 2011. Dated: Willard G. Yamaguchi, City Clerk Juarez, Debbie From: Barcia, Ana Sent: Tuesday, September 20, 2011 4:17 PM To: 'Bianca @ Eastern Group' Cc: Yamaguchi, Willard; Enomoto, Kristen; Juarez, Debbie Subject: 09-22-11 Publication Attachments: Second Summary for Ordinance Nos 1160-1167 1169-1181 1183 (2).doc Hello Bianca, Please include the attached Second Summary of Ordinances in the September 22, 2011, publication. Please respond to this email confirming receipt. You may forward the invoice to my attention. Thank you, Ana Barcia City of Vernon T: 323) 583-8811 ex 28( F: 323) 826-1439 abarciaAci.vernon ca.us CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify the sender. Please destroy the original transmission and its attachments without reading or saving in any manner. CITY OF VERNON CITY COUNCIL MEETING SEPTEMBER 20, 2011 SUMMARY FOR ORDINANCE NOS. 1160 — 1167, 1169 —1181 AND 1183 A CERTIFIED COPY OF THE FULL TEXT OF ADOPTED ORDINANCE NOS. 1160 — 1167, 1169 —1181 AND 1183 ARE AVAILABLE IN THE OFFICE OF THE CITY CLERK LOCATED AT 4305 SANTA FE AVENUE, VERNON, CALIFORNIA. Ordinance Nos. 1160— 1167, 1169 —1181 and 1183 were duly introduced at a regular meeting of the City Council of the City of Vernon and approved and adopted by said Council at a regular meeting held on September 20, 2011. On September 20, 2011, the City Council of the City of Vernon adopted Ordinance Nos. 1160 — 1167, 1169 — 1181 and 1183 amending certain provisions of the Vernon City Code as follows: Ordinance No. 1160 was adopted by the City Council of the City of Vernon amending Sections 13.48 to 13.73 and adding Section 13.74 to Article IV, Hazardous Materials Monitoring Program, of Chapter 13, Health and Sanitation, of the Vernon City Code as follows: 1. To change the title of Article IV of Chapter 13 to Hazardous Materials Monitoring and Control Program; 2. To update and clarify definitions and other provisions in accordance with State hazardous material laws, regulations and regulatory options; 3. To renumber the following sections: Section 13.55 to 13.57, Section 13.57 to 13.55, Section 13.72 to 13.73 and Section 13.73 to 13.74; and 4. To add a section regarding unlawful hazardous materials management. Ordinance No. 1161 was adopted by the City Council of the City of Vernon adopting by reference the Department of Water Resources State Model Landscaping Ordinance, amending Sections 25.100, 25.101, 25.102, 25.103, 25.104, 25.105, 25.106(b), 25.107(a) and adding Section 25.112 to Article VI, Water Conservation of Chapter 25, Water, of the Vernon City Code as follows: 1. To meet the requirements of the Metropolitan Water District Model Efficient Landscape Ordinance; and 2. To add a section regarding the Department of Water Resources State Model Efficient Landscape Ordinance. Ordinance No. 1.162 was adopted by the City Council of the City of Vernon amending Article XIV of Chapter 2 of the Vernon City Code relating to the recall of Members of the City Council. Ordinance No. 1163, an emergency Zoning Ordinance, was adopted by the City Council of the City of Vernon prohibiting the establishment of marijuana dispensaries, stores, co- ops, or marijuana cultivation operations in any zoning district within the City by amending Sections 26.2.9 and 26.4.1-4, of the Vernon City Code as follows: 1. To add a definition of marijuana dispensary, store, co-op, or cultivation operation; and 2. To prohibit the use in any Zone or Overlay Zone of the City. Ordinance No. 1164, a zoning ordinance, was adopted by the City Council of the City of Vernon prohibiting the establishment of marijuana dispensaries, stores, co-ops, or marijuana cultivation operations in any zoning district within the City by amending Sections 26.2.9 and 26.4.1-4, of the Vernon City Code as follows: 1. To add a definition of marijuana dispensary, store, co-op, or cultivation operation; and 2. To prohibit the use in any Zone or Overlay Zone of the City. Ordinance No. 1165 was adopted by the City Council of the City of Vernon amending Chapter 2 of the Code of the City of Vernon, relating to City Council elections to implement campaign finance regulations. Ordinance No. 1166 was adopted by the City Council of the City of Vernon temporarily suspending acceptance and review of non-exclusive solid waste franchise agreement applications. Ordinance No. 1167 was adopted by the City Council of the City of Vernon amending Chapter 2 of the Code of the City of Vernon, relating to City Council elections and the appointment of Council members in uncontested elections. Ordinance No. 1169 was adopted by the City Council of the City of Vernon abolishing the Police and Fire Commission. Ordinance No. 1170 was adopted by the City Council of the City of Vernon repealing Section 7.3 of the Vernon City Code authorizing the delegation of enforcement responsibilities for certain provisions of the Fire Code and other Fire Safety Regulations. Ordinance No. 1171 was adopted by the City Council of the City of Vernon adding Section 13.88 to the Vernon City Code to establish fees and charges pursuant to the aboveground petroleum storage act. Ordinance No. 1172 was adopted by the City Council of the City of Vernon amending Sections 2.34, 2.35, 2.36, 2.37 and 2.39 of Article V, Public Library, of Chapter 2, Administration, of the Vernon City Code as follows: 1. Establishing a Board of Library Trustees; composition; appointment of members; and 2. Appointing the Mayor as president and the Mayor pro tempore as president pro tempore of the Board of Library Trustees. Ordinance No. 1173 was adopted by the City Council of the City of Vernon amending the Vernon City Code to authorize the Fire Chief to report directly to the City Council and defining the term "reporting to the City Council." Ordinance No. 1174 was adopted by the City Council of the City of Vernon amending the Vernon City Code to clarify that the City Council appoints the purchasing agent. Ordinance No. 1175 was adopted by the City Council of the City of Vernon establishing a three-year restriction on cutting of newly paved or resurfaced streets and amending the Vernon City Code regarding deposits, surety bonds and liability insurance for encroachment permits and licenses. Ordinance No. 1176 was adopted by the City Council of the City of Vernon amending Chapter 24, building and construction, of the Code of the City of Vernon; adopting by reference (1) the 2010 California Building Code; (2) the 2010 California Electrical Code, and the 2006 edition of the ICC Electrical Code administrative provisions; (3) the 2010 California Mechanical Code; (4) the 2010 California Plumbing Code; (5) the 2010 California Existing Building Code; (6) the 2009 International Existing Building Code; (7) the 2010 California Residential Code; (8) the 2010 California Green Building Standards Code; and (9) the 2010 California Energy Code, including amendments, additions and deletions, and repealing all ordinances and parts of ordinances in conflict therewith. . Ordinance No. 1177 was adopted by the City Council of the City of Vernon amending Chapter 7, fire regulation, of the Code of the City of Vernon; adopting by reference the 2010 California Fire Code including amendments, additions and deletions, and repealing all ordinances and parts of ordinances in conflict therewith. Ordinance No. 1178 was adopted by the City Council of the City of Vernon extending the existing time limits for the effectiveness of and the receipt of tax increment for the industrial redevelopment project. Ordinance No. 1179 was adopted by the City Council of the City of Vernon eliminating the existing time limits on incurring debt for the first amended industrial redevelopment project. Ordinance No. 1180 was adopted by the City Council of the City of Vernon amending section 2.1 of the Vernon City Code relating to the time and place of City Council meetings. Ordinance No. 1181 was adopted by the City Council of the City of Vernon extending the existing time limits for commencement of eminent domain proceedings to acquire property within the industrial redevelopment project. Ordinance No. 1183 was adopted by the City Council of the City of Vernon establishing a Housing Commission pursuant to the provisions of the City Charter of the City of Vernon and specifying the membership and duties of the Housing Commission. Willard G. Yamaguchi, City Clerk of the City of Vernon, does hereby certify that Ordinance Nos. 1160 —1167, 1169 — 1181 and 1183 were duly introduced and approved by the City Council of the City of Vernon at a regular meeting and adopted and passed by said Council at a regular meeting held on September 20, 2011 by the following roll call vote: AYES: COUNCILMEMBERS NOES: COUNCILMEMBERS ABSTAIN: COUNCILMEMBERS Dated: September 20, 2011 Mayor Gonzales, Davis, McCormick, Maisano, Newmire None None Willard G. Yamaguchi, City Clerk DECEIVE® RECEIVED SEP 0 8 2011 SEP 12 2011 CITY ADMINISTRATION CITY CLERK'S OFFICE STAFF REPORT, CITY ATTORNEY'S OFFICE DATE: September 7, 2011 TO: Honorable Mayor and City Council FROM: Michael B. Montgomery, Interim City Attorne�ert-,/ RE: Adoption of Existing Ordinances SUMMARY It was recently discovered that recent ordinances were not published after adoption. RECOMMENDATIONS It is recommended that Ordinance Nos. 1160 — 1167, 1169 — 1181 and 1183 be considered for adoption at the September 20`" meeting. Upon fifteen (15) days of adoption summaries for all ordinances listed shall be published in the Vernon Sun. Rather than enclosing voluminous documents in your packets, certified copies of Ordinance Nos. 1160 — 1167, 1169 —1181 and 1183 are available in the City Clerk's office. There are no changes from the ordinances originally introduced. ORDINANCE NO. 1177 AN ORDINANCE OF THE CITY COUNCIL OF THE CITY OF VERNON AMENDING CHAPTER 7, FIRE REGULATION, OF THE CODE OF THE CITY OF VERNON; ADOPTING BY REFERENCE THE 2010 CALIFORNIA FIRE CODE INCLUDING AMENDMENTS, ADDITIONS AND DELETIONS, AND REPEALING ALL ORDINANCES AND PARTS OF ORDINANCES IN CONFLICT THEREWITH WHEREAS, the City of Vernon by Ordinance 1137 adopted the 2007 California Fire Code with certain modifications and changes; and WHEREAS, Health and Safety Code Section 18938(b) provides the most recent edition of the Uniform Fire Code of the international Conference of Building Officials and the Western Fire Chiefs Association, Inc., as referenced in the California Building Standards Code, shall apply to all occupancies in the state and shall become effective 180 days after publication in the California Building Standards Code by the California Building Standards Commission (hereinafter referred to as the "Commission") or at a later date after publication established by said Commission; and WHEREAS, the 2010 California Fire Code and Appendices has been published by the Commission and incorporated in the California Code of Regulations Title 24,,Part 9; and WHEREAS, the Commission has determined that the aforesaid code, as 'published in the California Building Standards Code, shall become effective January 1, 2011; and WHEREAS, California Health and Safety Code Sections 17958, 17958.5, 17958.7 and 18941.5 allow certain amendments to the code to be made by a local government provided findings of necessity can be made; and WHEREAS, unless superseded and expressly repealed, references in City forms, documents and regulations to the chapters and sections of the former California Fire Code 2007, shall be construed to apply to the corresponding provisions contained within the California Fire Code 2010. Ordinance 1137 of the City of Vernon and all other ordinances or parts of ordinances in conflict herewith are hereby superseded and expressly repealed; and WHEREAS, the amendments, deletions and additions to the code set forth in this ordinance are intended as amendments, deletions and additions to the corresponding requirements of the California Building Standards Code, based upon the findings set forth above and outlined in the City Staff Report on Fire Code Adoption dated November 1, 2010; and WHEREAS, some of the proposed amendments to the code are presently in the Vernon City Code; and WHEREAS, the City Council of the City of Vernon is authorized, pursuant to Section 50022.2 et seq. of the California Government Code to adopt the above -mentioned code and other uniform codes as the primary code by reference in whole or in part and that the primary code may adopt by reference a secondary code in whole or in part; and WHEREAS, the Fire Code contains provisions for a Board of Appeals and permits the City Council to determine the membership of the board of appeals; and WHEREAS, pursuant to Government Code Section 50022.3, the City Council gave a first reading to this Ordinance and the title of said code to be adopted and standards, and a duly noticed public hearing was held on December 6, 2010, for the purpose of considering the adoption. 2 A THE CITY COUNCIL OF THE CITY OF VERNON HEREBY ORDAINS: SECTION 1: The City Council of the City of Vernon hereby finds and determines that'the recitals contain herein and above are true and correct. SECTION 2: Fire Code The City of Vernon hereby adopts by reference the 2010 California Fire Code, including secondary codes and standards referred to therein; as amended in Section 3 herein. SECTION 3: Article II of Chapter 7, Fire Regulations, of the Code of the City of Vernon is hereby amended as follows: A. Section 7.10 is hereby amended to read as follows: "Sec. 7. 10 2010 California Fire Code, adopted. The 2010 California Fire Code, including Appendices B, BB, D, H, and K and standards contained therein, copyrighted by the California Building Standards Commission subject however, to the amendments, additions, and deletions set forth in this article, are hereby adopted by reference as the Fire Code of the City of Vernon." B. Section 7.12 is hereby amended to read as follows: "Sec. 7. 12 Amendments, Additions, and Deletions. The 2010 California Fire Code is hereby amended as follows: (a) Section 104.7.2 of the 2010 Edition of the California Fire Code is hereby amended to add the following sentence to the end of the paragraph to read as follows: When there is a fire, explosion., hazardous.materials incident, or other potential life or serious property threatening situation, the fire code official can request the owner, occupant, or operator to hire a private fire protection or hazardous materials 3 investigator, acceptable to the fire code official and at the expense of the owner or operator, to provide a full report of the incident, including, without limitation, such matters as origin, cause, circumstances or proposed solutions to the problem. (b) Chapter 1, Section 104.12 of the 2010 California Fire Code is hereby added to read as follows: 104.12 False alarms. The fire code official is authorized to assess a service charge, as set forth by resolution, against the person owning or responsible for an alarm system when a fire department response occurs as a result of the third false alarm at the same address or location within any twelve month period, and for each subsequent false alarm thereafter, or against any person who intentionally, or in violation of the law reports, or causes to be reported, a false alarm to any department of the City of Vernon that an emergency exists requiring immediate or emergency response by the City of Vernon Fire Department. .(c) Section 104.13 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 104.13 Vehicle/trailer creating hazard. Whenever it is determined by a fire code official or his representative that an unattended or attended vehicle/trailer parked or stopped upon any public street, road, alley, right-of-way, or upon private property, creates an immediate danger or fire hazard to itself, other vehicles, persons, or surrounding property, the fire official shall request the local law enforcement agency to cause the removal of the vehicle/trailer to a safe location, and the local law enforcement agency shall cause the removal at the expense of the registered owner of the vehicle/trailer, and a notice of the Ed removal shall be given to the registered owner as soon as feasible. (d) Section 104.14 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 104.14 Outside obstructions. No person shall park or place any material or vehicle in any established exit way, driveway, gateway, or alleyway between buildings that would hamper the ingress of fire equipment in case of a fire, explosion, hazardous materials incident, or other potential life or serious property threatening situation. When in the opinion of the fire code official or his representative, any driveway, gateway, or alleyway between buildings is so obstructed by objects, materials, or vehicles as to impede the ingress or egress of said way, it shall be removed immediately upon order of the fire code official or his representative. When such obstruction is a vehicle, it may be removed or impounded at the owner's expense and as prescribed by law. (e) Section 104.15 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 104.15 Fire safety officer. When in the opinion of the fire chief, it is necessary for the preservation of life and property, due to the hazardous nature of an event, production, operation, or function, the fire chief shall require the -owner, agent, production company, or lessee to employ or cause the employment of one or more fire department safety officers to be on duty at such place during such activity. (f), Section 105.1.4 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 61 105.1.4 Investigation fees; work without a permit. Whenever any work, operation or action for which a permit is required by this code has been commenced without first obtaining said permit, an investigation shall be made before a permit.may be issued for such work. An investigation fee, in addition to the permit fee, shall be collected whether or not a permit is then subsequently issued. The investigation fee shall be double the amount of the permit fee set forth in the fee schedule. (g) Section 105.1.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 105.1.1 Permits required. Permits required by this code shall be obtained from the fire code official. Issued permits shall be conspicuously displayed on the premises designated therein at all times and shall be readily available for inspection by the fire code official. Permit fees shall be as set forth in a fee schedule adopted by resolution by the City Council. (h) Section 105.6.25 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 105.6.25 Lumber yards, woodworking plants, and pallet storage. A permit is required for storage of processing of lumber exceeding 100,000 board feet (8,333 ft3) (236 m3), or outside pallet storage in excess of 240 units and inside storage in excess of 64 units. (i) Section 105.6.48 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.6.48 General use permit. In addition to the permits required by Section 105.6, a general use permit shall be obtained from the fire code official for any activity or operation not specifically addressed in this article, which in the judgment of the fire code 6 official, is possible.or likely to produce conditions hazardous to life or property. (j) Section 105.7.15 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.7.15 High -piled storage. A construction permit is required for installation or modification of high -piled combustible storage in racks —When using any building or portion thereof exceeding twenty-five hundred (2,500). square feet for high -piled combustible storage in racks, a floor plan showing the dimensions and location of the rack system shall be submitted with the application for such permits.. (k) Chapter 1, Section 105.7.16 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.7.16 Roof obstructions. A construction permit is required for installation of a roof photovoltaic system when constructed on a building's roof that covers more than 50% or 10,000 square feet of the total surface area whichever is less. Exceptions: 1. Buildings that are four or more stories in height and protected with an approved automatic fire extinguishing system throughout. 2. Non -habitable structures including but not limited to shade structures, private carports, solar trellises, etc. (1) Section 105.8 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.8 Responsibility of permit tee. Fire permits shall be presumed to incorporate the provision that the applicant, the applicant's agent, employees or contractors shall carry out the proposed work 7 in accordance with the approved plans and with all requirements of . this code and any other laws or.regulations applicable thereto, whether specified or not. No approval shall relieve or exonerate any person from the responsibility of complying with the provisions and intent of this code. (m) Section 108.1 of the 2010 Edition of the California Fire Code.is hereby amended to read as follows: 108.1 Board of appeals established. The city council shall act as a board of appeals in making a correct determination of any appeal arising from actions of the fire code official. The fire code official shall be an ex.officio member of said board but shall not vote on any matter before the board. Appeals shall be made in writing and the appellant may appear in person before the city council or be represented by an attorney and may introduce evidence to support his claim. Appeals shall be heard at reasonable times at the convenience of the city council but not later than thirty days after the receipt thereof. (n) Section 113.6 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 113.6 Fees for services, establishment; review. The fire code official is authorized to collect fees for services established or modified by resolution of the City Council. The fire code official shall review fees charged for such services at least annually and shall, with approval of the City Administrator, recommend changes to the council when costs for such services make it appropriate. (o) ,Section 113.7 is hereby added to Chapter 1 of.the 2010 Edition of the California Fire Code to read as follows: 11 0 113.7 Operational permit fees. The fee set forth and established for the particular activity by a resolution of the City Council shall accompany all operational permits required pursuant to the provisions of this code. (p) Section 113.8 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 113.8 Construction permit fees. Construction permit fees shall be paid at the time of the permit issuance. In addition to the permit fee, the applicant shall pay a plan check fee. The fee set forth and established for the particular activity by a resolution of the City Council shall accompany all construction permits required pursuant to the provisions of this code. (q) Section 113.9 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 113.9 Re -inspection fee. Whenever an inspection is scheduled under Section 105.2.2 and the permittee is not ready for inspection and does not inform the fire code official or his representative at least two hours prior to.the scheduled inspection, a re -inspection fee may be assessed. (r) Section 114 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: SECTION 114 RESPONSIBILITY 114.1 Responsibility for costs. Persons who personally or through another willingly, negligently, or in violation of law set a fire, allow a fire to be set, allow a fire kindled or attended by them to escape from their control, allow any hazardous material to escape from their control, neglect to properly comply with any Q written notice of the fire chief, or willfully or negligently allow the continuation of a violation of this code and amendments thereto are liable for the expenses of fighting the fire, for the expenses of any investigation, or for the expenses incurred during a hazardous materials incident.. Such expenses shall be a charge against that person. Such charge shall constitute a debt of such person, and is collectible by the City in the same manner as in the case of an obligation under a contract, expressed or implied and a lien may be attached to the involved property. 114.2 Reporting injuries caused by fires. Any person, firm, corporation, or agency that maintains a hospital, pharmacy, or any other medical or first aid service shall immediately report to the fire chief any person suffering from any fire -related injury. The report shall be made both by telephone and in writing, and shall include the name and address of the injured person, the person's whereabouts, and the character and extent of the person's injuries. (s) Chapter 2, The definitions of "awning," "false alarm," "fire chief," "fire code official," "fire safety officer," and "safety container" are hereby added to Section 202 of Chapter 2 of the 2010 Edition of the California Fire Code in alphabetical order to read as follows: AWNING. An architectural projection that provides weather protection, identity, or decoration and -is wholly supported by the building to which it is attached. An awning is compromised of a lightweight frame structure over which a covering is attached. FALSE ALARM. The willful and knowing initiation or transmission of a signal, message or other notification of an event of fire when 10 no such danger exists, or the activation of any fire alarm system due to malfunction, mechanical or electrical defect, improper operation or procedure by any person, or a false oral or written report to any department of the City of Vernon that an emergency exists requiring immediate or emergency response by the Vernon Fire Department. FIRE CHIEF. The chief officer of the fire department serving the jurisdiction FIRE CODE OFFICIAL. The fire chief or other member of the fire service appointed by the fire chief charged with the administration and enforcement of this code. FIRE SAFETY OFFICER. A sworn member of the fire department serving the jurisdiction assigned to preserve life and property at a location, due to the hazardous nature of the activity of an event, production, operation, or function. SAFETY CONTAINER. An approved container of not over 5 gallons capacity, having a self -closing lid and spout cover. (t) Section 304.1.1.1 of the 2010 Edition of the California Fire Code is hereby added to read as follows: 304.1.1.1 Waste material near photovoltaic array system. Accumulation of waste material shall not be permitted underneath nor within 10 feet from a mounted photovoltaic array system. (u) Section 311.2.2 Exceptions 1 and 2, of the 2010 Edition of the California Fire Code is hereby deleted. (v) Section 312.2 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 312.2 Guard posts. Guard posts shall comply with all of the following requirements: 11 I.Constructed of steel not less than 8 inches (204 mm) in diameter and concrete filled. 2'. Spaced no more than 4 feet (1219 mm) between posts on center. 3. Set not less than 4 feet (1219 mm) deep in a concrete footing of not less than an 18 inch (457.2 mm) diameter. 4. Set with the top of the posts not less than 4 feet (1219 mm) above ground. 5. Located not less than 3 feet (914 mm) from the protected object. 6. Posts shall be painted safety yellow (w) Section 315.3.3 is hereby added to Chapter 3:of the 2010 Edition of the California Fire Code to read as follows: 315.3.3 Pallet storage height and total accumulation for storage. Pallet storage in the open shall not exceed 15 feet (4,572 mm) in height and a total aggregate content not exceeding 6,750 cubic feet. Aisle separation of 15 feet (4,572 mm) is required before the next pile or stack is created. Storage of pallets in excess of 240 pallets requires a permit per Sec. 105.6.25. (x) Section 315.3.4 is hereby added to Chapter 3 of the 2010 Edition of the California Fire Code to read as follows: 315.3.4 Pallets. All pallets must be stacked so that there is visibility through the stacks to the adjacent aisles, or so organized to assure that no temporary living facilities or places of refuge are hidden from view. Pallets shall be stacked or piled with due regard to the stability of piles, and in no case higher than 15 feet (4,572 mm). 12 (y) Chapter 3, Section 315.3.4.1'is hereby added to Chapter 3 of the 2010 Edition of the California Fire.Code to read as follows : 315.3.4.1 Clearance around pallets. Aisles between and around open pallet stacks shall be at least 15 feet (4,572 mm) in width and maintained free from accumulated rubbish, equipment, or other articles or materials. (z) Section 315.3.4.2 is hereby added to Chapter 3 of the 2010 Edition of the California Fire Code to read as follows: 315.3.4.2 Pallet storage next to structure/awning. When pallets are stored near a structure/awning, the height of the storage shall be restricted to no higher than the structure/awning and cannot exceed the height of the structure/awning, or 15 feet (4,572 mm), whichever is less. (aa) Section 503.2.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 503.2.1. Dimensions. Fire apparatus access roads shall have an unobstructed width of not less than 27 feet (8,229 mm) and an unobstructed vertical clearance of not less than 15 feet (4,572 mm). (bb) Section 504.4 is hereby added to Chapter 5 of the 2010 Edition of the California Fire Code is hereby added to read as follows: 504.4. Roof top access and safety. Roof top solar photovoltaic systems shall be in accordance with Appendix K. (cc) Section 507.5 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 13 507.5. Fire Hydrant Systems.When any portion of the facility or building protected is in excess of 150 feet from a water supply on a public street, as measured by an approved route around the exterior of the facility or building, on -site fire hydrants and mains capable of supplying the required fire flow shall be provided when required by the chief. (dd) Section 507.5.5 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: Sec. 507.5.5. Clear space around hydrants. Clear space of 31 feet (9,448.8 mm) in front of, 4 feet (1,219 mm) in rear of and 10 feet (3,048 mm) on both sides shall be maintained around each onsite hydrant. (ee) Section 901.4.5 is hereby added to Chapter 9 of the 2010 Edition of the California Fire Code to read as follows: 961.4.5 Protection of fire protection systems and equipment. Fire protection systems and equipment subject to possible vehicular damage shall be adequately protected with guard posts in accordance with Section 312 Vehicle Impact Protection, and modifications adopted under this code. (ff) Section 1504.2 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 1504.2 Location of spray -finishing operations. All inside or outside spray -finishing operations shall be conducted in an approved spray booth constructed in accordance with Section 1504. (gg) Section 3301.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 14 3301.1. Prohibited and limited acts. Explosive materials shall not be manufactured, tested or stored within the limits of the City of Vernon. (hh) Section 3404.2.9.6.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 3404.2.9.6.1. Locations where above -ground tanks are prohibited. Storage of Class I and Class II liquids in above ground tanks outside of buildings within the City of Vernon and in areas 1,000 feet (304,800 mm) or more from the outside boundary of a kindergarten through 12th grade public school shall be in approved containers not exceeding 10,000 gallons in size. In areas of a lot or parcel within 1,000 feet (304,800 mm) of the outside boundary of said school, the only Class I or Class II liquids approved for storage in aboveground tanks is diesel fuel which shall be in approved containers and shall be limited to either two (2) 1,000 gallon tanks or one (1) 2,000 gallon tank. (ii) Section 3801.4 is hereby added to Chapter 38 of the 2010 Edition of the California Fire Code to read as follows: 3801.4 Inside storage or use. No LP -gases of any type or mixture shall be permitted in any occupancy either for sale, use or storage without approval of the fire code official. (jj) Section 3803.2.2.1 is hereby added to Chapter 38 of the 2010 Edition of the California Fire Code to read as follows: Sec. 3801.2.2.1 Portable cylinders on motorized equipment. The use of portable cylinders of LP -gas as motorized equipment fuel in occupancies is limited as follows: LP -gas fuel.tanks on motorized equipment are limited to two per vehicle with a combined capacity not to exceed 50 pounds. Refilling of tanks shall not be permitted 15 within the occupancy and shall be permitted only in approved locations determined by the fire code official. (kk) Section 3804.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 3804.1. Storage of liquefied petroleum gases. Storage and transportation of LP -gas and the installation and maintenance of pertinent equipment shall be in accordance with NFPA 58 and shall be subject to the approval of the fire code official. Storage is permitted within the limits of the City of Vernon except within 1,000 (304,800 mm) feet of a kindergarten through 12th grade public school. Exception: Storage of LP -gas not exceeding 2,000 gallons per parcel in approved containers is permitted in all areas within the limits of the City of Vernon. (11) Section 3804.3.2 is hereby added to Chapter 38 of the 2010 Edition of the California Fire Code to read as follows: 3804.3.2 Tank orientation. Unless special protection is provided and approved by the fire code official, containers of LP -gas shall be oriented so that their longitudinal axes do not point toward other LP -gas containers, vital process equipment, control rooms, loading stations, flammable liquid storage tanks or required fire access roads. (mm) Appendix C of the 2010 Edition of the California Fire Code is hereby deleted. (nn) Section D103.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: D103.1. Access road. The dimension of the fire access road turnarounds shall be in accordance with City standards. (oo) Appendix K is hereby added to the 2010 Edition of the California Fire Code to read.as follows: APPENDIX K ROOF SOLAR PHOTOVOLTAIC SYSTEMS SECTION K101 SCOPE K101.1 Scope. This appendix shall apply to the design, construction, and installation of all solar photovoltaic systems when located on the roof of a building. Exception: 1. Buildings that are four or more stories in height and protected with an approved automatic fire extinguishing system throughout. 2.Non-habitable structures include, but are not limited to, shade structures, private carports, solar trellises, etc. K101.2 Permits. The fire code official shall review and approve the installation of roof solar photovoltaic systems on buildings that obstruct more than 50% or 10,000 square feet of the total roof surface area prior to the building code official issuing a permit for the installation for such roof obstructions. See section 105.7 for required construction permits. 17 K101.3 Required construction document information. All roof top installations submitted for approval shall include the following: 1.Site plan to scale depicting the following: a. Dimensions of the building b. Location of all structures on site. c. Street address of building. d. Access from street to building. e. Location of roof top solar arrays, gardens, or landscaped areas. f. Location of disconnects. g. Location of signage. h. Location of required access paths. i. Northern reference 2. Roof and Elevation plan showing the following: a. Array or landscape placement. b. Roof ridge lines. c. Eave lines. d. Equipment on roof. e. Vents, skylights, roof hatches, etc. 3. Location and wording of all markings, labels, and warning signs. 4.Building photographs that may be useful in the evaluation of the garden, landscaping, or array placement. M. SECTION K102 DEFINITIONS K102.1 Definitions. For the purpose of this appendix, certain terms are defined as follows: ACCESS PATHWAY. A required walking pathway that is designed to provide emergency access to firefighters. ARRAY. An uninterrupted section of solar photovoltaic panels or modules or a group of interconnected sub -arrays. GRID. The electrical.system that is on the service side of the electric meter. Designation of ridge, hip, and valley does not apply to roofs with 2-in-12 or less pitch. All roof dimensions are measured to centerlines. INVERTER. A device used to convert direct current (DC) electricity from the solar system to alternating current (AC) electricity for use in the building's electrical system or the grid. ROOF ACCESS POINT. An area that does not require ladders to be placed over building openings (i.e., windows, vents, or doors), and that are located at structurally strong points of building construction and in locations where ladders will not be obstructed by tree limbs, wires, signs or other overhead obstructions. SOLAR PHOTOVOLTAIC SYSTEM. A system of component parts that receives sunlight and converts it into electricity. SUB -ARRAY. Uninterrupted sections of solar photovoltaic panels interconnected into an array. TRAVEL DISTANCE. The walking distance between two points. VENTING CUT OUT. Section(s) in an array that are designed to accommodate emergency ventilating procedures. 19 SECTION K103 ROOF SOLAR PHOTOVOLTAIC SYSTEMS K103.1. Solar photovoltaic systems. The requirements of section K103 applies to all solar photovoltaic systems installed on the roof of buildings regardless of system size or if used for residential and commercial purposes. Roof solar photovoltaic systems shall be designed, constructed and installed in accordance with sections K103.2 through K103.5.3. K10.3.2 Marking. Photovoltaic systems shall be marked. Marking is needed to provide emergency responders with appropriate warning and guidance with respect to isolating the solar electric system. This can facilitate identifying energized electrical lines that connect the solar panels 'to the inverter, as these should not be cut when venting for smoke removal. Materials used for marking shall be weather resistant. UL 969 shall be used as a standard for weather rating (UL listing of markings is not required). K103.2.1 Building's electrical system main service disconnect marking. The buildings main electrical service disconnect shall be marked. K103.2.1.1 Single and two dwelling unit residential buildings. The marking shall be placed within the main service disconnect. Exception: If the main service disconnect is operable with the service panel closed, then the marking shall be placed on the outside cover. 0 K103.2.1.2 Commercial and industrial buildings. The marking shall be placed adjacent to the main service disconnect in a location clearly visible from the location where the lever is operated. K103.2.1.3 Marking content and format. Marking content and format shall be as follows. 1. Marking content: "CAUTION: SOLAR ELECTRIC SYSTEM CONNECTED" 2. Red background 3. White lettering 4. Minimum 3/8 letter height 5. All capital letters 6. Arial or similar font, non -bold 7. Reflective weather resistant material suitable for the environment (durable adhesive materials must meet this requirement) K103.2.2 Photovoltaic circuits marking. Photovoltaic circuit marking is required on all interior and exterior photovoltaic DC circuit conduit, raceways, enclosures, cable assemblies and junction boxes to alert firefighters to avoid cutting them. Marking shall be placed every 10 feet (3,048 mm), at turns, and above and/or below penetrations, and at all photovoltaic circuit combiner and junction boxes. K103.2.2.1 Marking content and format. Marking content and format shall be as follows. 1. Marking content: "CAUTION: SOLAR CIRCUIT" 2. Red background 3. White lettering 4. Minimum 3/8" letter height 21 5. All capital letters 6. Arial or similar font, non -bold 7. Reflective weather resistant material suitable for the environment (durable adhesive materials must meet this requirement) K103.2.3 Inverter marking. No markings are required for the inverter unless the inerter is used also as a required remote electrical disconnect. K103.2.4 Remote electrical disconnect marking. Marking shall be located immediately next to the remote electrical disconnect control as follows: 1. Marking content: "CAUTION: SOLAR CIRCUIT DISCONNECT" 2. Red background 3. White lettering 4. Minimum 3/8" letter height 5. All capital letters 6. Arial or similar font, non -bold 7. Reflective weather resistant material suitable for the environment (durable adhesive materials must meet this requirement) K103.3 Remote electrical disconnect. Photovoltaic circuits shall be equipped with a means for remote electrical disconnect located downstream from the photovoltaic array at the point where the photovoltaic circuit first enters the structure, or at another approved location. The manual control to operate the remote electrical disconnect shall be located within five feet of the building's main 22 electrical panel. The remote electrical disconnect shall be listed and meet the requirements of the California Electrical Code. Exceptions: 1. Photovoltaic circuits contained in rigid or electrical metallic tubing running between the array combiner box and the main electrical panel which are entirely exterior to the building need not'be equipped with a means of remote electrical disconnect other than the disconnects intrinsic to the system. 2. Photovoltaic circuits contained in rigid or electrical metallic tubing running between the array combiner box and the main electrical panel that run through the interior of the building when installed a minimum of 18" below the roof assembly when measured parallel to the surface of the roof. 3. The photovoltaic system inverter may be used for remote electrical disconnect when the inverter is located immediately upstream of the roof penetration where the circuit enters the structure. K103.4 Access pathways and emergency ventilation. Access and spacing requirements shall be -provided in order to ensure firefighter access to the roof, provide access pathways to specific areas of the roof, provide for venting cut out areas, and to provide emergency egress from the roof. For the purpose of access pathways and emergency ventilation, designation of ridge, hip, and valley does not apply to roofs with 2- in-12 or less pitch. All roof dimensions are measured to centerlines. K103.4.1 Alternative materials and methods. Alternative materials and methods per Section 104.9 for access pathways or venting cut outs may be requested for approval by the fire code official due to: 23 1. Unique site specific limitations 2. Alternative access opportunities (as from adjoining roofs). 3. Ground level access to the roof area in question 4. Other adequate venting cut out opportunities when approved by the fire code official. 5. Adequate venting cut out areas afforded by panel set back from other roof top equipment (for example: shading or structural constraints may leave significant areas open for ventilation near HVAC equipment.) 6. Automatic ventilation device. 7. New technology, methods, or other innovations that ensure adequate fire department access pathways and ventilation opportunities. K103.4.2 Single and two dwelling unit residential buildings access pathways and venting cut outs. Access pathways and venting cut outs for single and two dwelling unit residential buildings shall be provided as. per Section K103.4.2.1 through K103.4.2.4. K103.4.2.1 Hip roof layout. Solar modules shall be located in a manner that provides one three (31) foot wide clear access pathway from the eave to the ridge on each roof slope where solar modules are located. The access pathway shall be located at a structurally strong location on the building, such as a bearing wall. K103.4.2.2 Single roof ridge. Solar modules shall be located in a manner that provides two three (31) foot wide access pathways from the eave to the ridge on each roof slope where solar modules are located. 24 K103.4.2.3 Roof hips and valleys..Solar modules shall be located no closer than one and one half (1.51) feet to a hip or a valley if modules are to be placed on both sides of a hip or valley. If the solar modules are to be located on only one.side of a hip or valley, that is of equal length then the panels may be placed directly adjacent to the hip or valley. K103.4.2.4 Venting cut out areas. Solar modules shall be located no higher than three (31) feet below the ridge. K103.4.3 Commercial and industrial buildings and multi -residential buildings containing three or more dwelling units required access pathways and venting cut outs. Access pathways and venting cut outs for commercial and industrial buildings and multi -residential buildings containing three or more dwelling unit s shall be provided as accordance with Section K103.4.3.1 through K103.4.3.2.6. Exception: If the fire code official determines that the roof configuration is similar to that found in single and two dwelling unit residential buildings, the design requirements found in Section K103.4.2 may be utilized. K103.4.3.1 Array dimension. Arrays shall be no greater than 150 feet (45,720 mm) by 150 feet (45,720 mm) in distance in either axis. K103.4.3.2 Access pathways. Access pathways shall be established in the design of the photovoltaic system installation. Access pathways shall be provided in accordance with.Section K103.4.3.2.1 through K103.4.3.2.5. 25 K103.4.3.2.1 Access pathways perimeter of the roof. There shall be a minimum six (61) foot (1,828-mm) wide clear perimeter around the edges of the roof. Exception: If either axis of the building is 250 feet (976,200 mm) or less, there shall be.a minimum four (41) feet (1,219 mm) wide clear perimeter around the edges of the roof. K103.4.3.2.2 Access pathway location. The center line axis of access pathways shall run on structural members or over the next closest structural member nearest to the center lines of the roof. K103.4.3.2.3 Access pathway center line. The center line axis of access pathways shall be provided in both axis of the roof. K103.4.3.2.4 Access pathway alignment. -Access pathways shall be in a straight line and provide not less than four (41) feet (1,219 mm) clear to skylights, ventilation hatches or roof standpipes. K103.4.3.2.5 Access pathway around roof access hatches. Access pathways shall provide not less than four (41) feet (1,219 mm) of clearance around roof access hatch with at least one not less than four (41) feet (1,219 mm) clear pathway to parapet or roof edge. K103.4.3.2.6 Venting cut out areas. Venting cut outs between array sections,shall be either: 1. An access pathway eight (81) feet (2,438 mm) or greater in width. 2. An access pathway that is four (41) feet (1,219 mm) or greater in width and bordering on existing roof skylights or ventilation hatches. 26 3.An access pathway that is four (41) feet (1,219 mm) or greater in width and bordering four (41) feet (1,219 mm) by eight (81) feet (2,438 mm) venting cut outs every twenty (201) feet (6,096 mm) on alternating sides of the access pathway. K103.5 Location of conductors. Conduit, wiring systems and wiring raceways for photovoltaic circuits shall be provided in accordance with Section K103.5.1 through K103.5.3. K103.5.1 Conductor location. Conduit, wiring systems, and wiring raceways shall be located as close as possible to the ridge or hip or valley and from the hip or valley as directly as possible to an outside wall to reduce trip hazards and maximize venting cut out areas. K103.5.2 Conductors between sub arrays and DC combiner boxes. Conduit runs between sub arrays and to DC combiner boxes shall use the design that minimizes the total amount of conduit on the roof by taking the shortest path from the array to the DC combiner box. The DC combiner boxes are to be located such that conduit runs are minimized in the pathways between arrays. K103.5.3 Conduit within enclosed spaces. To limit the hazard of cutting live conduit in venting operations, DC wiring shall be run in metallic conduit or raceways when located within enclosed spaces in a building and shall be run, to the maximum extent possible, along the bottom of load -bearing members. 27 SECTION 4: Ordinances Repealed. Any ordinance, part of an ordinance, or code section in conflict with this Ordinance is hereby repealed. SECTION 5: Severability. If any section, subsection, sentence, clause, or phrase or word of this ordinance is for any reason held to be void or unconstitutional, such decision shall not affect the.validity of the remaining portions of this ordinance;. it being the intention of the City Council of the City of Vernon to adopt and pass this ordinance and each section, subsection, sentence, clause or phrase thereof irrespective of the fact that one or more of the sections, subsections, clauses, sentences or phrases thereof may be declared void or unconstitutional. SECTION 6: Copies on File with City Clerk. Pursuant to Government Code Section 50022.6, one certified copy the 2010 California Fire Code shall be made available for public inspection in the office of the City Clerk. SECTION 7: Effective Date. This ordinance shall be in full force and effect on January 1, 2011. APPROVED AND ADOPTED this 6th day of December, 2010. Name: Hilario Gonzales Title: Mayorer-i�i ATT ST: WILDARD G:'. GUCq, City Clerk STATE OF CALIFORNIA ) ss COUNTY OF LOS ANGELES ) I, WILLARD G. YAMAGUCHI, City Clerk of the City of Vernon, do hereby certify that the foregoing Ordinance, being Ordinance No. 1177, was duly and regularly introduced at a meeting of the City Council of the City of Vernon, held in the City of Vernon -on Monday, November 1, 2010, and thereafter adopted at a meeting of said City Council held on Monday, December 6, 2010, by the following vote: AYES: Councilmembers: Mayor Gonzales, McCormick, Davis, Maisano, Newmire NOES: Councilmembers: None ABSENT: Councilmembers: None And thereafter was duly signed by the Mayor or Mayor Pro-Tem of the City of Vernon. Executed this day of December, 2010, at Vernon, California. 4IL4LAD G. HI City Clerk (SEAL) - 29 - CITY CLERK'S OFFICE INTEROFFICE MEMORANDUM DATE:; December 13, 2010 TO: Jed Hulsey, Fire Marshal FROM-:. Willard Yamaguchi, City Clerk RE Ordinance No. 1177 - An Ordinance of the City Council of the. City of Vernon Amending Chapter 7, Fire Regulation, of the Code of the City of Vernon; Adopting by Reference the 2010 California Fire Code Including Amendments, Additions and Deletions, and Repealing All ordinances and Parts of Ordinances in Conflict Therewith Transmitted herewith for your transmittal to the State is a certified copy of Ordinance No. 1177 referenced above, which was approved by City Council on December 6, 2010. Please see that a copy of the transmittal letter is sent to the City Clerk's office for the file. Thank you. WY:dj c: Mark Whitworth Ordinance No. 1177 Resolution No. 2010-176 STATE OF CALIFORNIA ) ss COUNTY OF LOS ANGELES) CERTIFICATE I, Willard Yamaguchi, City Clerk of the City of Vernon, County of Los Angeles, State of California, hereby certify that the attached is a full and complete copy of: ORDINANCE NO. 1177 - An Ordinance of the City Council of the City of Vernon Amending Chapter 7, Fire Regulation, of the Code of the City of Vernon; Adopting by Reference the 2010 California Fire Code Including Amendments, Additions and Deletions, and Repealing All Ordinances and Parts of Ordinances in Conflict Therewith IN WITNESS WHEREOF, I have hereunto set my hand and affixed the official Seal of the City of Vernon, County of Los Angeles, State of California, on this 13 day of December 2010. SEAL: Willard Y m g chi City Cle k NOTICE OF PUBLIC HEARING The City of Vernon will conduct a Public Hearing which you may attend. PLACE: Vernon City Hall City Council Chambers 4305 Santa Fe Avenue Vernon, CA 90058 DATE AND TIME: December 6"' 2010, at 9:00 a.m. or as soon thereafter as the matter may be heard PURPOSE: To consider adoption of Ordinance No. 1177 entitled "AN ORDINANCE OF THE CITY COUNCIL OF THE CITY OF VERNON AMENDING CHAPTER 7, FIRE REGULATION OF THE CODE OF THE CITY OF VERNON; ADOPTING BY REFERENCE THE 2010 CALIFORNIA FIRE CODE, INCLUDING APPENDICES; AND REPEALING ALL ORDINANCES AND PARTS OF ORDINANCES IN CONFLICT THEREWITH." Any interested person may attend and make an oral presentation to the City Council at the time of the hearing, or may present written comments prior to the hearing. If you challenge the adoption of the 2010 California Fire Code with certain amendments or any provisions thereof in court, you may be limited to raising only those issues you or someone else raised at the hearing described in this notice or in written correspondence delivered to the City of Vernon, at or prior to the meeting. Information may be obtained by contacting the office of the City Clerk at the above address, or on the City of Vernon's website located at www.cityofvemon.org under the Public Hearings link. The hearing may be continued or adjourned to a stated time and place without further notice of a public hearing. Dated: November 2, 2010 ILLA D A HI, City Clerk °F V� RECEIVED OCT 2 7 ZQ� 0 s�VFLY II��J CITY CLERK'S OFFICE STAFF REPORT FIRE DEPARTMENT DATE: November 1, 2610 TO: Honorable Mayor and City Council (? FROM: Jed Hulsey, Fire Marshal RE: FIRE CODE ADOPTION The State of California recently adopted the 2010 California Fire Code (CFC). Section 17958 of the California Health and Safety Code requires that the latest edition of the California Building Standards Codes apply to local construction 180 days after they become effective at the State level. Therefore, this code is scheduled to become effective on January 1, 2011. California Health and Safety Code Sections 17958, 17958.5, 17958.7 and 18941.5 allow a local agency to modify or change the Building Standards Codes provided that such modifications or changes are reasonably necessary because of local climatic, geological, or topographical conditions. Fire Department staff believes it is in the interest of public health, safety and welfare that certain amendments to the CFC be adopted because of the climatic, geological and topographical conditions in the City of Vernon. Specifically: 1. On the basis of a local climatic condition; the seasonal climatic conditions during the late summer and fall create severe fire hazards to the public health and welfare in the City of Vernon. The hot, dry weather in combination with Santa Ana winds results in extreme fire conditions for the community. The aforementioned conditions combined with the geological characteristics of the county and near the City create hazardous conditions for which departure from the California Building Standards Code is required. 2. On the basis of local geological condition; the City of Vernon is subject to earthquake hazards caused by its location in an active seismic activity area. Faults which 1 potentially cause seismic activity in the City include the Whittier Fault to the east, the Raymond Fault to the north, and the Newport -Inglewood Fault to the west. Said faults are generally considered major Southern California earthquake faults which may experience rupture at any time. Thus, because the City is within seismic area which includes earthquake faults within the County of Los Angeles and near the City, the modifications and changes cited herein are designed to better limit property damage as a result of seismic activity and to establish criteria for repair of damaged property following a local emergency. 3. On the basis of local topographical condition; the of the City of Vernon is coupled with the density of buildings, limited setbacks, narrow access to buildings, narrow streets potentially create a problem for governmental agencies to respond to emergency conditions. Additionally, long periods of dry, hot weather, combined with unpredictable seasonal winds (Santa Ana wind conditions) result in increased exposure to fire risk. The heavy rains tend to over -saturate the soil for a short time period during the year, having a detrimental effect on in - ground structures affected by varying moisture conditions. 2010 Vernon Fire Code The California Fire Code regulates minimum fire safety requirements for new and existing buildings, facilities, storage and processes. The Fire Code addresses fire prevention, fire protection, life safety, and safe storage and use of hazardous materials in new and existing buildings, facilities, storage and processes. It is recommended that the 2010 California Fire Code, including the appendices and standards contained therein, published by the International Code Council and the California Building Standards Commission and attached as Exhibit "A," be adopted as the Fire Code of the City of Vernon with the proposed amendments outlined herein. The proposed amendments for the Fire Code are summarized as follows: 1. General authority and responsibilities 2. Permits 3. Fee schedule 4. Responsibility 5. Definitions 6. Outside storage 7. Vehicle impact protection 2 8. Fire apparatus access roads 9. Fire protection water supplies 10. Fire protection systems 11. Spray finishing 12. Explosives 13. Storage (flammable and combustible liquids) 14. Liquefied petroleum (LP) gas 15. Roof solar photovoltaic systems Amendments Every three years, the State of California adopts new model codes to establish uniform standards for the construction and maintenance of buildings, plumbing systems, mechanical systems, electrical systems, and fire and life safety systems. Local jurisdictions are mandated to adopt such state codes. Prior to adoption, amendments to the state codes may be incorporated by the local jurisdiction if they can be justified on the basis of local climatic, geological, and/or topographical condition which affects the jurisdiction. Attached herewith, as Attachment #1 are the proposed amendments to 2010 California Fire Code (Part 9 of Title 24 of the California Code of Regulations) that, with approval, will be adopted as the City of Vernon Fire Code. Attached herewith, as Attachment #2, are justifications of proposed amendments of the Code, and rationale explaining the reasoning of the modification. Fee Schedule Vernon Fire Department currently provides non -emergency safety and fire prevention associated services at no charge to the businesses and occupants within the City of Vernon. Fire Staff has reviewed costs for fire prevention associated services and has determined that without a structured fee schedule, these services cannot be properly supported due to lack of funding to sustain staffing costs performing these duties. Some of the fees being considered, currently exist within other City department fee schedules. Having a fee schedule assigned to the Fire Department will assist in supporting the performance of plan review, construction and operational permit inspections, occupancy inspections, public education programs, and other associated safety and fire prevention activities. 3 Some examples of services currently being provided are: Inspection Current Fee Proposed Fee Inspection outside of normal business hours none $ /hr Initial inspection (fee waived if in compliance) none $ /hr Re -inspection fee (after 2nd re -inspection) none $ /hr Public Education Training Current Fee Proposed Fee Portable Fire Extinguisher (2hrs.) - 16 students p/ group none $ per group Safety & Emergency Preparation (2hrs.) none $ per group Evacuation Exercise (Ihr.) w/ fire apparatus & crew none $ per event A draft of the Fire Department fee schedule is affixed as Attachment #3 of this report. 4 ATTACHMENT #1 Amendments to Part 9 of Title 24 of the California Code of Regulations 2010 California Fire Code 5 SUMMARY OF RECOMMENDED AMENDMENTS TO PART 9 OF TITLE 24 OF THE CALIFORNIA CODE OF REGULATIONS — 2010 CALIFORNIA FIRE CODE (a) Section 104.7.2 of the 2010 Edition of the California Fire Code is hereby amended to add the following sentence to the end of the paragraph to read as follows: 104.7.2 Technical assistance. When there is a fire, explosion, hazardous materials incident, or other potential life or serious property threatening situation, the fire code official can request the owner, occupant, or operator to hire a private fire protection or hazardous materials investigator, acceptable to the fire code official and at the expense of the owner or operator, to provide a full report of the incident, including, without limitation, such matters as origin, cause, circumstances or proposed solutions to the problem. Rationale: This amendment provides investigation assistance when the fire code official requires reinforcement and validation of origin, cause, and circumstances of an emergency event or explanations to the threat or risk of an identified problem. Justification: Administrative — (see justification A listed in Attachment 42) (b) Section 104.12 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 104.12 False alarms. The fire code official is authorized to assess a service charge, as set forth by resolution, against the person owning or responsible for an alarm system when a fire department response occurs as a result of the third false alarm at the same address or location within any twelve month period, and for each subsequent false alarm thereafter, or against any person who intentionally, or in violation of the law reports, or causes to be reported, a false alarm to any department of the City of Vernon that an emergency exists requiring immediate or emergency response by the City of Vernon Fire Department. Rationale: Fire apparatus and personnel respond to numerous false alarm responses due to owner/occupants not maintaining their fire alarm and/or fire protection systems. The time taken N. to respond to these non -emergency incidents can limit the ability of emergency responders to be available for response to legitimate emergencies and calls for assistance. The City should have the ability to collect for this additional work with the rationale that the owner or responsible party will maintain their fire alarm and/or fire protection systems if a penalty is incurred for the false alarm. Justification: Administrative — (see justification A listed in Attachment 2) (c) Section 104.13 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 104.13 Vehicle/trailer creating hazard. Whenever it is determined by a fire code official or his representative that an unattended or attended vehicle/trailer parked or stopped upon any public street, road, alley, right-of-way, or upon private property, creates an immediate danger or fire hazard to itself, other vehicles, persons, or surrounding property, the fire official shall request the local law enforcement agency to cause the removal of the vehicle/trailer to a safe location, and the local law enforcement agency shall cause the removal at the expense of the registered owner of the vehicle/trailer, and a notice of the removal shall be given to the registered owner as soon as feasible. Rationale: At times, vehicles are left positioned on thoroughfare locations that restrict and block access to emergency vehicles. This act can impede the ability of emergency responders to arrive, investigate, and function at the scene of the incident on a timely basis, potentially causing more harm, damage, and property loss. Operators have the responsibility to position their vehicles in locations that will not hamper emergency responders from doing they're job. Justification: Administrative, Climatic, Geologic, & Topographic — (see just fication A, B C & D listed in Attachment 2) (d) Section 104.14 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 104.14 Outside obstructions. No person shall park or place any material or vehicle in any. established exit way, driveway, gateway, or alleyway between buildings that would hamper the ingress of fire equipment in case of a fire, explosion, hazardous materials incident, or other 7 potential life or serious property threatening situation. When in the opinion of the fire code official or his representative, any driveway, gateway, or alleyway between buildings is so obstructed by objects, materials, or vehicles as to impede the ingress or egress of said way, it shall be removed immediately upon order of the fire code official or his representative. When such obstruction is a vehicle, it may be removed.or impounded at the owner's expense and as prescribed by law. Rationale: At times, stock, product, materials, and vehicles are left at sites that restrict and block access to. emergency vehicles or obstruct ingress/egress to emergency personnel. This act can impede the ability of emergency responders to safety and quickly function at the scene of the incident, potentially causing more harm, damage, and property loss. Owners, occupants, and operators have the responsibility to position their product, materials, and vehicles in locations that will not hamper emergency responders from doing they're job. Justification: Climatic, Geologic, & Topographic (seeJustification B, C & D listed in Attachment 2) (e) Section 104.15 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 104.15 Fire safety officer. When in the opinion of the fire chief, it is necessary for the preservation of life and property, due to the hazardous nature of an event, production, operation, or function, the fire chief shall require the owner, agent, production company, or lessee to employ or cause the employment of one or more fire department safety officers to be on duty at such place during such activity. Rationale: Occasionally scheduled activities endorsed by property owners, their agents, and production companies occur at locations and facilities in the City that require guidance and service in the preservation of life and property. Approving fire safety personnel, trained to recognize and eliminate unsafe acts, preventfires, and other hazardous actions will save life and property in the City. Justification: Administrative — (see justification A listed in Attachment 2) (f) Section 105.1.4 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.1.4 Investigation fees; work without a permit. Whenever any work, operation or action for which a permit is required by this code has been commenced without first obtaining said permit, an investigation shall be made before a permit may be issued for such work. An investigation fee, in addition to the permit fee, shall be collected whether or not a.permit is then subsequently issued. The investigation fee shall be double the amount of the permit fee set forth in the fee schedule. The payment of such investigation fee shall not exempt any person from compliance with all other provisions of this code, nor from any, penalty prescribed by law. Rationale: The City Council shall set forth the permit and plan review fees by resolution in order to ensure sufficient funds are collected for services provided. From time to time occupants construct and/or modify the structure, building, facility or operation without providing plans or obtaining a permit for the changes. The City should have the ability to collect for this investigational work. Justification: Administrative — (see justification A listed in Attachment 2) (g) Section 105.1.1 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.1.1 Permits required. Permits required by this code shall be obtained from the fire code official. Issued permits shall be conspicuously displayed on the premises designated therein at all times and shall be readily available. for inspection by code officials. Permit fees shall be asset forth in a fee schedule adopted by resolution by the City Council. Rationale: Certain activities historically have been hazardous at work locations. Operational permits annually regulate these activities to reduce or eliminate the risks, whereas construction permits direct the building or installation of specific operational systems or functions. Permits must be posted conspicuously, either permanently or for a limited time, for view by inspectors. Justification: Administrative — (see justification A listed in Attachment 2) a (h) Section 105.6.25 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 105.6.25 Lumber yards, woodworking plants, and pallet storage. A permit is required for storage or processing of lumber exceeding 100,000 board feet (8,333ft3) (236m), or outside pallet storage in excess of 240 units and inside storage in excess of 64 units. Rationale: Large amounts of loose wood products are afire hazard. Currently, this permit does not incorporate pallet storage. This addition will standardize storage practices at facilities that store substantial amounts ofpallets in the City. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) (i) Section 105.6.48 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.6.48 General use permit. In addition to the permits required by Section 105.6, a general use permit shall be obtained from the fire code official for any activity or operation not specifically addressed in this article, which in the judgment of the fire code official, is possible or likely to produce conditions hazardous to life or property. Rationale: Currently, some activities or operations occur at locations that increase the potential for loss of life or property. This permit addresses these activities and operations by regulating safer practices at facilities in the City. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) 0) Chapter 1, Section 105.7.15 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.7.15 High -piled storage. A construction permit is required for installation or modification of high -piled combustible storage in racks. When using any building or portion thereof exceeding 10 twenty-five hundred (2,500) square feet for high -piled combustible storage in racks, a floor plan showing the dimensions and location of the rack system shall be submitted with the application for such permits. Rationale: Currently, this permit is not listed in the CFC The addition of this construction permit will standardize the installation of high piled combustible storage in racks along with the requirement of providing a floor plan. The addition of this requirement will direct safer storage within buildings and facilities. Justification: Administrative, Climatic, Geologic, & Topographic (see justification A, B, C & D listed in Attachment 2) (k) Section 105.7.16 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.7.16 Roof obstructions. A construction permit is required for installation of a roof photovoltaic system when constructed on a building's roof that covers more than 50% or 10,000 square feet of the total surface area whichever is less. . Exceptions: 1. Buildings that are four or more stories in height and protected with an approved automatic fire extinguishing system throughout. 2. Non -habitable structures including but not limited to shade structures, private carports, solar trellises, etc. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) (1) Section 105.8 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 105.8 Responsibility of permittee. Fire permits shall be presumed to incorporate the provision that the applicant, the applicant's agent, employees or contractors shall carry out the proposed work in accordance with the approved plans and with all requirements of this code and any other laws or regulations applicable thereto, whether specified or not. No approval shall relieve or 11 exonerate any person from the responsibility of complying with the provisions and intent of this code. Rationale: The permittee and/or its agents shall be held responsible to ensure its work complies with the code and with other regulations or laws adopted by the State and this responsibility should not be shifted in any way to the City or its employees. Justification: Administrative — (see justification A listed in Attachment 2) (m) Section 108.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 108.1 Board of appeals established. The city council shall act as a board of appeals in making a correct determination of any appeal arising from actions of the fire code official. The fire code official shall be an ex officio member of said board but shall not vote on any matter before the board. Appeals shall be made in writing and the appellant may appear in person before the city council or be represented by an attorney and may introduce evidence to support his claim. Appeals shall be heard at reasonable times at the convenience of the city council but not later than thirty days after the receipt thereof. Rationale: The city council shall act as a board of appeals making a correct determination of any appeal of orders, decisions or determinations made by the fire code official relative to the application and interpretation of the California Fire Code. The fire code official shall be an ex. officio member of said board to assist in the interpretation of the code, but shall have not vote on any matter before the board. Justification: Administrative — (see justification A listed in Attachment 2) (n) Section 113.6 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 113.6 Fees for services, establishment; review. The fire code official is authorized to collect fees for services established or modified by resolution of the City Council. The fire code official shall review fees charged for such services at least annually and shall, with approval of the City 12 Administrator, recommend changes to the council when costs for such services make it appropriate. Rationale: This amendment provides the Fire Department with administrative provisions for the establishment and review of fees for services. Justification: Administrative — (see justification A listed in Attachment 2) (o) Section 113.7 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 113.7 Operational permit fees. The fee set forth and established for the particular activity by a resolution of the City Council shall accompany all operational permits required pursuant to the provisions of this code. Rationale: Certain business operations create additional potential hazards at the workplace. These hazards are regulated by the fire code, and may require a specialized inspection. The City Council shall set forth the permit fees by resolution in order to ensure sufficient funds are collected for services provided. The City should have the ability to collect for this additional work. Justification: Administrative — (see justification listed in Attachment 2) (p) Section 113.8 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 113.8 Construction permit fees. Construction permit fees shall be paid at the time of the permit issuance. In addition to the permit fee, the applicant shall pay a plan check fee. The fee set forth and established for the particular activity by a resolution of the City Council shall accompany all construction permits required pursuant to the provisions of this code. Rationale: The City Council shall set forth the permit and plan review fees by resolution in order to ensure sufficient funds are collected for services provided. From time to time permittees call for an inspection when the work has not been completed or is not performed in conformance with the plans causing the City to re -inspect the work. The City should have the ability to collect for this additional work. 13 Justification: Administrative — (see justification A listed in Attachment 2) (q) Section 113.9 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: 113.9 Re -inspection fee. Whenever an inspection is scheduled under Section 105.2.2 and the permittee is not ready for inspection and does not inform the fire code official or his delegate at least 2 hours prior to the scheduled inspection, a re -inspection fee may be assessed. Rationale: From time to time permittees call for an inspection when the work has not been completed or is not performed in conformance with the plans causing the City to re -inspect the work. The City should have the ability to collect for this additional work. Justification: Administrative — (see justification A listed in Attachment 2) (r) Section 114 is hereby added to Chapter 1 of the 2010 Edition of the California Fire Code to read as follows: SECTION 114 — RESPONSIBILITY 114.1 Responsibility for costs. Persons who personally or through another willingly, negligently, or in violation of law set a fire, allow a fire to be set, allow a fire kindled or attended by them to escape from their control, allow any hazardous material to escape from, their control, neglect to properly comply with any written notice of the fire chief, or willfully or negligently allow the continuation of a violation of this code and amendments thereto are liable for the expenses of fighting the fire, for the expenses of any investigation, or for the expenses incurred during a hazardous materials incident. Such expenses shall be a charge against that person. Such charge shall constitute a debt of such person, and is collectible by the City in the same manner as in the case of an obligation under a contract, expressed or implied and a lien may be attached to the involved property. 114.2 Reporting injuries caused by fires. Any person, firm, corporation, or agency that maintains a hospital, pharmacy, or any other medical or first aid service shall immediately report to the fire chief any person suffering from any fire -related injury. The report shall be made both 14 by telephone and in writing, and shall include the name and address of the injured person, the person's whereabouts, and the character and extent of the person's injuries. Rationale: The owner, occupant and/or its agents shall be held responsible to ensure that safety and preventative measures are provided for employees, visitors, and emergency responders by maintaining fire prevention within its buildings, facilities, storage and processes. If the owner or occupant does not comply with the established codes and regulations, fees and/or penalties can be imposed. The City should have theability to recover the costs of these expenses from the violator(s). Justification: Administrative, Climatic, Geologic, & Topographic (see justification A, B, C & D listed in Attachment 2) (s) The definitions of "awning," "false alarm," "fire chief," "fire code official," "fire safety officer," and "safety container" are hereby added to Section 202 of Chapter 2 of the 2010 Edition of the California Fire Code in alphabetical order to read as follows: AWNING. An architectural projection that provides weather protection, identity, or decoration and is wholly supported by the building to which it is attached. An awning is compromised of a lightweight frame structure over which a covering is attached. FALSE ALARM. The willful and knowing initiation or transmission of a signal, message or other notification of an event of fire when no such danger exists, or the activation of any fire alarm system due to malfunction, mechanical or electrical defect, improper operation or procedure by any person, or a false oral or written report to any department of the City of Vernon that an emergency exists requiring immediate or emergency response by the Vernon Fire Department. FIRE CHIEF. The chief officer of the fire department serving the jurisdiction. FIRE CODE OFFICIAL. The fire chief or other member of the fire service appointed by the fire chief charged with the administration and enforcement of this code. FIRE SAFETY OFFICER. A sworn member of the fire department serving the jurisdiction assigned to preserve life and property at a location, due to the hazardous nature of the activity of an event, production, operation, or function. is SAFETY CONTAINER An approved container of not over 5 gallons capacity, having a self - closing lid and spout cover. Rationale: Definitions for fire chief and fire code official are imprecise. These modifications are specific to Vernon Fire Department. The definitions for awning, false alarm, fire safety officer and safety container were not included in section 2 of the CFC and are referenced in the adoptions, so by including them, the terms are identified. Just cation: Administrative — (see justification A listed in Attachment 2) (t) Section 304.1. Ll of the 2010 Edition of the California Fire Code is hereby added to read as follows: 304.1.1.1 Waste material near photovoltaic array system. Accumulation of waste material shall not be permitted underneath nor within 10 feet from a mounted photovoltaic array system Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Administrative, Climatic, Geologic, & Topographic (see justification A, B, C & D listed in Attachment 2) (u) Section 311.2.2 Exceptions 1 and 2, of the 2010 Edition of the California Fire Code are hereby deleted. Rationale:. Vacantpremises that have fare protection systems installed must be required to maintain the systems to function in case of a fire. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) (v) Section 312.2 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 312.2 Guard posts. Guard posts shall comply with all of the following requirements: 16 1. Constructed of steel not less than 8 inches (204mm) in diameter and concrete filled. 2. Spaced no more than 4 feet (1219mm) between posts on center. , 3. Set not less than 4 feet (1219mm) deep in a concrete footing of not less than 18 inches (457.2 mm) in diameter. 4. Set with the top of the posts not less than 4 feet (1219mm) above ground. 5. Located not less than 3 feet (914 mm) from the protected object. 6. Posts shall be painted safety yellow Rationale: The City of Vernon is an industrial city, with large trucks, tractor -trailers, and heavy equipment moving on public and private roadways and property. Occasionally large vehicles strike protective guard posts bending, breaking and pushing them against fire protection equipment, hazardous materials containers, and other specialized appliances the posts are designed to protect. This code modification increases the requirements of the guard posts, thus providing better protection of the equipment. Justification: Administrative and Topographic (see justification A, and D listed in Attachment 2) (w) Section 315.3.3 is hereby added to Chapter 3 of the 2010 Edition of the California Fire Code to read as follows: 315.3.3 Pallet storage height and total accumulation for storage. Pallet storage in the open shall not exceed 15 feet (4,572 mm) in height and a total aggregate content not exceeding 6,750 cubic feet: Aisle separation of 15 feet (4,572 mm) is required before the next pile or stack is created. Storage of pallets in excess of 240 pallets requires a permit per Sec. 105.6.25. Rationale: Large amounts of loose wood products are afire hazard. This addition will standardize storage practices at facilities that store substantial amounts ofpallets in the City, and provide the fare department avenues to access the product piles if a fire occurs. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) (x) Section 315.3.4 is hereby added to Chapter 3 of the 2010 Edition of the California Fire Code to read as follows: 17 315.3.4 Pallets. All pallets must be stacked so that there is visibility through the stacks to the adjacent aisles, or so organized to assure that no temporary living facilities or places of refuge are hidden from view. Pallets shall be stacked or piled with due regard to the stability of piles, and in no case higher than 15 feet (4,572 mm). Rationale: Significant volume pallet storage increases the potential for loss due to the increased fire load. Keeping pallet stacks organized and orderly will assist in limiting the potential for pallets falling over and restricting f re spread. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) (y) Section 315.3.4.1 is hereby added to Chapter 3 of the 2010 Edition of the California Fire Code to read as follows: 315.3.4.1 Clearance around pallets. Aisles between and around open pallet stacks shall be at least 15 feet (4,572 mm) in width and maintained free from accumulated rubbish, equipment, or other articles or materials. Rationale: Combustible rubbish tends to accumulate around pallet stacks. These light fuels allow combustion to occur more readily if not cleaned up. Large amounts of pallet materials add to the fare hazard. This addition will standardize storage practices at facilities that stockpile substantial amounts of pallets in the City, and provide the fare department avenues to access the product piles if afire occurs. Justification: Climatic, Geologic, & Topographic (see justification A C & D listed in Attachment 2) (z) Chapter 3, Section 315.3.4.2 is hereby added to Chapter 3 of the 2010 Edition of the California Fire Code to read as follows: 315.3.4.2 Pallet storage next to structure/awning. When pallets are stored near a structure/awning, the height of the storage shall be restricted to no higher than the structure/awning and cannot exceed the height of the structure/awning, or 15 feet (4,572 mm), whichever is less. Rationale: Climatic, geologic, and topographic events or conditions may cause pallets to fall onto a structure/awing potentially causing serious injury or death & extensive property damage. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) 18 (aa) Section 503.2.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 503.2.1. Dimensions. Fire apparatus access roads shall have an unobstructed width 'of not less than 27 feet (8,229 mm) and an unobstructed vertical clearance of not less than 15 feet (4,472 mm). Rationale: The Fire Department emergency vehicles, are very large and difficult to maneuver when restrictions are placed on them during incidents. Additionally, some vehicles have outrigger supports that extend the footprint of the vehicle beyond the prescribed access road dimensions in the current fire code. This code modification increases the requirements of the fire apparatus access roads, thus providing sufficient space for movement and placement of emergency equipment. This change was previously adopted and included in Ordinance 1137. Justification: Administrative and Topographic (see justification A, and D listed in Attachment 2) (bb) Section 504.4 is hearby added to Chapter 5 of the 2010 Edition of the California Fire Code read as follows: 504.4. Roof top access and safety. Roof top solar photovoltaic systems shall be in accordance with Appendix K. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Administrative, Climatic, Geologic, & Topographic (see justification A, B, C & D listed in Attachment 2) (cc) Section 507.5 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 507.5. Fire hydrant systems. When any portion of the facility or building protected is in excess of 150 feet from a water supply on a public street, as measured by an approved route around the exterior of the facility or building, on -site fire hydrants and mains capable of supplying the required fire flow shall be provided when required by the chief. 19 Rationale: The City of Vernon has established standards for the spacing of fire hydrants. This change was previously adopted and included in Ordinance 1137. Justification: Administrative, Climatic, Geologic, & Topographic (see justification A, B, C & D listed in Attachment 2) (dd) Section 507.5.5 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 507.5.5. Clear space around hydrants. Clear space of 31 feet (9448.8 mm) in front of, 4 feet (914 mm) in rear of and 10 feet (3048 mm) on both sides shall be maintained around each onsite hydrant. Rationale: The City of Vernon has established standards for regulating the clear space around fire hydrants. This spacing standard assists in providing fire department apparatus direct access to fire hydrants. This change was previously adopted and included in Ordinance 1137. Justification: Administrative, Climatic, Geologic, & Topographic (see justification A, B, C & D listed in Attachment 2) (ee) Section 901.4 is hereby added to Chapter 9 of the 2010 Edition of the California Fire Code read as follows: 901.4.5 Protection of fire protection systems and equipment. Fire protection systems and equipment subject to possible vehicular damage shall be adequately protected with guard posts in accordance with Section 312 Vehicle Impact Protection, and modifications adopted under this code. Rationale: The City of Vernon is an industrial city, with large trucks, tractor -trailers, and heavy equipment moving on public and private roadways and property. Occasionally large vehicles strike protective guard posts bending, breaking and pushing them against fire protection equipment, hazardous materials containers, and other specialized appliances the posts are designed to protect. This code modification increases the requirements of the guard posts, thus providing better protection of the equipment. Justification: Administrative and Topographic (see justification A, and D listed in Attachment 2) PA (ff) Section 1504.2 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 1504.2.Location of spray -finishing operations. All inside or outside spray -finishing operations, shall be conducted in an approved spray booth constructed in accordance with Section 1504. Rationale: This code was amended to include regulations for spray finishing operations that may occur outside. This change was previously adopted and included in Ordinance 1137. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) (gg) Section 3301.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 3301.1. Prohibited and limited acts. Explosive materials shall not be manufactured, tested or stored within the limits of the City of Vernon. Rationale: Allowing explosive materials in or near densely positioned structures along with a sizeable general population creates an untenable potential for the City and its business activities. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) (hh) Section 3404.2.9.6.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 3404.2.9.6.1. Locations where above -ground tanks are prohibited. Storage of Class I and Class II liquids in above ground tanks outside of buildings within the City of Vernon and in areas 1,000 feet (304,800 mm) or more from the outside boundary of a kindergarten through 12t' grade public school shall be in approved containers not exceeding 10,000 gallons in size. In areas of a lot or parcel within 1,000 feet (304,800 mm) of the outside boundary of said school, the only Class I or Class II liquids approved for storage in above ground tanks is diesel fuel which shall be in approved containers and shall be limited to either two (2) 1,000 gallon tanks or one (1) 2,000 gallon tank. 21 Rationale: This code was amended to address storage and the separation from schools, and to define the volume of product stored. This change was previously adopted and included in Ordinance 1137. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) (ii) Section 3801.4 is hereby added to Chapter 38 of the 2010 Edition of the California Fire Code to read as follows: Sec. 3801.4 Inside storage or use. No LP -gases of any type or mixture shall be permitted in any occupancy either for sale, use or storage without approval of the fire code official. Rationale: Inside storage or use of LP -gas creates problems that can compromise workplace safety and potentially cause or add to the danger of fire department personnel fighting fires. LP - gas cylinders have been struck, fallen over and been damaged, leaked and rocketed around, and exploded when exposed to heat and fire. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) 6j) Section 3803.2.2 is hereby added to Chapter 38 of the 2010 Edition of the California Fire Code to read as follows: 3803.2.2.1 Portable containers on motorized equipment. The use of portable containers of LP - gas as motorized equipment fuel in occupancies is limited as follows: LP -gas fuel tanks on motorized equipment are limited to two per, vehicle with a combined capacity not to exceed 50 pounds. Refilling of tanks shall not be permitted within the occupancy and shall be permitted only in approved locations determined by the fire code official. Rationale: Inside storage or use of LP -gas creates problems that can compromise workplace safety and potentially cause or add to the danger of fire department personnel fighting f res. LP - gas cylinders have been struck, fallen over and been damaged, leaked and rocketed around, and exploded when exposed to heat and fire. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) (kk) Section 3804.1 of the 2010 Edition of the California Fire Code is hereby amended to read as follows: 22 38,04.1. Storage of liquefied petroleum gases. Storage and transportation of LP -gas and the installation and maintenance of pertinent equipment shall be in accordance with NFPA 58 and shall be subject to the approval of the fire code official. Storage is permitted within the limits of the City of Vernon except within 1,000 feet (304,800 mm) of a kindergarten through 12t' grade public school. Exception: Storage of LP -gas not exceeding 2,000 gallons per parcel in approved containers is permitted in all areas within the limits of the City of Vernon. Rationale: This code was amended to address storage and the separation from schools, and to define the volume ofproduct stored. This change was previously adopted and included in Ordinance 1137. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) (11) Chapter 38, Section 3804.3.2 is hereby added to Chapter 38 of the 2010 Edition of the California Fire Code is hereby amended by the addition of Section 3801.4.3.2 to read as follows: 3804.3.2 Tank orientation. Unless special protection is provided and approved by the fire code official, containers of LP -gas shall be oriented so that their longitudinal axes do not point toward other LP -gas containers, vital process equipment, control rooms, loading stations, flammable liquid storage tanks or required fire access roads. Rationale: Improperly positioned containers of pressurized flammable gas pose a significant fire and safety hazard to facilities, employees, and emergency responders. Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) (mm) Appendix C, of the 2010 Edition of the California Fire Code is hereby deleted. Rationale: Appendix C of the California Fire Code provides requirements for the locations and distribution office hydrants. The City of Vernon currently establishes standards for Fire Hydrant Location and Distribution. The requirements within the Fire Code would conflict with the City's requirements, therefore it is recommended that Appendix C of the California Fire Code be deleted. Justification: Administrative (see justification A listed in Attachment 2) 23 (nn) Section D103.1 of Appendix D of the 2010 Edition of the California Fire Code is hereby amended to read as follows: D103.1. Access road. The dimension of the fire access road turnarounds shall be in accordance with City of Vernon standards. Rationale Appendix D of the California Fire Code provides requirements for fire apparatus access roads. Previous City Codes have been amended to establish City regulations for Fire Access Road Turnarounds. The requirements within the Fire Code would conflict with the City's requirements, therefore it is recommended that Appendix D Section DI03.1 of the California Fire Code be amended to be in accordance with the City of Vernon standard. This change was previously adopted and included in Ordinance 1137 Justification: Administrative (see justification A listed in Attachment 2) 24 (oo) Appendix K is hereby added to the 2010 Edition of the California Fire Code to read as follows: APPENDIX K ROOF SOLAR PHOTOVOLTAIC SYSTEMS SECTION K101 SCOPE K101.1 Scope. This appendix shall apply to the design, construction, and installation of all solar photovoltaic systems when located on the roof of a building. Exception: 1. Buildings that are four or more stories in height and protected with an approved automatic fire extinguishing system throughout. 2. Non -habitable structures include, but are not limited to, shade structures, private carports, solar trellises, etc. Justification: Administrative (see justification A listed in Attachment 2) K101.2 Permits. The fire code official shall review and approve the installation of roof solar photovoltaic systems on buildings that obstruct more than 50% or 10,000 square feet of the total roof surface area prior to the building code official issuing a permit for the installation for such roof obstructions. See section 105.7 for required construction permits. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, .Geologic, & Topographic (see justification B, C & D listed in Attachment 2) 25 K101.3 Required construction document information. All roof top installations submitted for approval shall include the following: 1. Site plan to scale depicting the following: a. Dimensions of the building b. Location of all structures on site. c. Street address of building. d. Access from street to building. e. Location of roof top solar arrays, gardens, or landscaped areas. f. Location of disconnects. g. Location of signage. h. Location of required access paths. i. Northern reference 2. Roof and Elevation plan showing the following: a. Array or landscape placement. b. Roof ridge lines. c. Eave lines. d. Equipment on roof. e. Vents, skylights, roof hatches, etc. 3. Location and wording of all markings, labels and warning signs. 4. Building photographs that may be useful in the evaluation of the garden, landscaping, or array placement. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions " Justification: Administrative (see justification A listed in Attachment 2) 26 SECTION K102 DEFINITIONS K102.1 Definitions. For the purpose of this appendix, certain terms are defined as follows: ACCESS PATHWAY. A required walking pathway that is designed to provide emergency access to firefighters. ARRAY. An uninterrupted section of solar photovoltaic panels or modules or a group of interconnected sub -arrays. GRID. The electrical system that is on the service side of the electric meter. Designation of ridge, hip, and valley does not apply to roofs with 2-in-12 or less pitch. All roof dimensions are measured to centerlines. INVERTER. A device used to convert direct current (DC) electricity from the solar system to alternating current (AC) electricity for use in the building's electrical system or the grid. ROOF ACCESS POINT. An area that does not require ladders to be placed over building openings (i.e., windows, vents, or doors), and that are located at structurally strong points of building construction and in locations where ladders will not be obstructed by tree limbs, wires, signs or other overhead obstructions. SOLAR PHOTOVOLTAIC SYSTEM. A system of component parts that receives sunlight and converts it into electricity. SUB -ARRAY. Uninterrupted sections of solar photovoltaic panels interconnected into an array. TRAVEL DISTANCE. The walking distance between two points. VENTING CUT OUT. Section(s) in an array that are designed to accommodate emergency ventilating procedures. Rationale: These definitions were not included in section 2 of the CFC but are included in Appendix K for reference in the adoptions. Justification: Administrative — (see justification A listed in Attachment 2). 27 SECTION K103 ROOF SOLAR PHOTOVOLTAIC SYSTEMS K103.1. Solar photovoltaic systems. The requirements of`section K103 applies to all solar photovoltaic systems installed on the roof of buildings regardless of system size or if used for residential and commercial purposes. Roof solar photovoltaic systems shall be designed, constructed and installed in accordance with sections K103.2 through K103.5.3. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Administrative, Climatic, Geologic, & Topographic (see justification A, B, C & D listed in Attachment 2) K103.2 Marking. Photovoltaic systems shall be marked. Marking is needed to provide emergency responders with appropriate warning and guidance with respect to isolating the solar electric system. This canTacilitate identifying energized electrical lines that connect the solar panels to the inverter, as these should not be cut when venting for smoke removal. Materials used for marking shall be weather resistant. UL 969 shall be used as a standard for weather rating (UL listing of markings is not required). Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.2.1 Building's electrical system main service disconnect marking. The building's main electrical service disconnect shall be marked. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions " Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.2.1.1 Single and two dwelling unit residential buildings. The marking shall be placed within the main service disconnect. Exception: If the main service disconnect is operable with the service panel closed, then the marking shall be placed on the outside cover. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) 28 K103.2.1.2 Commercial and industrial buildings. The marking shall be placed adjacent to the main service disconnect in a location clearly visible from the location where the lever is operated. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.2.1.3 Marking content and format. Marking content and format shall be as follows. L Marking content: "CAUTION: SOLAR ELECTRIC SYSTEM CONNECTED" 2. Red background 3. White lettering 4. Minimum 3/8" letter height 5. All capital letters 6. Arial or similar font, non -bold 7. Reflective weather resistant material suitable for the environment (durable adhesive materials must meet this requirement) Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions " Justification; Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.2.2 Photovoltaic circuits marking. Photovoltaic circuit marking is required on all interior and exterior photovoltaic DC circuit conduits, raceways, enclosures, cable assemblies and junction boxes to alert firefighters to avoid cutting them. Marking shall be placed every 10 feet (3048 mm), at turns, and above and/or below penetrations, and at all photovoltaic circuit combiner and junction boxes. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.2.2.1 Marking content and format. Marking content and format shall be as follows. 1. Marking content: "CAUTION: SOLAR CIRCUIT" 2. Red background 3. White lettering 4. Minimum 3/8" letter height 5. All capital letters 6. Arial or similar font, non -bold 29 7. Reflective weather resistant material suitable for the environment (durable adhesive materials must meet this requirement) Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.2.3 Inverter marking. No markings are required for the inverter unless the inerter is used also as a required remote electrical disconnect. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103,2.4 Remote electrical disconnect marking. Marking shall be located immediately next to the remote electrical disconnect control as follows: 1. Marking content: "CAUTION: SOLAR CIRCUIT DISCONNECT" 2. Red background 3, White lettering 4. Minimum 3/8" letter height 5. All capital letters 6. Arial or similar font, non -bold 7. Reflective weather resistant material suitable for the environment (durable adhesive materials must meet this requirement) Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.3 Remote electrical disconnect. Photovoltaic circuits shall be equipped with a means for remote electrical disconnect located downstream from the photovoltaic array at the point where the photovoltaic circuit first enters the structure, or at another approved location. The manual control to operate the remote electrical disconnect shall be located within five feet of the building's main electrical panel. The remote electrical disconnect shall be listed and meet the requirements of the California Electrical Code. Exceptions: 30 l . Photovoltaic circuits contained in rigid or electrical metallic tubing running between the array combiner box and the main electrical panel which are entirely exterior to the building need not be equipped with a means of remote electrical disconnect other than the disconnects intrinsic to the system. 2. Photovoltaic circuits contained in rigid or electrical metallic tubing running between the array combiner box and the main electrical panel that run through the interior of the building when installed a minimum of 18" below the roof assembly when measured parallel to the surface of the roof. 3. The photovoltaic system inverter may be used for remote electrical disconnect when the inverter is located immediately upstream of the roof penetration where the circuit enters the structure. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4 Access pathways and emergency ventilation. Access and spacing requirements shall be provided in order to ensure firefighter access to the roof, provide access pathways to specific areas of the roof, provide for venting cut out areas, and to provide emergency egress from the roof. For the purpose of access pathways and emergency ventilation, designation of ridge, hip, and valley does not apply to roofs with 2-in-12 or less pitch. All roof dimensions are measured to centerlines. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions " Justification: Climatic, Geologic, & Topographic (see justification A C & D listed in Attachment 2) K103.4.1 Alternative materials and methods. Alternative materials and methods per Section 104.9 for access pathways or venting cut outs may be requested for approval by the fire code official due to: 1. Unique site specific limitations 2. Alternative access opportunities (as from adjoining roofs) 3. Ground level access to the roof area in question 4. Other adequate venting cut out opportunities when approved by the fire code official. 31 5. Adequate venting cut out areas afforded by panel set back from other roof top equipment (for example: shading or structural constraints may leave significant areas open for ventilation near HVAC equipment.) 6. Automatic ventilation device. 7. New technology, methods, or other innovations that ensure adequate fire department access pathways and ventilation opportunities. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.2 Single and two dwelling unit residential buildings access pathways and venting cut outs. Access pathways and venting cut outs for single and two dwelling unit residential buildings shall be provided as per Section KI03.4.2.1 through K103.4.2.4. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.2.1 Hip roof layout. Solar modules shall be located in a manner that provides one three (3') foot wide clear access pathway from the eave to the ridge on each roof slope where solar modules are located. The access pathway shall be located at a structurally strong location on the building, such as a bearing wall. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.2.2 Single roof ridge. Solar modules shall be located in a manner that provides two three (3') foot wide access pathways from the eave to the ridge on each roof slope where solar modules are located. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) 32 K103.4.2.3 Roof hips and valleys. Solar modules shall be located no closer than one and one half (1.5') feet to a hip or a valley if modules are to be placed on both sides of a hip or valley. If the solar modules are to be located on only one side of a hip or valley, that is of equal length then, the panels may be placed directly adjacent to the hip or valley. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, &Topographic (see justification B, C & D listed in Attachment 2) K103.4.2.4 Venting cut out areas. Solar modules shall be located no higher than three (3') feet below the ridge. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions " Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.3 Commercial and industrial buildings and multi -residential buildings containing three or more dwelling units required access pathways and venting cut outs. Access pathways and venting cut outs for commercial and industrial buildings and multi -residential buildings containing three or more dwelling unit s shall be provided as accordance with Section K103.4.3.1 through K103.4.3.2.6. Exception: If the fire code official determines that the roof configuration is similar to that found in single and two dwelling unit residential buildings, the design requirements found in Section K103.4.2 may be utilized. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.3.1 Array dimension. Arrays shall be no greater than 150 feet (45,720 mm) by 150 feet (45,720 mm) in distance in either axis. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions " Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.3.2 Access pathways: Access pathways shall be established in the design of the photovoltaic system installation. Access pathways shall be provided in accordance with Section K103.4.3.2.1 through K103.4.3.2.5. 33 Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.3.2.1 Access pathways perimeter of the roof. There shall be a minimum six (6') foot (1,828 mm) wide clear perimeter around the edges of the roof. Exception: If either axis of the building is 250 feet 976,200 mm) or less, there shall be a minimum four (4') (1,219 mm) feet wide clear perimeter around the edges of the roof, Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.3.2.2 Access pathway location. The center line axis of access pathways shall run on structural members or over the next closest structural member nearest to the center lines of the roof. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.3.2.3 Access pathway center line. The center line axis of access pathways shall be provided in both axis of the roof. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions " Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.3.2.4 Access pathway alignment. Access pathways shall be in a straight line and provide not less than four (4') feet (1,219 mm) clear to skylights, ventilation hatches or roof standpipes. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.3.2.5 Access pathway around roof access hatches. Access pathways shall provide not less than four (4') feet (1,219 mm) of clearance around roof access hatch with at least one not less than four feet (4') (1,219 mm) clear pathway to parapet or roof edge. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" 34 Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.4.3.2.6 Venting cut out areas. Venting cut outs between array sections shall be either: 1. An access pathway eight (8') feet (2,438 mm) or greater in width. 2. An access pathway that is four (4') feet (1,219 mm) or greater in width and bordering on existing roof skylights or ventilation hatches. 3.An access pathway that is four (4') feet (1,219 mm) or greater in width and bordering four (4') feet (1,219 mm) by eight (8') feet (2,438 mm) venting cut outs every twenty (20') feet (6,096 mm) on alternating sides of the access pathway. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.5 Location of conductors. Conduit, wiring systems and wiring raceways for photovoltaic circuits shall be provided in accordance with Section K103.5.1 through K103.5.3. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & Dlisted in Attachment 2) K103.5.1 Conductor location. Conduit, wiring" systems, and wiring raceways shall be located as close as possible to the ridge or hip or valley and from the hip or valley as directly as possible to an outside wall to reduce trip hazards and maximize venting cut out areas. Rationale: Description is very detailed; see Attachment 2 ".Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) K103.5.2 Conductors between sub arrays and DC combiner boxes. Conduit runs between sub arrays and to DC combiner boxes shall use the design that minimizes the total amount of conduit on the roof by taking the shortest path from the array to the DC combiner box. The DC combiner boxes are to be located such that conduit runs are minimized in the pathways between arrays. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions" Justification: Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) 35 K103.5.3 Conduit within enclosed spaces. To limit the hazard of cutting live conduit in venting operations, DC wiring shall be run in metallic conduit or raceways when located within enclosed spaces in a building and shall be run, to the maximum extent possible, along the bottom of load - bearing members. Rationale: Description is very detailed; see Attachment 2 "Rationale -Roof Obstructions " Justification:, Climatic, Geologic, & Topographic (see justification B, C & D listed in Attachment 2) EXAMPLE - SOLAR ARRAY FOR A LARGE COMMERICAL OR INDUSTRIAL BUILDING. EIGHT (8') FOOT ACCESS PATHWAYS. Figure K-03 36 EXAMPLE - SOLAR ARRAY OR FOR A SMALL COMMERICAL OR INDUSTRIAL BUILDING. EIGHT (8') ACCESS PATHWAYS. FOUR FOOT (4') X EIGHT (8') FOOT VENTING CUT OUTS EVERY TWENTY(20') FEET ALONG THE ACCESS PATHWAY. THE BUILDING AXIS IS LESS THAN TWO HUNDRED AND FIFTY FEET (250'). Figure K-06 91.1 ATTACHMENT #2 Justifications for Amendments to Part 9 of Title 24 of the California Code of Regulations 39 Key to Justifications for Amendments to Part 9 of Title 24 of the California Code of Regulations A This amendment is necessary for administrative clarification and does not modify a Building Standard pursuant to Sections 17958, 17958.5, and 17958.7 of the California Health and Safety Code. This amendment establishes administrative standards for the effective enforcement of building standards throughout the City of Vernon. B This amendment is justified on the basis of a local climatic condition. The seasonal climatic conditions during the late summer and fall create severe fire hazards to the public health and welfare in the City of Vernon. The hot, dry weather in combination with Santa Ana winds results in extreme fire conditions for the community. The aforementioned conditions combined with the geological characteristics of the county and near the City create hazardous conditions for which departure from the California Building Standards Code is required. C This amendment is justified on the basis of local geological condition. The City of Vernon is subject to earthquake hazards caused by its location in an active seismic activity area. Faults which potentially cause seismic activity in the City include the Whittier Fault to the east, the Raymond Fault to the north, and the Newport -Inglewood Fault to the west. Said faults are generally considered major Southern California earthquake faults which may experience rupture at any time. Thus, because the City is within seismic area which includes earthquake faults within the County of Los Angeles and near the City, the modifications and changes cited herein are designed to better limit property damage as a result of seismic activity and to establish criteria for repair of damaged property following a local emergency. D This amendment is justified on the basis of local topographical condition. The of the City of Vernon is coupled with the density of buildings, limited setbacks, narrow access to buildings, narrow streets potentially create a problem for governmental agencies to respond to emergency conditions. Additionally, long periods of dry, hot weather, combined with unpredictable seasonal winds (Santa Ana wind conditions) result in increased exposure to fire risk. The heavy rains tend to over -saturate the soil for a short time period during the year, having a detrimental effect on in -ground structures affected by varying moisture conditions. 40 Rationale for Roof Obstructions Associated with Roof Solar Photovoltaic Systems Unregulated installations of solar photovoltaic systems located on the roofs' of buildings can create conditions which severely hinder firefighting ventilation operations. Firefighting ventilation allows the escape of heat, smoke, and gases from the interior compartments of a building, reduces the chances of flashover condition, and greatly helps restore and maintain a tenable interior environment in a building during a fire. In many firefighting situations, roof top vertical ventilation is the only form of ventilation that can be employed to meet the need to quickly and effectively ventilate a building's interior. Rapid ventilation is often a critical element in allowing firefighters to enter a burning building to search for and rescue occupants, control the spread of fire, and create a tenable environment to extend the time a person could survive within a burning building. In order to traverse a roof to place an effective ventilation opening near a fire, it is required that firefighters have access to the roof surface of a building. Firefighters utilize techniques including "sounding" roofs with tools such as a rubbish hook, cutting small inspection holes with power saws in roofs to check for extension, and by using infrared cameras to check for heat concentrations on the surface of a roof. Installing roof obstructions without regard for firefighting ventilation operations may prevent firefighters from safely traveling along strong underlying roof structural members. Installing layers of waterproofing, building material, soil, and vegetation to the surface of a roof will very likely delay or preclude firefighting roof top ventilation operations unless consideration for ventilation operations were incorporated into the layout design of the roof obstruction. 41 ATTACHMENT #3 Vernon Fire Department Fee Schedule 42 OPERATIONAL PERMIT FEES —ANNUAL INSPECTION REQUIRED DESCRIPTION FEE(based on $p/hr) Amusement Buildings $ Carnivals and Fairs $ per event Cellulose Nitrate Film $ Combustible Dust -Producing Operations $ Combustible Fiber Storage (>100 cu. ft.) $ Cutting and Welding $ Dry Cleaning Plants $ Exhibits & Trade Shows $ per event Fire Hydrants and Valves $ Floor Finishing $ Fumigation & Thermal Insecticidal Fogging $ General Use $ High -Piled Storage $ Hot Work Operations $ Industrial Ovens $ Lumber Yards, Woodworking Plants, and Pallet Storage $ Liquid -or -Gas Fueled Vehicles or Equipment in Assembly Buildings $ Magnesium (workings only; no fee for storage) $ Misc. Combustible Material Storage (Q2' high/min. 2500 cu. ft.) $ Open Burning $ Open Flame & Torches $ Open Flame & Candles $ Private Hydrants (annual test per 5 hydrants) $ Pyrotechnic Special Effects Material $ Pyroxylin Plastics $ Spraying or Dipping $ Storage of Scrap Tires & Tire Byproducts $ Temporary Membrane Structures & Tents (less than one week) $ per event Temporary Membrane Structures & Tents $ Tire -Rebuilding Plants $ Waste Handling $ Wood Products $ Late Fee (penalty based on each 30-day delay) % Failure to Obtain a Permit double permit Investigation — Work w/out Permit double permit EFFECTIVE DATE: January 1. 2011 RESOLUTION NO. **** 43 I of 2 INSPECTION AND OTHER FEES DESCRIPTION FEES Annual occupancy inspection no charge Inspection outside of normal business hours $/hr. (minimum charge — four fours) Reinspection fee $/hr. Self -inspection occupancy (failure to return completed form) $/hr. Additional structural plan review required by $/hr. changes, additions or revisions to plans Additional plan review, non-structural, required $/hr. by changes, additions, or revisions Fire code variance $ Administrative charge (i.e. weed abatement per parcel) $ False alarm response Vt/2nd (12 month period) no charge False alarm response 3rd or more (12 month period) $ each Fire watch/standby conditions — apparatus w/ crew (each hr.) $ Hazardous materials emergency response - per H& S Code Sec. 13009.6 actual response cost Community Training Program CPR/AED (4 hrs.)-limit $ students per trainer $ per student Portable fire extinguisher (2 hrs.) — lecture & extinguisher use $ per group - company provides fire extinguishers -16 students per session Safety & emergency preparation (2 hrs.) —20 students p/ group $ per group Evacuation exercise & critique (1/2 hr.)- fire apparatus w/ crew $ per event EFFECTIVE DATE: January 1. 2011 RESOLUTION NO. **** 2 of 2 44 Exhibit "A" 2010 California Fire Code Excerpts from Chapter 1 Part 2 Administrative Provisions 45 EXHIBIT "A" .2010 CALIFORNIA FIRE CODE Excerpts from Chapter I Part 2 ADMINISTRATIVE PROVISIONS SECTION 103 — DEPARTMENT OF FIRE PREVENTION 103.1 General. The department of fire prevention is established within the jurisdiction under the direction of the fire code official. The function of the department shall be the implementation, administration and enforcement of the provisions of this code. 103.2. Appointment. The fire code official shall be appointed by the chief appointing authority of the jurisdiction; and the fire code official shall not be removed from office except for cause and after full opportunity to be heard on specific and relevant charges by and before the appointing authority. 103.3 Deputies. In accordance with the prescribed procedures of this jurisdiction and with the concurrence of the appointing authority, the fire code official shall have the authority to appoint a deputy fire code official, other related technical officers, inspectors, and other employees. 103.4 Liability. The fire code official, member of the board of appeals, officer or employee charged with the enforcement of this code, while acting for the jurisdiction, in good faith and without malice in the discharge of the duties required by this code or other pertinent law or ordinance, shall not thereby be rendered liable personally, and is hereby relieved from all personal liability for any damage accrued to persons or property as a result of an act or by reason of an act or omission in the discharge of official duties. 103,4.1 Legal Defense. Any suit instituted against any officer or employee because of an act performed by that officer or employee in the lawful discharge of duties and under the provisions of this code shall be defended by the legal representative of the jurisdiction until the final termination of the proceedings. The fire code official or any subordinate shall not be liable for costs in an action, suit or proceeding that is instituted in pursuance of the provisions of this code; and any officer of the department of fire prevention, acting in good faith and without malice, shall be free from liability for acts performed under any of its provisions or by reason of any act or omission in the performance of official duties in connection therewith. SECTION 104 — GENERAL AUTHORITY AND RESPONSIBILITIES 104.1 General. The fire code official is hereby authorized to enforce the provisions of this code and shall have the authority to render interpretations of this code, and to adopt policies, procedures, rules and regulations in order to clarify the application of its provisions. Such interpretations, policies, procedures, rules and regulations shall be in compliance with the intent and purpose of this code and shall not have the effect of waiving requirements specifically provided for in this code. 104.3 Right of entry. Where it is necessary to make an inspection to enforce the provisions of this code, or whenever the fire code official has reasonable cause to believe that there exists in a building or upon any premises any conditions or violations of this code which make the building or premises unsafe, dangerous or hazardous, the fire code official shall have the authority to.enter the building or premises at all reasonable times to inspect or to perform the duties imposed upon the fire code official by this code. If such building or premises is occupied, the fire code official shall present credentials to the occupant and request entry. If such building or premises is unoccupied, the fire code official shall first make a reasonable effort to locate the owner or other person having charge or control of the building or premises and request entry. If entry is refused, the fire code official has recourse to every remedy provided by law to secure entry. 104.3.1 Warrant. When the fire code official has first obtained a proper inspection warrant or other remedy provided by law to secure entry, an owner or occupant or person having charge, care or control of the building or premises shall not fail or neglect, after proper request is made as herein provided, to permit entry therein by the fire code official for the purpose of inspection and examination pursuant to this code. 104.5 Notices and orders. The fire code official is authorized to issue such notices or orders as are required to affect compliance with this code in accordance with Appendix Chapter 1, Sections 109.1 and 109.2. SECTION 106 - INSPECTIONS 106.1 Inspection authority. The fire code official is authorized to enter and examine any building, structure, marine vessel, vehicle or premises in accordance with Appendix Chapter 1, Section 104.3 for the purpose of enforcing this code. SECTION 109 — VIOLATIONS 109.1 Unlawful acts. It shall be unlawful for any person, firm or corporation to erect, construct, alter, repair, remove, demolish or utilize a building, occupancy, premises or system regulated by this code, or cause same to be done, in conflict with or in violation of any of the provisions of this code. 109.2 Notice of violation. When the fire code official finds a building, premises, vehicle, storage facility or outdoor area that is in violation of this code, the fire code official is authorized to prepare a written notice of violation describing the conditions deemed unsafe and, when compliance is not immediate, specifying a time for reinspection. 109.2.1 Service. A notice of violation issued pursuant to this code shall be served upon the owner, operator, occupant, or other person responsible for the condition or violation, either by personal service, mail, or by delivering the same to, and leaving it with, some person of responsibility upon the premises. For unattended or abandoned locations, a copy of such notice of violation shall be posted on the premises in a conspicuous place at or near the entrance to such premises and the notice of violation shall be mailed by certified mail with return receipt requested or a certificate of mailing, to the last known address of the owner, occupant or both. 109.2.2 Compliance with orders and notices. A notice of violation issued or served as provided by this code shall be complied with by the owner, operator, occupant or other person responsible for the condition or violation to which the notice of violation pertains. 109.2.3 Prosecution of violations. If the notice of violation is not complied with promptly, the fire code official is authorized to request the legal counsel of the jurisdiction to institute the appropriate legal proceedings at law or in equity to restrain, correct or abate such violation or to require removal or termination of the unlawful occupancy of the structure in violation of the provisions of this code or of the order or direction made pursuant hereto. 109.2.4 Unauthorized tampering. Signs, tags or seals posted or affixed by the fire code official shall not be mutilated, destroyed or tampered with or removed without authorization from the fire code official. 109.3 Violation penalties. Persons who shall violate a provision of this code or shall fail to comply with any of the requirements thereof or who shall erect, install, alter, repair or do work in violation of the approved construction documents or directive of the fire code official, or of a permit or certificate sued under provisions of this code, shall be guilty of a misdemeanor, punishable by a fine of not more than $5,000.00 or by imprisonment not exceeding 6 months, or both such fine and imprisonment. Each day that a violation continues after due notice has been served shall be deemed a separate offense. 109.3.1 Abatement of violation. In addition to the imposition of the penalties herein described, the fire code official is authorized to institute appropriate action to prevent unlawful construction or to restrain, correct or abate a violation; or to prevent illegal occupancy of a structure or premises; or to stop an illegal act, conduct of business or occupancy of a structure on or about any premises. SECTION 110 — UNSAFE BUILDINGS 110.1 General. If during the inspection of a premises, a building or structure or any building system, in whole or in part, constitutes a clear and inimical threat to human life, safety or health, the fire code official shall issue such notice or orders to remove or remedy the conditions as shall be deemed necessary in accordance with this section and shall refer the building to the building department for any repairs, alterations, remodeling, removing or demolition required. 110.1.1 Unsafe conditions. Structures or existing equipment that are or hereafter become unsafe or deficient because of inadequate means of egress or which constitute a fire hazard, or are otherwise dangerous to human life or the public welfare, or which involve illegal or improper occupancy or inadequate maintenance, shall be deemed an unsafe condition. A vacant structure which is not secured against unauthorized entry as required by Section 311 shall be deemed unsafe. 110.1.2 Structural hazards. When an apparent structural hazard is caused by the faulty installation, operation or malfunction of any of the items or devices governed by this code, the fire code official shall immediately notify the building code official in accordance with Appendix Chapter 1, Section 110.1. 110.2 Evacuation. The fire code official or the fire department official in charge of an incident shall be authorized to order the immediate evacuation of any occupied building deemed unsafe when such building has hazardous conditions that present imminent danger to building occupants. Persons so notified shall immediately leave the structure or premises and shall not enter or re-enter until authorized to do so by the fire code official or the fire department official in charge of the incident. 110.3 Summary abatement. Where conditions exist that are deemed hazardous to life and property, the fire code official or fire department official in charge of the incident is authorized to abate summarily such Hazardous conditions that are in violation of this code. 110.4 Abatement. The owner, operator, or occupant of a building or premises deemed unsafe by the fire code official shall abate or cause to be abated or corrected such unsafe conditions either by repair, rehabilitation, demolition or other approved corrective action. SECTION I I I — STOP WORK ORDER 111.1 Order. Whenever the fire code official finds any work regulated byrthis code being performed in a manner contrary to the provisions of this code or in a dangerous or unsafe manner, the fire code official is authorized to issue a stop work order. 111.2 Issuance. A stop work order shall be in writing and shall be given to the owner of the property, or to the owner's agent, or to the person doing the work. Upon issuance of a stop work order, the cited work shall immediately cease. The stop work order shall state the reason for the order, and the conditions under which the cited work is authorized to resume. 111.3 Emergencies. Where an emergency exists, the fire code official shall not be required to give a written notice prior to stopping the work. 111.4 Failure to comply. Any person who shall continue any work after having been served with a stop work order, except such work as that person is directed to perform to remove a violation or unsafe condition, shall be liable to a fine of not less than $100 or more than $5,000. SECTION 112 — SERVICE UTILITIES 112.1 Authority to disconnect service utilities. The fire code official shall have the authority to authorize disconnection of utility service to the building, structure or system in order to safely execute emergency operations or to eliminate immediate hazard. The fire code official shall notify the serving utility and, whenever possible, the owner and occupant of the building, structure or service system of the decision to disconnect prior to taking such action if not notified prior to disconnection. The owner or occupant of the building, structure or service system shall be notified in writing as soon as practical thereafter. SECTION 113 - FEES 113.1 Fees. A permit shall not be issued until fees have been paid, nor shall an amendment to a permit be released until the additional fee, if any, been paid. 113.2 Schedule of permit fees. A fee for each permit shall be paid as required, in accordance with the schedule as established by the applicable governing authority. 113.3 Work commencing before permit issuance. Any person who commences any work, activity or operation regulated by this code before obtaining the necessary permits shall be subject to an additional fee established by the applicable governing authority, which shall be in addition to the required permit fees. CHAPTER 47 REFERENCED STANDARDS This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the pro- mulgating agency of the standard, the standard identification, the effective date and title, and the section or sections of this document .that reference the standard. The application of the, referenced standards shall be as specified in Sections 1.1.5, 1.1.7 and 102.6. American Association of State Highway and Transportation Officials AASHTO 444 North Capitol Street, Northwest, #249 Washington; DC 20001 Standard Referenced reference in code number Title section number HB-17-2002 Specification for Highway Bridges, 17th Edition 2002....................................................503.2.6 Architectural Fabric Structures Institute c/o Industrial Fabric Association International AFSI 1801 County Road B West Roseville, MN 55113 Standard Referenced reference in code number Title section number ASI-77 Design and Standard Manual ................................................ .....................2403.10.2 American Petroleum Institute API 1220 L Street, Northwest 1 1 Washington, DC 20005 Standard Referenced reference in code number Title section number Spec 12P—(1995) Specification for Fiberglass Reinforced Plastic Tanks ..... ...........................................3404.2.13.1.5 (Reaffirmed2000) RP 651—(1997) Cathodic Protection of Aboveground Petroleum Storage Tanks......................................3406.7, 3406.7.1 Std 653—(2001) Tank Inspection, Repair, Alteration and Reconstruction...................................................3406.7 RP 752—(2003), Management of Hazards Associated with Location of Process Plant Buildings, CMA Managers Guide ...... ..... .. ........ ... 3406.7 RP 1604—(1996) Closure of Underground Petroleum Storage Tanks ... .............................................3404.2.13 RP 1615—(1996) Installation of Underground -petroleum Storage Systems........................................3404.2.13.1.5, 3406.7 Std 2000—(1998) Venting Atmosphere and Low-pressure Storage Tanks: Nonrefrigerated and Refrigerated .................... 3404.2.7.3.6 RP 2001—(2005) Fire -Protection in'Refineries, 8th Edition ..... ..... 3406.7 RP 2003—(1998) Protection Against Ignitions Arising out of Static, Lightning and Stray Currents ................................ 3406.7 Publ 2009-(2002) Safe Welding and Cutting Practices in Refineries, Gas Plants and Petrochemical Plants .......................... 3406.7 Std 2015—(2001) Safe Entry and Clearing of Petroleum Storage Tanks...............................................3406.7, 3406.7.2 RP 2023--{2001) Guide for Safe Storage and Handling of Heated Petroleum -derived Asphalt Products and Crude -oil Residue .................... .................... ....... ...............3406.7, 3, 0W&7.3 Pub12028—(2002) Flame Arrestors in Piping Systems ................................................. ........3404.2.7.3.2 Publ 2201—(2003) Procedures for Welding or Hot Tapping on Equipment in Service............................................3406.7 RP 2350—(2005) Overfill Protection for Storage Tanks in Petroleum Facilities, 3rd Edition .................. 3404.2.7.5.8, 3406.4.6, 3406.7 The American Society of Mechanical Engineers ASME Three Park Avenue New York, NY 10016-5990 Standard Referenced reference in code number Title section number A13.1-96 (Reaffirmed 2002) Scheme for the Identification of Piping Systems ........................ 2609.3, 2703.2.2.1, 3003.4.3, 3203.4.5, 3403.5.2 A17.1-2007/CSA B44-07 Safety Code for Elevators and Escalators...........................................508.1.5, 607.1, 907.4.3, 1007.4 2010 CALIFORNIA FIRE CODE 545 11 REFERENCED STANDARDS ASME—continued A17.3-2005 Safety Code for Existing Elevators and Escalators.........................................................4603.2 A18.4-2005 Safety Standard for Platform Lifts and Stairway Chair Lifts................................................604.2.6 B 16.18-2001 . Cast Copper Alloy., Solder Joint Pressure Fittings ........................................................909.13.1 (Reaffirmed 2005) B 16.22-2001 Wrought Copper and Copper Alloy Solder joint Pressure Fittings..........................................909.13.1 .(Reaffirmed 2005) B31.1-2004 Power Piping ............................. ............ ......................... 7 .......... Table 3403.6.2 B31.3-2004 Process Piping ........................... ..........................2209.5.4.3.1,.2703.2.2.2, Table 3403.6.2 B31.4-2006 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids .........I ................... Table 3403.6.2 B31.9-2004 Building Services Piping ....................................................Table 3403.6.2, 3403.6.3, 3403.6.11 BPE —2009 Bio processing Equipment Standani BPVC-2004 ASME Boiler and Pressure Vessel Code (Sections I,11, IV, V & VI, VIII) ..................:...:... 2209.5.4.2, 2703.2.1, 3003.2, 3003.3.2, 3203.4.3, 3203.7, 3404.2.13.1.5, 3506.3.1, 3506.4.1, 3506.4.8 ASTM International Barr Harbor DriveASTM WestConshohock, PA 19428-2959 Standard Referenced reference in code number Title section number B 42-02e01 Specification for Seamless Copper Pipe, Standard Sizes ........................... . .....................909.13.1 B 43-98(2004) Specification for Seamless Red Brass Pipe, Standard Sizes...............................................909.13.1 B 68-02 Specification for Seamless Copper Tube, Bright Annealed................................................909.13.1 B' 88--03 Specification for Seamless Copper Water Tube.........................................................909.13.1 B 251-02e01 Specification for General Requirements for Wrought Seamless Copper and Copper -alloy Tabe...................909.13.1 B 280-03 Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service ................... 909.13.1 D 56-05 Test Method for Flash Point by Tag Closed Tester........................................................3402.1 D 86-07a Test Method for Distillation of Petroleum Products at Atmospheric Pressure...................................2702.1 D 92-05a Test Method for Flash and Fire Points by Cleveland Open Cup.................................1501.2, 3401.2, 3402.1 D 93-07 Test Method for Flash Point by Pensky-Martens Closed Up Tester...........................................3402.1 D 323-06 Test Method for Vapor Pressure of Petroleum Products (Reid Method).......................................2702.1 D 3278—(2004)e01 Test Methods for Flash Point of Liquids by Small Scale Closed -cup Apparatus..................................3402.1 E 84 07 Test Method for Surface Burning Characteristics of Building Materials ............. 802.1, 803.1, 803.1.1, 803.1.2, 803.5.1, 803.6.2, 803.9, 804.1, 804.1.1, 804.2.4 E 681-04 Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) ........................ 3502.1 E 1354-04a Standard Test Method for Heat and Visible Smoke Release Rates forMaterials and Products Using an Oxygen Consumption Calorimeter..' ........................... 304.3.2, 304.3.4, 317.1, 808.1 E 1529--06 Test Method for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies............................................................3404.2.9.2.3 E 1537--07 Test Method for Fire Testing of Upholstered Furniture ......................... 805.1.1.2, 805.2.1.2, 805.3.1.2, 805.4.1.2 E 1590-07 Test Method for Fire Testing of Mattresses ................................... 805.1.2.2, 805.2.2.2, 805.3.2.2, 805.4.2.2 E1966-01 Test Method for Fire-resistant Joint Systems..............................................................702.1 E 2072-04 Standard Specification for Pholuminescent (Phosphorescent) Safety Markings.................................1024.4 E 2404-07a Standard Practice for Specimen Preparation and Mounting of'li xtile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics............................................803.6.2 E 2573-07 Standard Practice for Specimen Preparation and Mounting of Site -fabricated Stretch Systems to Assess Surface Burning Characteristics.............................................................803.9 F 2200--05 Standard Specification for Automated Vehicular Gate Construction..............................503.5, 503.6, D103.5 Builders Hardware Manufacturers' Association B HMA 355 Lexington Avenue, 17th Floor New York, NY 10017-6603 Standard Referenced reference in code number Title section number A156.10-05 American National Standard for Power -operated Pedestrian Doors........................................1008.1.4.2 A156.19-02 American National Standard for Power Assist and Low -energy Power -operated Doors........................1008.1.4.2 f 546 2010 CALIFORNIA FIRE CODE REFERENCED STANDARDS State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation CA 3485 Orange Grove Avenue North Highlands, CA 95660-5595 Standard Referenced reference in code number Title section number California Technical Bulletin 129-1992 Flammability Test Procedure for Mattresses for Use in Public Buildings........... 805.1.1.2, 805.2.2.2, 805.3.2.2, 805.4.2.2 California Technical Bulletin 133-1991 Flammability Test Procedure for Seating Furniture for Use in Public Occupancies ........... 805.1.1.2, 805.2.1.2, 805.4.1.2 Compressed Gas Association 4221 Walney Road, 16th Floor C GA Arlington, VA 20151-2923 Standard reference Referenced . number - Title in code section number C-7—(2004) Guide to the Preparation of Precautionary Labeling and Marking of Compressed Gas Containers......... 3003.4.2, 3203.4.2 G-13—(2006) Storage and Handling of Silane and Silane Mixtures (an American National Standard) .............. 4104.1, 4104.2, 4105.3 P-1—(2000) Safe Handling of Compressed Gases in Containers....................:.......:..........................3005.7 ANSI/P-18—(2006) Standard for Bulk Inert Gas Systems at Consumer Sites (an American.National Standard) ........................ 3201.1 P-20—(2003) Standard for Classification of Toxic Mixtures .............................................. .. .:E103.1.3.1. P-23—(2003) Standard for Categorizing Gas Mixtures Containing Flammable and Nonflammable Components ....... . ........ E102.1.2 S-1.1—(2005) Relief Device Standards —Part 1—Cylinders for Compressed Gases ........................ 2209.5.4.2, 3003.3.2, 3203.2 S-1.2- (2005) Pressure Relief Device Standards —Part 2—Cargo and Portable Tanks for Compressed Gases.............................................................2209.5.4.2, 3003.3.2, 3203.2 S-1.3--(2005) Pressure Relief Device Standards -Part 3—Stationary Storage Containers for Compressed Gases..................................................2209.5.4.2, 2209.5.4.3.5, 3003.3.2, 3203.2 V-1—(2005) Standard for Gas Cylinder Valve Outlet and Inlet Connections............................................2605.2.1 Coast Guard Regulations c/o Superintendent of Documents. C GR U.S. Government Printing Office Washington, DC 20402-9325 Standard Referenced reference in code number Title section number 46 CFR Parts 30, 32, 35 & 39-1999 Shipping .............. .......................................................................3406.8 Consumer Product Safety Commission CPS 4330 East West Highway Bethesda, MD 20814 Standard Referenced reference in code number Title section number 16 CFR Part 1500.41-1984 Method for Testing Primary Irritant Substances........................................................ ..202 16 CFR Part 1500.42-1984 . Test for Eye Irritants..................................................................................202 16 CFR Part 1500.44-2001 Method for Testing Extremely Flammable and Flammable Solids...........................................3602.1 16 CFR Part 1500-1984 Hazardous Substances and Articles; Administration and Enforcement Regulations ...................... 3301.1.3, 3302.1 16 CFR Part 1507-2001 Fireworks Devices..........................................................................3301.1.3. 3302.1 2010 CALIFORNIA FIRE CODE 547 REFERENCED STANDARDS U.S. Department of Commerce DO 1401 Constitution Avenue, NW Washington, DC 20230 Standard Referenced reference in code number Title section number 16 CFR Part 1632-1999 Standard for the Flammability of Mattress and Mattress Pads (FF 4-72, Amended)................................................805.1.2.1, 805.2.2.1, 805.3.2.1, 805.4.2.1 U.S. Department.of Labor c/o Superintendent of Documents DOT U.S. Govemment Printing Office jJ Washington, DC 20402-9325 Standard Referenced reference in code number Title section number 29 CFR Part 1910.1000-1974 Air Contaminants ...... :.................................................................. 1204.2.1, 2702.1 29 CFR Part 1910.1200-1999 Hazard Communication......................................................................2702.1, 3303.6 U.S. Department of Transportation Office of Hazardous Material Safety 1200 NeW Jersey Avenue, SE DTn East Building, 2nd Floor Washington, DC 20590 Standard Referenced reference in code number Title section number 33 CFR Part 154 —1998 Facilities Transferring Oil or Hazardous Material in Bulk..................................................3406.8 33 CFR Part 155 —1998 Oil or Hazardous Material Pollution Prevention Regulations for Vessels...............:..........................34M.8 33 CFR Part 156 —1998 Oil and Hazardous Material Transfer Operations.........................................................3406.8 49 CFR Parts 100-185-2005 Hazardous Materials Regulations.........................................2605.4, 3003.2, 3203.4.3, 3203.7, 3301.1, 3301.1.3, 3301.3, 3302.1, 3406.5.1.15 49 CFR Part 172-2005 Hazardous Materials Tables, Special Provisions, Hazardous Materials Communications, Emergency Response Information and Training Requirements.........................................3304.6.5.2 49 CFR Part 173-2005 Shippers --General Requirements for Shipments and Packagings............................................3306.3 49 CFR Part 173.137-2005 Shippers —General Requirements for Shipments and Packagings: Class 8—Assignment of Packing Group........... 3102.1 U.S. Department of Treasury c/o Superintendent of Documents. DUTY U.S. Government Printing Office Washington, DC 20402-9325 Standard Referenced reference in code number Title - cectinn nnmher 27 CFR Part 55-1998 Commerce in Explosives, as amended through April 1, 1998...................................... 3302.1, 3304.6.5.2 European Committee for Standardization (EN) Central Secretariat ENRue jv de Stassart 36 B-10 50 Brussels Standard Referenced y reference in code number Title section number European Standard EN 1081 1998 Resilient Floor Coverings —Determination of the Electrical Resistance ...............................2209.5.1.1 548 2010 CALIFORNIA FIRE CODE REFERENCED STANDARDS Environmental Protection Agency Ariel Rios Building EPA 1200 Pennsylvania Avenue, NW Washington, DC 20460 Standard Referenced reference in code number Title section number 40 CFR Part 355-2008 Emergency Planning and Notification ..........:..:... .....:.....:.....:...............................H101.4 FederalCommunications Commission Wireless Telecommunications Bureau (WTB) FCC 445 12th Street, SW Washington, DC 20554 Standard Referenced reference in code number Title section number 47 CFR Part 90.219-2007 Private Land Mobile Radio Services —Use of Signal Boosters....... .............. .......................J103.2.5 Factory Mutual Standards Laboratories Department F]� /T 1151 Boston -Providence Turnpike 1 rl Norwood, MA 02062 Standard Referenced reference in code number Title section number 3260-00 Radiant Energy -Sensing Fire Detectors for Automatic Fire Alarm Signaling 3011-99 Approval Standard for Central Station Service for Fire Alarm and Protective Equipment Supervision ............. 907.7.5.2 4430-80 Acceptance Criteria for Smoke and Heat Vents ..:.......................................................910.3.1 International Code Council, Inc. IC 500 New Jersey Avenue, NW, 6th Floor Washington, DC 20001 Standard Referenced reference in code number Title section number ICC 300-07 Standard on Bleachers, Folding and Telescopic Seating and Grandstands.....:..............................1028.1.1 ICC ES AC 331 Acceptance Criteria for Smoke and Heat Vents..........................................................910.3.1 ICC ES AC 77 Acceptance Criteria for Smoke Containment Systems Used with lire -resistance -rated Elevator Hoistway Doors and Frames..............................................................707.14.1 IWUIC-09 International Wildland-Urban Interface Code..........................................................B103.3 International Organization for Standardization (ISO) ISO Central Secretariat ISO 1 ch, de la Voie-Creuse, Case postale 56 CH-1211 Geneva 20, Switzerland Standard Referenced reference in code number Title section number ISO 8115-86. Cotton Bales —Dimensions and Density ........................................Table 1804.2.2.1, Table 2703.1.1(1) National Electrical Manufacturer's Association NEMA 1300 N. 17th Street, Suite 1752 Rosslyn, VA 22209 Standard Referenced reference in code number Title section number 250-2003 Enclosures for Electrical Equipment (1,000 Volt Maximum)................................................3705.2 2010 CALIFORNIA FIRE CODE 549 :REFERENCED STANDARDS National Fire Protection Association NFPA 1 BatterQuincy, A 02 Park l� Quincy, MA 02169-7471 Standard Referenced reference in code number Title section number 10-07 Portable Fire Extinguishers ......................... ........................Table 901.6.1, 906.2, 906.3, Table 906.3(1), Table 906.3(2), 906.3.2, 906.3.4, 2106.3, I101.1 y 11-05 Low-, Medium- and High -expansion Foam ................................................ ..904.7, 3404.2.9:2.2 12--05 Carbon Dioxide Extinguishing Systems...............................................Table 901.6.1, 904.8, 904.11 12A-04 Halon 1301 Fire Extinguishing Systems ......................................................Table 901.6.1, 904.9 13-10 Installation of Sprinkler Systems as amended*..............................903.3.1.1, 903.3.2, 903.3.5.1.1, 903.3.5.2, 904.11, 905.3.4,.901.7.3, 2301.1, 2304.2,'1Mble 2306.2, 2306.9, 2307.2, 2307.2.1, 2308.2.2, 2308.22.1, 2308.4 2310.1, 2501.1, 2804.1, 2806.5.7, 3404.3.3.9, Table 3404.3.6.3(7), 3404.3.7.5.1, 3404.3.8.4 NFPA 13, Amended Sections as follows: I I *Revise Section 2.2 and add publications as follows: 2.2 NFPA Publications. NFPA. 25, Standard for the Inspection, Testing, and Maintenance of Water -Based Fire Protection Systems, 2006 California edition. *Revise Section 8.15.1.2.15 as follows: 8.15.1.2.15 Exterior columns under 10 fe (0.93m) in total area, formed by studs or wood joist, with no sources of ignition within the column, -supporting exterior canopies that are fully protected with a sprinkler system, shall not require sprinkler protection. Revise Section 8.15.7.1 * as follows: 8.15.7.1* Unless the requirements of 8.15.7.2 are met, sprinklers shall be installed under exterior roofs, canopies, porte-cochere, balconies, decks, or similar projections exceeding 4 ft (1,2 m) in width. Revise Section 8.I5.7.2* as.follows: i 8.15.7.2* Sprinklers shall be permitted to be omitted where the canopies, roofs, balconies, decks, or similar projections are constructed with materials that are noncombustible, limited -combustible, or fire retardant treated wood as defined in NFPA 703, Standard for Fire Retardant —Treated Wood and Fire -Retardant Coatings for Building Materials. Delete Section A.8.15.7.2 of Annex >lI Revise Section 8.15.7.3 8.15.7.3 Sprinklers shall be permitted to be omitted from below the canopies, roofs, balconies, decks, or similar projections are combustible construction, provided the exposed finish material on the roof, or canopy is noncombustible, limited - combustible, or fire retardant treated wood as defined in NFPA 703, Standard for Fire Retardant —Treated Wood and Fire - Retardant Coatings for Building Materials, and the roofs, or canopies contains only sprinklered concealed spaces or any of the following unsprinklered combustible concealed spaces: (1) Combustible concealed spaces filled entirely with noncombustible insulation (2) Light or ordinary hazard occupancies where noncombustible or limited -combustible ceilings are directly attached to the bottom of solid wood joists so as to create enclosed joist spaces 160 ft3 (4.5 m3) or less in volume, including space below insulation that is laid directly on top or within the ceiling joists in an otherwise sprinklered attic [See 11.2,3.1.4(4)(d)]. (3) Concealed spaces over isolated small roofs, or canopies not exceeding 55 f? (5.1 Delete language to section 8.15.7.4 and reserve section number.. 8.15.7A. Revise Annex Section A.8.15.7.5 as follows: A.8.15.7.5 The presence of planters, newspaper machines and similar items, should not be considered storage. Add new Sections 8.16.1.1.1.4 and 8.16.1.1.1.5 as follows: 8.16.1.1.1.4 Where a system includes floor control valves, a hydraulic design -information sign containing information for the floor shall be provided at each floor control valve. A hydraulic design information sign shall be provided for each area calculated. The installing contractor shall identify a hydraulically designed sprinkler system with a permanently marked weatherproof metal or rigid plastic sign secured with corrosion resistant wire, chain or other approved means. Such signs shall be placed at the alarm valve, dry pipe valve, preaction valve or deluge valve supplying the corresponding hydraulically designed area. 8.16.1.1.1.5 Control valves, check valves, drain valves and antifreeze valves shall be readily accessible for inspection, testing, and maintenance. Valves located more than 7 feet (2134 mm) above the finished floor shall be provided with a means of opening and closing the valve from the floor level. 550 2010 CALIFORNIA FIRE CODE REFERENCED STANDARDS NFPA—continued Revise Section 8.16.1.5.1 as follows: 8.16.1.5.1 Private fire service main systems shall have sectional control valves at appropriate points in order to permit sectionalizing the system in the event of a break or for the making of repairs or extensions. Add new Sections 8.16.1.5.1.1, 8.16.L5.1.2 and 8.16.1.5.1.3 as follows: 8.16.1.5.1.1 Sectional control valves are not required when the fire service main system serves less than six fire appurtenances. 8.16.1.5.1.2 Sectional control valves shall be indicating valves in accordance with Section 6.7.1.3. 8.16.1.5.1.3 Sectional control valves shall be located so that no more than five fire appurtenances are affected by shut -down of any single portion of the fire service main. Each fire hydrant, fire sprinkler system riser and standpipe riser shall be considered a separate fire appurtenance. In -rack sprinkler systems shall not be considered as a separate appurtenance. 8.16.1.5.1.4 The number of fire appurtenances between sectional control valves is allowed to be modified by the authority having jurisdiction. Revise Section, 8.16.1.5.2 as follows: 8.16.15.2 A valve shall be provided on each bank where a main crosses a body of water or outside the building foundation(s) where the main or section of main runs under a building. Add new Section 9.1.3.9.1.1 as follows: 9.1.3.9.1.1 Powder -driven studs used for attaching hangers to the building structure are prohibited in Seismic design Categories C, D,`E and F. Add a new sentence to the beginning of Section 9.3.5.8.9as follows: 9.3.5.8.11 Where threaded pipe is used for sway bracing, it shall have'a wall thickness of not less then Schedule 40. Replace Section 9.3.5.9.4 as follows: Lag screws or power -driven fasteners shall not be used to attach braces to the building structure. Add language to the beginning of Section 9.3.5.9.6 as follows: 9.35.9.6 Fastening methods other than those identified in 9.3.5.9 and 9.3.7.8 shall not apply to other fastening methods, which shall be acceptable for use if certified by a registered professional engineer to su_ pport the loads determined in accordance with the criteria in 9.3.5.6. Calculations shall be submitted to the authority having jurisdiction. Revise Section 9:3.5.9.7.2* as follows: 93.5.9.7.2* Concrete anchors other than those shown in Figure 9.3.5.9.1 and identified in 9.3.5.8.10 shall be acceptable for use where designed in accordance with the requirements of the building code and certified by a registered professional engineer. Revise Section 9.3.6.1(3) as follows: 9.3.6.1 *(3) No. 1$ 440 lb (200Kg) wire installed at least 45 degrees from the vertical plane and anchored on both sides of the pipe. Powder -driven fasteners for attaching restraint is allowed to be used provided that the restraint component does not support the dead load. Revise Section 10.6.5 as follows: 10.6.5 Pipe joints shall -not be located under foundation footings. The pipe under the building or building foundation shall not contain mechanical joints. Exceptions: 1. Where allowed in accordance with 10.6.2. 2. Alternate designs may be utilized where designed by a registered professional engineer and approved by the enforcing agency. Revise Section 11.2.3.1.4(4)(i) as follows: 11.2.3.1.4(4)(i) Exterior columns under 10 f? (0.93 mZ) in total area, formed by studs or wood joist, with no sources of I I ignition within the column, supporting exterior canopies that are fully protected with a sprinkler system. Revise Section 11.2.3.2.3.1 as follows: 11.23.2.3.1 Where listed quick -response sprinklers, excluding including extended coverage quick -response sprinklers, are used throughout a system or portion of a system having the same hydraulic design basis, the system area of operation shall be permitted to be reduced without revising the density as indicated in Figure 11.2.3.2.3.1 when all of the following conditions are satisfied: (1) Wet pipe system (2) Light hazard occupancy (3) 20 ft (6.1 m) maximum ceiling height (4) There are no unprotected ceiling pockets as allowed by 8.6.7 and 8.8.7 exceeding 32 fe (3 m2) 2010 CALIFORNIA FIRE CODE 551 REFERENCED STANDARDS M, 40 c rn �N v 30 0 c 0 B 20 v ID 10 d o_ 10 20 30 Ceiling height (tt) -axis Note: y = 2 55 For ceiling -height >_.10 ft and <_ 20 ft, y 55 For ceiling height < 10 ft, y = 40 For ceiling height > 20 ft, y = 0 For SI units, 1 ft = 0.31 in. FIGURE 11.2.3.2.3.1 Design Area Reduction for Quick -Response Sprinklers. Revise Section 11.2.3.2.3.2 as follows: 11.2.3.2.3.2 The number of sprinklers in the design area shall never be less than seven. Add Section 24.1(5) 24.1 Approval of Sprinkler Systems and Private lire Service Mains. The installing contractor shall do the following: (1) Notify the authority having jurisdiction and the property owner or property owner's authorized representative of the time and date testing will"be performed. (2)'-Perform all required testing (see Section 24.2) (3) Complete and sign the appropriate contractor's material and test certificate(s) (see Figure 24.1) (4) Remove all caps and straps prior to placing the sprinkler system in service (5) Upon system acceptance by the authority having jurisdiction a label prescribed by; California Code of Regulations, Title 19, Chapter 5 shall be axed to each system riser. Revise Section 24.4(2) and Add Section 24.4(3) as follows: 24.4 Instructions. The installing contractor shall provide the property owner or the property owner's authorized representative with the following: (1) All literature and instructions provided by the manufacturer describing proper operation and maintenance of any equipment and devices installed (2) NFPA 25, Standard for the Inspection, testing, and maintenance of Water -Based Fire Protection Systems, I I 2006 California Edition (3) California Code of Regulations, Title 19, Chapter 5, "Fire Extinguishing Systems." . Add sentence at the end of Section 24.5.1 as follows: I I 24.5.1 "Pipe schedule systems shall be provided with a sign indicating that the system was designed and installed as a pipe schedule system and the hazard classification(s) included in the design." Revise Section 24.5.2(3) and Add Sections_ 24.5.2(7) to (14) as follows: 24.5.2 The sign shall include the following information: 'i (3) Required flow and pressure of the system at the base of the riser (7) Required flow and pressure of the system at the water supply -source: (8) Required flow and pressure of the systemat the discharge side of the fire pump where afire pump is installed- (9) Type or types and number of sprinklers or nozzles installed including the orifice size, temperature rating, orientation, K-Factor, sprinkler identification number (SIN) for sprinkler heads when applicable and response type. (10) The minimum discharge flow rate and pressure required from the hydraulically most demanding sprinkler. (11) The required pressure settings for pressure reducing valves. (12) For deluge sprinkler systems, the required flow and pressure at the hydraulically most demanding sprinkler or nozzle. (13) The protection area per sprinkler based on the hydraulic calculations (14) The.edition ofNFPA 13 to which the system was designed and installed. 552 2010 CALIFORNIA FIRE CODE RESOLUTION NO. 2010-176 A RESOLUTION OF THE CITY COUNCIL OF THE CITY OF VERNON MAKING EXPRESS FINDINGS AND DETERMINATIONS THAT MODIFICATIONS TO THE 2010 CALIFORNIA FIRE CODE ARE REASONABLY NECESSARY BECAUSE OF LOCAL.CLIMATI.C, GEOLOGICAL OR TOPOGRAPHICAL CONDITIONS WHEREAS, Health and Safety Code Section 17958 provides that the City of Vernon may adopt ordinances and regulations imposing the same or modified requirements as are contained in the regulations adopted by the State pursuant to Health and Safety Code Section 17722; and WHEREAS, the State of California is mandated by Health and Safety Code Section 17922 to impose the same requirements as are contained in the most recent edition of the California Building Standards Administrative Code, the California Building Code, the California Residential Code, the California Electrical Code, the California Mechanical Code, the California Plumbing Code, the California Energy Code, the California Historical Building Code, the California Fire.Code, the California Existing Building Code, the California Green Building Standards Code and the California Reference Standards Code (hereinafter referred to collectively as "Codes"); and WHEREAS, Health and Safety Code Section 17598.7(a) permits the City to make modifications or changes to the Codes, which are reasonably necessary because of local climatic, geological or topographical conditions; and WHEREAS, Health and Safety Code Section 17958.7 requires that the City Council, before making any modifications or changes to the Codes, shall make an express finding that such changes or modifications are reasonably necessary because of local climatic, geographic or topographic conditions. NOW, THEREFORE, THE CITY COUNCIL OF THE CITY OF VERNON DOES ..HEREBY FIND, DETERMINE AND RESOLVE AS FOLLOWS: SECTION 1: The Fire Department has recommended that changes and modifications be made to the Codes and have advised that certain said changes and modifications to the 2010 Edition of the California Fire Code, are reasonably necessary due to local conditions in the City of Vernon as described below: A. Administrative Amendments. These amendments are necessary for administrative clarification and do not modify a Building Standard pursuant to Sections 17958, 17958.5, and 17958.7 of the California Health and Safety Code. These amendments.establish administrative standards for the effective enforcement. of building standards throughout the City of Vernon. B. Amendments Justified on the Basis of a Local Climatic Condition. The seasonal climatic conditions during the late summer and fall create severe fire hazards to the public health and welfare in the City of Vernon. The hot, dry weather in combination with Santa Ana winds results in extreme fire conditions for the community. The aforementioned conditions combined with the geological characteristics. of the county and near the City create hazardous conditions for which departure from the California Building Standards Code is required. C. Amendments justified on the Basis of Local Geological Condition. The City of Vernon is subject to earthquake hazards caused by its location in an active seismic activity area. Faults which potentially cause seismic activity in the City include the Whittier Fault to the east, the Raymond Fault to .the north, and the Newport - Inglewood Fault to the west. Said faults are generally considered major 2 Southern California earthquake faults which may experience rupture at, any time. Thus, because the City is within seismic area which includes earthquake faults within the County of Los Angeles and near the City, the modifications and changes cited herein are designed to better limit property damage as a result of seismic activity and to establish criteria for repair of damaged property following a local emergency. D. Amendments Justified on the Basis of Local Topographical Condition. The.of the City of Vernon is coupled with the density of buildings,.limited setbacks,, narrow access to buildings, narrow streets potentially create a problem for governmental agencies to respond to emergency conditions. Additionally, long periods of dry, hot weather, combined with unpredictable seasonal winds (Santa Ana wind conditions) result in increased exposure to fire risk. The heavy rains tend to over -saturate the soil for a short time period during the year, having a detrimental effect on in -ground structures affected by varying moisture conditions. Section 2: Amendments to the 2010 Edition of the California Fire Code, as contained in City of Vernon Ordinance No. 1177, are found reasonably necessary based on the climatic, geological and/or topographical conditions cited above in Paragraphs B, C and D of Section 1 of this Resolution and are listed as follows: Fire Code Section Justification Rationale 104.7.2 Administrative This amendment provides investigation assistance when the fire code official requires reinforcement and validation of origin, cause, and circumstances of an emergency event or explanations to the threat or risk of an identified problem. 104.12 Administrative IFire apparatus and personnel respond to 3 Fire Code Justification Rationale Section numerous false alarm responses due to owner/occupants not maintaining their fire alarm and/or fire protection systems. The time taken to respond to these non -emergency incidents can limit the ability of emergency responders to be available for response to legitimate emergencies and calls for assistance. The City should have the ability to collect for this additional work with the rationale that the owner or responsible party will maintain their fire alarm and/or fire protection systems if a penalty is incurred for the false alarm. 104.13 Administrative, At times, vehicles are left positioned on Climatic, thoroughfare locations that restrict and Geological, block access to emergency vehicles. This Topographical act can impede the ability of emergency responders to arrive, investigate, and function at the scene of the incident on a timely basis, potentially causing more harm, damage, and property loss. Operators have the responsibility to position their -vehicles in locations that will not hamper emergency responders from doing they're job. 104.14 Climatic, At times, stock, product, materials, and Geological, vehicles are left at sites that restrict Topographical and block access to emergency vehicles or obstruct ingress/egress to emergency personnel. This act can impede the ability of emergency responders to safety and quickly function at the scene of the incident, potentially causing more harm, damage, and property loss. Owners, occupants, and operators have the responsibility to position their product, materials, and vehicles in locations that will not hamper emergency responders from doing they're job. 104.15 Administrative Occasionally scheduled activities endorsed by property owners, their agents, and production companies occur at locations and facilities in the City that require guidance and service in the Fire Code Justification Rationale Section preservation of life and property. Approving fire safety personnel, trained to recognize and eliminate unsafe acts, prevent fires, and other hazardous actions will save life and property in the City. 105.1.4 Administrative. The City Council shall set forth the permit and plan review fees by resolution in order to ensure sufficient funds are collected for services provided. From time to time occupants construct and/or. modify the structure, building, -facility or operation without providing plans or obtaining a permit for the changes. The City should have the ability to collect for this investigational work. 105.1.1 Administrative Certain activities historically have been hazardous at work locations. Operational permits annually regulate these activities to reduce or eliminate the risks, whereas construction permits direct the building or installation of specific operational systems or functions. Permits must be posted conspicuously, either permanently or for a limited time, for view by inspectors. 105.6.25 Climatic, Large amounts of loose wood products are Geological, a fire hazard. Currently, this permit Topographical does not incorporate pallet storage. This addition will standardize storage practices at facilities .that store substantial amounts of pallets in the City. 105.6.48 Climatic, Currently, some activities or operations Geological, occur at locations that increase the Topographical potential for loss of life or property. This permit addresses these activities and operations by regulating safer practices at facilities .in the City. 105.7.15 Administrative, Currently, this permit is not listed in Climatic, the CFC. The addition of this Geological, construction permit will standardize the Topographical installation of high -piled combustible storage in racks along with the . requirement of providing a floor plan. Fire Code Section Justification Rationale The addition of this requirement will direct safer storage within buildings and facilities. 105.7.11.1 climatic, Unregulated installations of solar Geological, photovoltaic systems, garden, and Topographical landscaping located on the roofs of buildings can create conditions which severely hinder firefighting ventilation operations. Firefighting ventilation allows the escape of heat, smoke, and gases from the interior compartments of a building, reduces the chances of flashover condition, and greatly helps restore and maintain a tenable interior environment in a building during afire. In many firefighting situations, roof top vertical ventilation is the only form of ventilation that can be employed to meet the need to quickly and effectively ventilate a building's interior. Rapid ventilation is often a critical element in allowing firefighters to enter a burning building to search for and rescue occupants, control the spread of fire, and create a tenable environment to extend the time a person could survive within a burning building. In order to traverse a roof to place an effective ventilation opening near a fire, it is required that firefighters have access to the roof surface of a building. Firefighters utilize techniques including "sounding" roofs with tools such as a rubbish hook, cutting small inspection holes with power saws in roofs to check for extension, and by using infrared cameras to check for heat concentrations on the surface of a roof. Installing roof obstructions without regard •for fire -fighting ventilation operations may prevent firefighters from safely traveling along strong underlying roof structural members. Installing layers of waterproofing, building material, soil, Fire Code Justification Rationale Section and vegetation to the surface of a roof will very likely delay or preclude firefighting roof top ventilation operations unless consideration for ventilation operations were incorporated into'the layout design of the roof obstruction. 105.8 Administrative The permittee and/or its agents shall be held responsible to ensure its work complies with the code and with other regulations or laws adopted by the State and this responsibility should not be shifted in any way to the City or its employees. 108.1 Administrative The city council shall act as a board of appeals making'a correct determination of any appeal of orders, decisions or determinations made by the fire code official relative to the application and interpretation of the California Fire Code. The fire code official shall be an ex officio member of said board to assist in the interpretation of the code, but shall have not vote on any matter before the board.. 113.6 Administrative This amendment provides the Fire Department with administrative provisions for the establishment and review of fees for services. 113.7 Administrative Certain business operations create additional potential hazards at the workplace. These hazards are regulated by the fire code, and may require a specialized inspection. The City Council shall set forth the permit fees by resolution in order to ensure sufficient funds are collected for services provided. The City should have the ability to collect for this additional work. 113.8 Administrative The City Council shall set forth the permit and plan review fees by resolution in order to ensure sufficient funds are collected for services provided. From time to time permittees call for an Fire .Code Justification Rationale Section inspection when the work has not been completed or is not performed in conformance with the 'plans causing the City to re -inspect the work. The City should have the ability to collect for this additional work. 113.9 Administrative From time to time permittees call for an inspection when the work has not been completed or is not performed in conformance with the plans causing the City to re -inspect the work. The City should have the ability to collect for this additional work. 114 Administrative, The owner, occupant and/or its agents Climatic, shall be held responsible to ensure that Geological, safety and preventative measures are Topographical provided for employees, visitors, and emergency responders by maintaining fire prevention within its buildings, facilities, storage and processes. If the owner or occupant does not comply with the established codes and regulations, fees and/or penalties can be imposed. The City should have the. ability to recover the costs of these expenses from the violator(s). 202 Administrative Definitions for fire chief and fire code official are imprecise. These modifications are specific to Vernon Fire Department. The definitions for awning, false alarm, fire safety officer and safety container were not included in section 2 of the CFC and are referenced in the adoptions, so by including them, the terms are identified. 304.1.1.1 Administrative, Unregulated installations of solar Climatic, photovoltaic systems, garden, and Geological, landscaping located on the roofs of Topographical buildings can create conditions which severely hinder firefighting ventilation operations. Firefighting ventilation allows the escape of heat, smoke, and gases from the interior compartments of a building, reduces the chances of flashover condition, and greatly helps Fire Code Justification Rationale Section restore and maintain a tenable interior environment in a building during a fire. In many firefighting situations, roof top vertical ventilation is the only form of ventilation that can be employed to meet the need to quickly and effectively ventilate a building's interior. Rapid ventilation is often a critical element in allowing firefighters to enter a burning building to search for and rescue occupants, control the spread of fire, and create a tenable environment to extend the time a person could survive within a burning building. In order to traverse a roof to place an effective ventilation opening near a fire, it is required that firefighters have access to the roof surface of a building. Firefighters utilize techniques including "sounding" roofs with tools such as a rubbish hook, cutting small inspection holes with power saws in roofs to check for extension, and by using infrared cameras to check for heat concentrations on the surface of a roof. Installing roof obstructions without regard for firefighting ventilation operations may prevent firefighters from safely traveling along strong underlying roof structural members. Installing layers of waterproofing, building material, soil, and vegetation to the surface of a roof will very likely delay or preclude firefighting rooftop ventilation operations unless consideration for ventilation operations were incorporated into the layout design of the roof obstruction. 311.2.2 Climatic, Vacant premises that have fire protection Geological, systems installed must be required to Topographical maintain the systems to function in case of a fire. 312.2 Administrative, The City of Vernon is an industrial city, Topographical with large trucks, tractor -trailers, and Fire Code Justification Rationale Section heavy equipment moving on public and private roadways and property. Occasionally large vehicles strike protective guard posts bending, breaking and pushing them against fire protection equipment,, hazardous materials containers, and other specialized appliances the posts are designed to protect. This code modification increases the requirements of the guard posts, thus providing better protection of the equipment. 315.3.3 Climatic, Large amounts of loose wood products are Geological, a fire hazard. This addition will Topographical standardize storage practices at facilities that store substantial amounts of pallets in the City, and provide the fire department avenues to access the product piles if a fire occurs. 315.3.4 Climatic, Significant volume pallet storage Geological, increases the potential for loss due to Topographical the increased fire load. Keeping pallet stacks organized and orderly will assist in limiting the potential for pallets falling over and restricting fire spread. 315.3.4.1 Climatic, Combustible rubbish tends to.accumulate Geological, around pallet stacks. These light fuels Topographical allow combustion to occur more readily if not cleaned up. Large amounts of pallet materials add to the fire hazard. This addition will standardize storage practices at facilities that stockpile substantial amounts of pallets in the City, and provide the fire department avenues.to access the product piles if a fire occurs. 315.3.4.2 Climatic, Climatic, geologic, and topographic Geological, events or conditions may cause pallets to Topographical fall onto a structure/awing potentially causing serious injury or death & extensive property damage. 503.2.1 Administrative, The Fire Department emergency vehicles Topographical are very large and difficult to maneuver when restrictions are placed on them during incidents. Additionally, some 10 Fire Code Section Justification Rationale vehicles have outrigger supports that extend the footprint of the vehicle beyond the prescribed access road dimensions in the current fire code. This code modification increases the requirements of the fire apparatus access roads, thus providing sufficient space for movement and placement of emergency equipment. This change was previously adopted and included in Ordinance 1137. 504.4 Administrative, Unregulated installations of solar Climatic, photovoltaic systems, garden, and Geological, landscaping located on the roofs of Topographical buildings can create conditions which severely hinder firefighting ventilation operations. Firefighting ventilation allows the escape of heat, smoke, and gases from the interior compartments of a building, reduces the chances of . flashover condition, and greatly helps restore and maintain a tenable interior environment in a building during a fire. In many firefighting situations, roof top vertical ventilation is the only form of ventilation that can be employed to meet the need to quickly and effectively ventilate a building's interior.• Rapid ventilation is often a critical element .in allowing firefighters to enter a burning building to search for and rescue occupants, control the spread of fire, and create a tenable environment to extend the time a person could survive within a burning building. In order to traverse a roof to place an effective ventilation opening near a fire, it is required that firefighters have access to the roof surface of a building. Firefighters utilize techniques including "sounding" roofs with tools such as a rubbish hook, cutting small inspection holes with power saws in roofs to check for extension, and by using infrared cameras to check for. heat concentrations on the surface of a 11 Fire Code Justification Rationale Section roof. Installing roof obstructions without regard for firefighting ventilation operations may prevent firefighters from safely traveling along strong underlying roof structural members. Installing layers of waterproofing, building material, soil, and vegetation to the surface of a roof will very likely delay or preclude firefighting roof top ventilation operations unless consideration for ventilation operations were incorporated into the layout design of the roof obstruction. 507.5 Administrative, The City of Vernon has established Climatic, standards for the spacing of fire Geological, hydrants. This change was previously Topographical adopted and included in Ordinance 1137. 507.5.5 Administrative, The City of Vernon has established Climatic, standards for regulating the clear space Geological, around fire hydrants. This spacing Topographical standard assists in providing fire department apparatus direct access to fire hydrants. This change was previously adopted and included in Ordinance 1137. 901.4.5 Administrative, The City of Vernon is an industrial city, Topographical with large trucks, tractor -trailers, and heavy equipment moving on public and private roadways and property. Occasionally large vehicles strike protective guard posts bending, breaking and pushing them against fire protection equipment, hazardous materials containers, and other specialized appliances the posts are designed to protect. This code modification increases the requirements of the guard posts, thus providing better protection of the equipment. 1504.2 Climatic, This code was amended to include Geological, regulations for spray finishing Topographical operations that may occur outside. This change was previously adopted and included in Ordinance 1137. 12 Fire Code Justification Rationale Section 3301.1 Climatic, Allowing explosive materials in or near Geological, densely positioned structures along with Topographical a sizeable general population creates an untenable potential for the City and its business activities. 3404.2.9.6.1 Climatic, This code was amended to address storage Geological, and the separation from schools, and to Topographical define the volume of product stored. This change was previously adopted and included in Ordinance 1137. 3801.4 Climatic, Inside storage or use of LP -gas creates Geological, problems that can compromise workplace Topographical safety and potentially cause or add to the danger of fire department personnel fighting fires. LP -gas cylinders have been struck, fallen over and been damaged, leaked and rocketed around, and exploded when exposed to heat and fire. 3803.2.2.1 Climatic, Inside storage or use of LP -gas creates Geological, problems that can compromise workplace Topographical safety and potentially cause or add to the danger of fire department personnel fighting fires. LP -gas cylinders have been struck, fallen over and been damaged, leaked and rocketed around, and exploded when exposed to heat and fire. 3804.1 Climatic, This code was amended to address storage Geological, and the separation from schools, and to Topographical define the volume of product stored. This change was previously adopted and included in Ordinance 1137. 3804.3.2 Climatic, Improperly positioned containers of Geological, pressurized flammable gas pose a Topographical significant fire and safety hazard to facilities, employees, and emergency responders. Appendix C Administrative Appendix C of the California Fire Code provides requirements for the locations and distribution of fire hydrants. The City of Vernon currently establishes standards for Fire Hydrant Location and Distribution. The requirements within the Fire Code would conflict with the City's requirements; therefore it is recommended that Appendix C of the 13 Fire Code Justification Rationale Section California Fire Code be deleted. D103.1 Administrative Appendix D of the California Fire Code provides requirements for fire apparatus access roads. Previous City Codes have. been amended to establish City regulations for Fire Access Road Turnarounds. The requirements within the Fire Code.would conflict with.the City's requirements; therefore dt is recommended that Section D103.1 of Appendix D of the California Fire Code be amended to be in accordance with the City of Vernon standard. This change was previously, adopted and included in Ordinance 1137. K101.1 Administrative K101.2 Climatic, Unregulated installations of solar Geological, photovoltaic systems, garden, and Topographical landscaping located on the roofs of buildings can create conditions which K101.3 Administrative severely hinder firefighting ventilation operations. Firefighting ventilation allows the escape of heat, smoke, and gases from the interior compartments of a building, reduces the chances of flashover condition, and greatly helps restore and maintain a tenable interior environment in a building during a fire. In many firefighting situations, roof top vertical ventilation is the only form of ventilation that can be employed to meet the need to quickly and effectively ventilate a building's interior. Rapid ventilation is often a critical element in allowing firefighters to enter a burning building to search for and rescue occupants, control the spread of fire, and create a tenable environment to extend the time a person could survive within a burning building. In order to traverse a roof to place an effective ventilation opening near a fire, it is required that firefighters have access to the roof surface of a building. Firefighters utilize techniques including "sounding" roofs 14 Fire Code Justification Rationale Section with tools such as a rubbish hook, cutting small inspection holes with power saws in roofs to check for extension, and by using infrared cameras to check for heat concentrations on the surface of a roof. Installing roof obstructions without regard for firefighting ventilation operations may prevent firefighters from safely traveling along strong underlying roof structural members. Installing layers of waterproofing, building material, soil, and vegetation to the surface of a roof will very likely delay or preclude firefighting roof top ventilation operations unless consideration for ventilation operations were incorporated into the layout design of the roof obstruction. K102.1 Administrative These definitions were not included in section 2 of the CFC.but are included in Appendix K for reference inthe adoptions. K103.1 Administrative, Unregulated installations of solar Climatic, photovoltaic systems, garden, and Geological, landscaping located on the roofs of Topographical buildings can create conditions which severely hinder firefighting ventilation K103.2 Climatic, Geological, operations. Firefighting ventilation Topographical allows the escape of heat, smoke, and gases from the interior compartments of a building, reduces the chances of K103.2.1 Climatic, Geological, flashover condition, and greatly helps Topographical restore and maintain a tenable interior environment in a"building during a fire. In many firefighting situations, roof top K103.2.1.1 Climatic, Geological, vertical ventilation is the only form of Topographical ventilation that can be employed to meet the need to quickly and effectively K103.2.1.2 Climatic, ventilate a buildings interior. Rapid Geological, ventilation is often a critical element Topographical in allowing firefighters to enter a burning building to search for and rescue K103:2.1.3 Climatic, occupants, control the spread of fire, Geological,tn 15 Fire Code Justification Rationale Section K103.2.2 K103.2.2.1 K103.2.3 K103.2.4 Topographical Climatic, Geological, Topographical Climatic, Geological, Topographical Climatic, Geological, Topographical Climatic, Geological, Topographical K103.3 Climatic, Geological, Topographical K103.4 Climatic, Geological, Topographical K103.4.1 Climatic, Geological, Topographical K103.4.2 Climatic, Geological, Topographical K103.4.2.1 Climatic, Geological, Topographical K103.4.2.2 Climatic, Geological, Topographical 03.4.2.3 Climatic, Geological, Topographical extend the time a person could survive within a burning building. In order to traverse a roof to place an effective ventilation opening near a fire, it is required that firefighters have access to the roof surface of a building. Firefighters utilize techniques including "sounding" roofs with tools such as a rubbish hook, cutting small inspection holes with power saws in roofs to check for extension, and by using infrared cameras to check for heat concentrations on the surface of a roof. -Installing roof obstructions without regard for firefighting ventilation operations may prevent firefighters from safely traveling along strong underlying roof structural members. Installing layers of waterproofing, building material, soil, and vegetation to the surface of a roof will very likely delay or preclude firefighting roof top ventilation operations unless consideration for ventilation operations were incorporated into the layout design of the roof obstruction. 16 Fire Code Section K103.4.2.4 IK103.4.3 IK103.4.3.1 Justification Climatic, Geological, Topographical Climatic, Geological, Topographical Climatic, Geological, Topographical K103.4.3.2 Climatic, Geological, Topographical K103.4.3.2.1 Climatic, Geological, Topographical X103.4.3.2.2 Climatic, Geological, Topographical K103.4.3.2.3 Climatic, Geological, Topographical K103.4.3.2.4 Climatic, Geological, Topographical K103.4.3.2.5 Climatic, Geological, Topographical K103.4.3.2.6 Climatic, Geological, Topographical K103.5 Climatic, Geological, Topographical IK103.5.1 Climatic, Geological, Rationale 17 Fire Code Justification Rationale Section Topographical K103.5.2 Climatic, Geological, Topographical K103.5.3 Climatic, Geological, Topographical SECTION 3: The City Clerk of the City of Vernon shall certify to the passage, approval and adoption of this Resolution, and the City Clerk of the City of Vernon shall cause this Resolution and the City Clerk's certification to be entered,in the File of Resolutions of the Council of this City. SECTION 4: This Resolution shall take effect upon the effective date of Ordinance No. 1177. APPROVED AND ADOPTED this 6th day of December, 201,0. Name: Hilario Gonzales Title: Mayor / Mayce�A-'? AT.T T Wil and G. agu City Clerk STATE OF CALIFORNIA ) ss COUNTY OF LOS ANGELES ) I, Willard G. Yamaguchi, City Clerk of the City of Vernon, do hereby certify that the foregoing Resolution, being Resolution No. 2010-176, was duly passed, approved.and adopted by the City Council of the City of Vernon at a special meeting of the City Council duly held on Monday, December 6, 2010, and thereafter was duly signed by the Mayor or Mayor Pro-Tem of the City of Vernon. Executed this day of December, 2010, at Vernon, California. (SEAL) illard Gg uco, City Clerk 19 CITY CLERK'S OFFICE ,INTEROFFICE MEMORANDUM DATE: December 13, 2010 TO: Jed Hulsey, Fire Marshal FROM: Willard Yamaguchi, City Clerk RE: Resolution No. 2010-176 A Resol tion of the City Council of the City of Vernon Making Express Findings and Determinations that Modifications to the 2010 California Fire Code Are Reasonably Necessary Because of Local Climatic, Geological or Topographical Conditions Transmitted herewith is a copy of Resolution No. 2010-176 referenced above, which was approved by City Council on December 6, 2010. Thank you. WY:dj Attachment c: Mark Whitworth Ordinance No. 1177 Resolution No. 2010-176 ��. E VERNON FIRE PREVENTION BUREAU INTEROFFICE MEMORANDUM DEC 28 2010 --- - CITY ATMRNEY DEPT, TO: Willard Yamaguchi, City Clerk FROM: Jed Hulsey, Fire Marshal SUBJECT: Ordinance No. 1177 - Fire Code Adoption Transmittal Letter to California Building Standards Commission and Copy of Mail Certification Receipt DATE: 12/28/2010 Per your request, attached is a copy of the transmittal letter recently sent by my office to the California Building Standards Commission (CBSC) regarding Ordinance No. 1177. Additionally attached is a copy of the US Mail certification that the documents were received by the CBSC. Please make the appropriate file recording. Thank You. f ► 01f FIRE DEPARTMENT Mark C. Whitworth, Fire Chief 4305 Santa Fe Avenue, Vernon, California 90058 Telephone (323) 583-8811 Fax (323) 826-1407 December 21, 2010 Certified Mail California Building Standards Commission 2525 Natamos Park Drive, Suite 130 Sacramento, California 95833 Dear California Building Standards Commission, The City of Vernon recently adopted the 2010 California Fire Code with various amendments. Enclosed herewith is a certified copy of the City of Vernon's Ordinance No. 1177 adopting the 2010 California Fire Code along with the City Staff Report, dated November 1, 2010, which set forth the findings for each amendment based on climatic, geological, or topographical conditions. This letter shall serve as the City of Vernon's filing of its modifications to the 2010 California Fire Code along with Vernon's findings determining why each amendment or modification is necessary. If you have any questions you may contact me at (323) 583-8811, ext. 282. Very truly yours, Je Hulsey Fire Marshal EaCcfusivefy Industrial t Since 9 aj^< a z'• ��xs�erxt �xn�x� xx�rCtc�xtinxt�, �xtc� The Only All Hispanic Owned Chain of Bilingual Newspapers 111 S. Avenue 59, Los Angeles, CA 90042-4211 Ph 323.341-7970 • Fax 323.341-7976 • www.egpnews.com PROOF OF PUBLICATION (2015.5 C.C.P.) STATE OF CALIFORNIA, COUNTY OF LOS ANGELES I am a citizen of the United States and a resident of the County aforementioned; I am over the age of eighteen years, and not a party to or interested in the above -entitled matter. I am the principal clerk of the printer of EASTERN GROUP PUBLICATIONS' EASTSIDE SUN, MEXICAN AMERICAN SUN, NORTHEAST SUN, BELL GARDENS SUN, VERNON SUN, COMMERCE COMET, CITY TERRACE COMET, MONTEBELLO COMET, MONTEREY PARK COMET, E.L.A. BROOKLYN BELVEDERE COMET AND WYVERNWOOD CHRONICLE, newspapers of general circulation, printed and published THURSDAYS in the County of Los Angeles, and which newspaper has been adjudicated a newspaper of general circulation by the Superior Court of the County of Los Angeles, State of California, under the date of JUNE 21, 1966, CASE NUMBER 884861; that the notico, of which the annexed is a printed copy (set in type not smaller than nonpareil), has been published in each regular and entire issue of said newspaper and not in any supplement thereof on the following dates, to -wit: SEPTEMBER 15, all in the year 2011. I certify (or declare) under penalty of perjury that the foregoing is true and correct. Dated at LOS ANGELES, California, this 15, day of SEPTEMBER, 2011. This space is for the County Clerk's Filing Stamp CITY OF VERNON Proof of Publication of City of Vernon City Council Meetina September 20, 2011 Summary for Ordinance Nos. 1160 1167. 1169-1181and 1183 Signature x.. I use ,,,�..' �ztsterxt Group 1juhlirafirritz, (�Jjxte_ The Only All Hispanic Owned Chain of Bilingual Newspapers 111 S. Avenue 59, Los Angeles, CA 90042-4211 Ph 323.341-7970 • Fax 323.341-7976 • www.egpnews.com PROOF OF PUBLICATION (2015.5 C.C.P.) STATE OF CALIFORNIA, COUNTY OF LOS ANGELES I am a citizen of the United States and a resident of the County aforementioned; I am over the age of eighteen years, and not a party to or interested in the above -entitled -matter. l am the principal clerk of the printer of EASTERN GROUP PUBLICATIONS' EASTSIDE SUN, MEXICAN AMERICAN SUN, NORTHEAST SUN, BELL GARDENS SUN, VERNON SUN, COMMERCE COMET, CITY TERRACE COMET, MONTEBELLO COMET, MONTEREY PARK COMET, E.L.A. BROOKLYN BELVEDERE COMET AND WYVERNWOOD CHRONICLE, newspapers of general circulation, printed and published THURSDAYS in the County of Los Angeles, and which newspaper has been adjudicated a newspaper of general circulation by the Superior Court of the County of Los Angeles, State of California, under the date of J U N E 21, 19669 CASE NUMBER 884861; that the notice, of which the annexed is a printed copy (set in type not smaller than nonpareil), has been published in each regular and entire issue of said newspaper and not in any supplement thereof on the following dates, to -wit: SEPTEMBER 22, all in the year 2011. I certify (or declare) under penalty of perjury that the foregoing is true and correct. Dated at LOS ANGELES, California, this 22-rdday of SEPTEMBER, 2011. i9nature This space is for the County Clerk's Filing Stamp CITY OF VERNON Proof of Publication of CITY OF VERNON CITY COUNCIL MEETING SEPTEMBER 20, 2011 SUMMARY FOR ORDINANCE NOS. CITY OF VERNON CITY COUNCIL MEETING SEPTEMBER 20, 2011 SUMMARY FOR ORDINANCE NOS. 1160 - 1167, 1169 1181 AND 1183 A CERTIFIED: COPY OF THE FULL TEXT OF ADOPTED ORDINANCE NOS. 1160 — 1167, 1169 — 1181 AND 1183 ARE AVAILABLE IN THE OFFICE OF THE CITY CLERK LOCATED AT 4305 SANTA FE AVENUE, VERNON, CALIFORNIA. Ordinance Nos. 1160 — 1167, 1169 — 1181 and 1183 were duly introduced at a regular meeting of the City Council of the City of Vernon and approved and adopted by said Council at a regular meeting held on September 20, 2011. On September 20, 2011, the City Council of the City of Vernon adopted Ordinance Nos. 1160 —1167, 1169 — 1181 and 1183 amending certain provisions of the Vernon City Code as follows: Ordinance No. 1160 was adopted by the City Council of the City of Vernon amending Sections 13.48 to 13.73 and adding Section 13.74 to Article IV, Hazardous Materials Monitoring Program, of Chapter 13, Health and Sanitation, of the Vernon City Code as follows: 1. To change the title of Article IV of Chapter 13 to Hazardous Materials Monitoring and Control Program; 2. To update and clarify definitions and other provisions in accordance with State hazardous material laws, regulations and regulatory options; 3. To renumber the following sections: Section 13.55 to 13.57, Section 13.57 to 13.55, Section 13.72 to 13.73 and Section 13.73 to 13.74; and 4. To add a section regarding unlawful,hazardous materials management. Ordinance No. 1161 was adopted by the City Council of the City of Vernon adopting. by reference the Department of Water Resources State Model Landscaping Ordinance,. amending Sections 25.100, 25.101, 25.102, 25.103, 25.104, 25.105, 25.106(b), 25.107(a) and adding Section 25.112 to Article VI, Water Conservation of Chapter 25, Water, of the Vernon City Code as follows: l . To meet the requirements of the Metropolitan Water District Model Efficient Landscape Ordinance; and 1 2. To add a section regarding the Department of Water Resources State Model Efficient Landscape Ordinance. Ordinance No. 1162 was adopted by the City Council of the City of Vernon amending Article XIV of Chapter 2 of the Vernon City Code relating to the recall of Members of the City Council. Ordinance No. 1163, an emergency Zoning Ordinance, was adopted by the City Council of the City of Vernon prohibiting the establishment of marijuana dispensaries, stores, co- ops, or marijuana cultivation operations in any zoning district within the City by amending Sections 26.2.9 and 26.4.1-4, of the Vernon_City Code as follows: 1. To add a definition of marijuana dispensary, store, co-op, or cultivation operation; and 2. To prohibit the use in any Zone or Overlay Zone of the City. Ordinance No. 1164, a zoning ordinance, was adopted by the City Council of the City of Vernon prohibiting the establishment of marijuana dispensaries, stores, co-ops, or marijuana cultivation operations in any zoning district within the City by amending Sections 26.2.9 and 26.4.14, of the Vernon City Code as follows: 1. To add a definition of marijuana dispensary, store, co-op, or cultivation operation; and 2. To prohibit the use in any Zone or Overlay Zone of the City. Ordinance No. 1165 was adopted by the City Council of the City of Vernon amending Chapter 2 of the Code of the City of Vernon, relating to City Council elections to implement campaign finance regulations. Ordinance No. 1166 was adopted by the City Council of the City of Vernon temporarily suspending acceptance.and review of non-exclusive solid waste franchise agreement applications.. Ordinance No. 1167 was adopted by the City Council of the City of Vernon amending Chapter 2 of the Code of the City of Vernon, relating to City Council elections and the appointment of Council members in uncontested elections. Ordinance No. 1169 was adopted by the City Council of the City of Vernon abolishing the Police and Fire Commission. Ordinance No. 1170 was adopted by the City Council of the City of Vernon repealing Section 7.3 of the Vernon City Code authorizing the delegation of enforcement responsibilities for certain provisions of the Fire Code and other Fire Safety Regulations. Ordinance No. 1171 was adopted by the City Council of the City of Vernon adding Section 13.88 to the Vernon City Code to establish fees and charges pursuant to the aboveground petroleum storage act. Ordinance No. 1172 was adopted by the City Council of the City of Vernon amending Sections 2.34, 2.35, 2.36, 2.37 and 2.39 of Article V, Public Library, of Chapter 2, Administration, of the Vernon City Code as follows: Establishing a Board of Library Trustees; composition; appointment of members; and 2. Appointing the Mayor as president and the Mayor pro tempore as president pro tempore of the Board of Library Trustees. Ordinance No. 1173 was adopted by the City Council of the City of Vernon amending the Vernon City Code to authorize the Fire Chief to report directly to the City Council and defining the term "reporting to the City Council." Ordinance No: 1174 was adopted by the City Council of the City of Vernon amending the Vernon City Code to clarify that the City Council appoints the purchasing agent. Ordinance No. 1175 was adopted by the City Council of the City of Vernon establishing a three-year restriction on cutting of newly paved or resurfaced streets and amending the Vernon City Code regarding deposits, surety bonds and liability insurance for encroachment permits and licenses. Ordinance No. 1176 was adopted by the City Council of the City of Vernon amending Chapter 24, building and construction, of the Code of the City of Vernon; adopting by reference (1) the 2010 California Building Code; (2) the 2010 California Electrical Code, and the 2006 edition of the ICC Electrical Code administrative provisions; (3) the 2010 California Mechanical Code; (4) the 201.0 California Plumbing Code; (5) the 2010 California Existing Building Code; (6) the 2009 International Existing Building Code; (7). the 2010 California Residential Code; (8) the 2010 California Green Building Standards Code; and (9) the 2010 California Energy Code, including amendments, additions and deletions, and repealing all ordinances and parts of ordinances in conflict therewith. Ordinance No. 1177 was adopted by the City Council of the City of Vernon amending Chapter 7, fire regulation, of the Code of the City of Vernon; adopting by reference the 2010 California Fire Code including amendments, additions and deletions, and repealing all ordinances and parts of ordinances in conflict therewith. Ordinance No: 1178 was adopted by the City Council of the City of Vernon extending the existing time limits for the effectiveness of and the receipt of tax increment for the industrial redevelopment project. Ordinance No. 1179 was adopted by the City Council of the City of Vernon eliminating the existing time limits on incurring debt for the first amended industrial redevelopment project. Ordinance No. 1180 was adopted by the City Council of the City of Vernon amending section 2.1 of the Vernon City Code relating to the time and place of City Council meetings. Ordinance No. 1181 was adopted by the City Council of the City of Vernon extending the existing time limits for commencement of eminent domain proceedings to acquire property within the industrial redevelopment project. Ordinance No. 1183 was adopted by the City Council of the City of Vernon establishing a Housing Commission pursuant to the provisions of the City Charter of the City of Vernon and specifying the membership and duties of the Housing Commission. Willard G. Yamaguchi, City Clerk of the City of Vernon, does hereby certify that Ordinance Nos. 1160 —1167, 1169 —1181 and 1183 were duly introduced and approved by the City Council of the City of Vernon at a regular meeting and adopted and passed by said Council at a regular meeting held on September 20, 2011 by the following roll call vote: AYES: COUNCILMEMBERS: Mayor Gonzales, Davis, McCormick, Maisano, Newmire NOES: COUNCILMEMBERS: None ABSTAIN: COUNCILMEMBERS: None Dated: September.20, 2011 ' _ 1 1llard G. YaOUCi, C t Clerk r,